Rename plugins to libs and update all file references

libs/.npmignore

@@ -0,0 +1,2 @@
+*
+!/plugins/flot-old/

libs/PHPMailer/COMMITMENT

@@ -0,0 +1,46 @@
+GPL Cooperation Commitment
+Version 1.0
+
+Before filing or continuing to prosecute any legal proceeding or claim
+(other than a Defensive Action) arising from termination of a Covered
+License, we commit to extend to the person or entity ('you') accused
+of violating the Covered License the following provisions regarding
+cure and reinstatement, taken from GPL version 3. As used here, the
+term 'this License' refers to the specific Covered License being
+enforced.
+
+    However, if you cease all violation of this License, then your
+    license from a particular copyright holder is reinstated (a)
+    provisionally, unless and until the copyright holder explicitly
+    and finally terminates your license, and (b) permanently, if the
+    copyright holder fails to notify you of the violation by some
+    reasonable means prior to 60 days after the cessation.
+
+    Moreover, your license from a particular copyright holder is
+    reinstated permanently if the copyright holder notifies you of the
+    violation by some reasonable means, this is the first time you
+    have received notice of violation of this License (for any work)
+    from that copyright holder, and you cure the violation prior to 30
+    days after your receipt of the notice.
+
+We intend this Commitment to be irrevocable, and binding and
+enforceable against us and assignees of or successors to our
+copyrights.
+
+Definitions
+
+'Covered License' means the GNU General Public License, version 2
+(GPLv2), the GNU Lesser General Public License, version 2.1
+(LGPLv2.1), or the GNU Library General Public License, version 2
+(LGPLv2), all as published by the Free Software Foundation.
+
+'Defensive Action' means a legal proceeding or claim that We bring
+against you in response to a prior proceeding or claim initiated by
+you or your affiliate.
+
+'We' means each contributor to this repository as of the date of
+inclusion of this file, including subsidiaries of a corporate
+contributor.
+
+This work is available under a Creative Commons Attribution-ShareAlike
+4.0 International license (https://creativecommons.org/licenses/by-sa/4.0/).

libs/PHPMailer/LICENSE

@@ -0,0 +1,502 @@
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

libs/PHPMailer/README.md

@@ -0,0 +1,232 @@
+[![SWUbanner](https://raw.githubusercontent.com/vshymanskyy/StandWithUkraine/main/banner2-direct.svg)](https://supportukrainenow.org/)
+
+![PHPMailer](https://raw.github.com/PHPMailer/PHPMailer/master/examples/images/phpmailer.png)
+
+# PHPMailer – A full-featured email creation and transfer class for PHP
+
+[![Test status](https://github.com/PHPMailer/PHPMailer/workflows/Tests/badge.svg)](https://github.com/PHPMailer/PHPMailer/actions)
+[![codecov.io](https://codecov.io/gh/PHPMailer/PHPMailer/branch/master/graph/badge.svg?token=iORZpwmYmM)](https://codecov.io/gh/PHPMailer/PHPMailer)
+[![Latest Stable Version](https://img.shields.io/packagist/v/phpmailer/phpmailer?label=stable)](https://packagist.org/packages/phpmailer/phpmailer)
+[![Total Downloads](https://img.shields.io/packagist/dt/phpmailer/phpmailer)](https://packagist.org/packages/phpmailer/phpmailer)
+[![License](https://img.shields.io/github/license/PHPMailer/PHPMailer)](https://packagist.org/packages/phpmailer/phpmailer)
+[![API Docs](https://github.com/phpmailer/phpmailer/workflows/Docs/badge.svg)](https://phpmailer.github.io/PHPMailer/)
+[![OpenSSF Scorecard](https://api.securityscorecards.dev/projects/github.com/PHPMailer/PHPMailer/badge)](https://api.securityscorecards.dev/projects/github.com/PHPMailer/PHPMailer)
+
+## Features
+- Probably the world's most popular code for sending email from PHP!
+- Used by many open-source projects: WordPress, Drupal, 1CRM, SugarCRM, Yii, Joomla! and many more
+- Integrated SMTP support – send without a local mail server
+- Send emails with multiple To, CC, BCC, and Reply-to addresses
+- Multipart/alternative emails for mail clients that do not read HTML email
+- Add attachments, including inline
+- Support for UTF-8 content and 8bit, base64, binary, and quoted-printable encodings
+- Full UTF-8 support when using servers that support `SMTPUTF8`.
+- Support for iCal events in multiparts and attachments
+- SMTP authentication with `LOGIN`, `PLAIN`, `CRAM-MD5`, and `XOAUTH2` mechanisms over SMTPS and SMTP+STARTTLS transports
+- Validates email addresses automatically
+- Protects against header injection attacks
+- Error messages in over 50 languages!
+- DKIM and S/MIME signing support
+- Compatible with PHP 5.5 and later, including PHP 8.5
+- Namespaced to prevent name clashes
+- Much more!
+
+## Why you might need it
+Many PHP developers need to send email from their code. The only PHP function that supports this directly is [`mail()`](https://www.php.net/manual/en/function.mail.php). However, it does not provide any assistance for making use of popular features such as authentication, HTML messages, and attachments.
+
+Formatting email correctly is surprisingly difficult. There are myriad overlapping (and conflicting) standards, requiring tight adherence to horribly complicated formatting and encoding rules – the vast majority of code that you'll find online that uses the `mail()` function directly is just plain wrong, if not unsafe!
+
+The PHP `mail()` function usually sends via a local mail server, typically fronted by a `sendmail` binary on Linux, BSD, and macOS platforms, however, Windows usually doesn't include a local mail server; PHPMailer's integrated SMTP client allows email sending on all platforms without needing a local mail server. Be aware though, that the `mail()` function should be avoided when possible; it's both faster and [safer](https://exploitbox.io/paper/Pwning-PHP-Mail-Function-For-Fun-And-RCE.html) to use SMTP to localhost.
+
+*Please* don't be tempted to do it yourself – if you don't use PHPMailer, there are many other excellent libraries that
+you should look at before rolling your own. Try [Symfony Mailer](https://symfony.com/doc/current/mailer.html), [Laminas/Mail](https://docs.laminas.dev/laminas-mail/), [ZetaComponents](https://github.com/zetacomponents/Mail), etc.
+
+## License
+This software is distributed under the [LGPL 2.1](https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html) license, along with the [GPL Cooperation Commitment](https://gplcc.github.io/gplcc/). Please read [LICENSE](https://github.com/PHPMailer/PHPMailer/blob/master/LICENSE) for information on the software availability and distribution.
+
+## Installation & loading
+PHPMailer is available on [Packagist](https://packagist.org/packages/phpmailer/phpmailer) (using semantic versioning), and installation via [Composer](https://getcomposer.org) is the recommended way to install PHPMailer. Just add this line to your `composer.json` file:
+
+```json
+"phpmailer/phpmailer": "^7.0.0"
+```
+
+or run
+
+```sh
+composer require phpmailer/phpmailer
+```
+
+Note that the `vendor` folder and the `vendor/autoload.php` script are generated by Composer; they are not part of PHPMailer.
+
+If you want to use XOAUTH2 authentication, you will also need to add a dependency on the `league/oauth2-client` and appropriate service adapters package in your `composer.json`, or take a look at
+by @decomplexity's [SendOauth2 wrapper](https://github.com/decomplexity/SendOauth2), especially if you're using Microsoft services.
+
+Alternatively, if you're not using Composer, you
+can [download PHPMailer as a zip file](https://github.com/PHPMailer/PHPMailer/archive/master.zip), (note that docs and examples are not included in the zip file), then copy the contents of the PHPMailer folder into one of the `include_path` directories specified in your PHP configuration and load each class file manually:
+
+```php
+<?php
+use PHPMailer\PHPMailer\PHPMailer;
+use PHPMailer\PHPMailer\Exception;
+
+require 'path/to/PHPMailer/src/Exception.php';
+require 'path/to/PHPMailer/src/PHPMailer.php';
+require 'path/to/PHPMailer/src/SMTP.php';
+```
+
+If you're not using the `SMTP` class explicitly (you're probably not), you don't need a `use` line for it. Even if you're not using exceptions, you do still need to load the `Exception` class as it is used internally.
+
+## Legacy versions
+PHPMailer 5.2 (which is compatible with PHP 5.0 — 7.0) is no longer supported, even for security updates. You will find the latest version of 5.2 in the [5.2-stable branch](https://github.com/PHPMailer/PHPMailer/tree/5.2-stable). If you're using PHP 5.5 or later (which you should be), upgrade to a later release.
+
+### Upgrading from 5.2
+The biggest changes are that source files are now in the `src/` folder, and PHPMailer now declares the namespace `PHPMailer\PHPMailer`. This has several important effects – [read the upgrade guide](https://github.com/PHPMailer/PHPMailer/tree/master/UPGRADING.md) for more details.
+
+### Minimal installation
+While installing the entire package manually or with Composer is simple, convenient, and reliable, you may want to include only vital files in your project. At the very least you will need [src/PHPMailer.php](https://github.com/PHPMailer/PHPMailer/tree/master/src/PHPMailer.php). If you're using SMTP, you'll need [src/SMTP.php](https://github.com/PHPMailer/PHPMailer/tree/master/src/SMTP.php), and if you're using POP-before SMTP (*very* unlikely!), you'll need [src/POP3.php](https://github.com/PHPMailer/PHPMailer/tree/master/src/POP3.php). You can skip the [language](https://github.com/PHPMailer/PHPMailer/tree/master/language/) folder if you're not showing errors to users and can make do with English-only errors. If you're using XOAUTH2 you will need [src/OAuth.php](https://github.com/PHPMailer/PHPMailer/tree/master/src/OAuth.php) as well as the Composer dependencies for the services you wish to authenticate with. Really, it's much easier to use Composer!
+
+## A Simple Example
+
+```php
+<?php
+//Import PHPMailer classes into the global namespace
+//These must be at the top of your script, not inside a function
+use PHPMailer\PHPMailer\PHPMailer;
+use PHPMailer\PHPMailer\SMTP;
+use PHPMailer\PHPMailer\Exception;
+
+//Load Composer's autoloader (created by composer, not included with PHPMailer)
+require 'vendor/autoload.php';
+
+//Create an instance; passing `true` enables exceptions
+$mail = new PHPMailer(true);
+
+try {
+    //Server settings
+    $mail->SMTPDebug = SMTP::DEBUG_SERVER;                      //Enable verbose debug output
+    $mail->isSMTP();                                            //Send using SMTP
+    $mail->Host       = 'smtp.example.com';                     //Set the SMTP server to send through
+    $mail->SMTPAuth   = true;                                   //Enable SMTP authentication
+    $mail->Username   = 'user@example.com';                     //SMTP username
+    $mail->Password   = 'secret';                               //SMTP password
+    $mail->SMTPSecure = PHPMailer::ENCRYPTION_SMTPS;            //Enable implicit TLS encryption
+    $mail->Port       = 465;                                    //TCP port to connect to; use 587 if you have set `SMTPSecure = PHPMailer::ENCRYPTION_STARTTLS`
+
+    //Recipients
+    $mail->setFrom('from@example.com', 'Mailer');
+    $mail->addAddress('joe@example.net', 'Joe User');     //Add a recipient
+    $mail->addAddress('ellen@example.com');               //Name is optional
+    $mail->addReplyTo('info@example.com', 'Information');
+    $mail->addCC('cc@example.com');
+    $mail->addBCC('bcc@example.com');
+
+    //Attachments
+    $mail->addAttachment('/var/tmp/file.tar.gz');         //Add attachments
+    $mail->addAttachment('/tmp/image.jpg', 'new.jpg');    //Optional name
+
+    //Content
+    $mail->isHTML(true);                                  //Set email format to HTML
+    $mail->Subject = 'Here is the subject';
+    $mail->Body    = 'This is the HTML message body <b>in bold!</b>';
+    $mail->AltBody = 'This is the body in plain text for non-HTML mail clients';
+
+    $mail->send();
+    echo 'Message has been sent';
+} catch (Exception $e) {
+    echo "Message could not be sent. Mailer Error: {$mail->ErrorInfo}";
+}
+```
+
+You'll find plenty to play with in the [examples](https://github.com/PHPMailer/PHPMailer/tree/master/examples) folder, which covers many common scenarios including sending through Gmail, building contact forms, sending to mailing lists, and more.
+
+If you are re-using the instance (e.g. when sending to a mailing list), you may need to clear the recipient list to avoid sending duplicate messages. See [the mailing list example](https://github.com/PHPMailer/PHPMailer/blob/master/examples/mailing_list.phps) for further guidance.
+
+That's it. You should now be ready to use PHPMailer!
+
+## Localization
+PHPMailer defaults to English, but in the [language](https://github.com/PHPMailer/PHPMailer/tree/master/language/) folder, you'll find many translations for PHPMailer error messages that you may encounter. Their filenames contain [ISO 639-1](https://en.wikipedia.org/wiki/ISO_639-1) language code for the translations, for example `fr` for French. To specify a language, you need to tell PHPMailer which one to use, like this:
+
+```php
+//To load the French version
+$mail->setLanguage('fr', '/optional/path/to/language/directory/');
+```
+
+We welcome corrections and new languages – if you're looking for corrections, run the [Language/TranslationCompletenessTest.php](https://github.com/PHPMailer/PHPMailer/blob/master/test/Language/TranslationCompletenessTest.php) script in the tests folder and it will show any missing translations.
+
+## Documentation
+Start reading at the [GitHub wiki](https://github.com/PHPMailer/PHPMailer/wiki). If you're having trouble, head for [the troubleshooting guide](https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting) as it's frequently updated.
+
+Examples of how to use PHPMailer for common scenarios can be found in the [examples](https://github.com/PHPMailer/PHPMailer/tree/master/examples) folder. If you're looking for a good starting point, we recommend you start with [the Gmail example](https://github.com/PHPMailer/PHPMailer/tree/master/examples/gmail.phps).
+
+To reduce PHPMailer's deployed code footprint, examples are not included if you load PHPMailer via Composer or via [GitHub's zip file download](https://github.com/PHPMailer/PHPMailer/archive/master.zip), so you'll need to either clone the git repository or use the above links to get to the examples directly.
+
+Complete generated API documentation is [available online](https://phpmailer.github.io/PHPMailer/).
+
+You can generate complete API-level documentation by running `phpdoc` in the top-level folder, and documentation will appear in the `docs` folder, though you'll need to have [PHPDocumentor](https://www.phpdoc.org) installed. You may find [the unit tests](https://github.com/PHPMailer/PHPMailer/blob/master/test/PHPMailer/PHPMailerTest.php) a good reference for how to do various operations such as encryption.
+
+If the documentation doesn't cover what you need, search the [many questions on Stack Overflow](https://stackoverflow.com/questions/tagged/phpmailer), and before you ask a question about "SMTP Error: Could not connect to SMTP host.", [read the troubleshooting guide](https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting).
+
+## Tests
+[PHPMailer tests](https://github.com/PHPMailer/PHPMailer/tree/master/test/) use PHPUnit 9, with [a polyfill](https://github.com/Yoast/PHPUnit-Polyfills) to let 9-style tests run on older PHPUnit and PHP versions.
+
+[![Test status](https://github.com/PHPMailer/PHPMailer/workflows/Tests/badge.svg)](https://github.com/PHPMailer/PHPMailer/actions)
+
+If this isn't passing, is there something you can do to help?
+
+## Security
+Please disclose any vulnerabilities found responsibly – report security issues to the maintainers privately.
+
+See [SECURITY](https://github.com/PHPMailer/PHPMailer/tree/master/SECURITY.md) and [PHPMailer's security advisories on GitHub](https://github.com/PHPMailer/PHPMailer/security). 
+
+## Contributing
+Please submit bug reports, suggestions, and pull requests to the [GitHub issue tracker](https://github.com/PHPMailer/PHPMailer/issues).
+
+We're particularly interested in fixing edge cases, expanding test coverage, and updating translations.
+
+If you found a mistake in the docs, or want to add something, go ahead and amend the wiki – anyone can edit it.
+
+If you have git clones from prior to the move to the PHPMailer GitHub organisation, you'll need to update any remote URLs referencing the old GitHub location with a command like this from within your clone:
+
+```sh
+git remote set-url upstream https://github.com/PHPMailer/PHPMailer.git
+```
+
+Please *don't* use the SourceForge or Google Code projects any more; they are obsolete and no longer maintained.
+
+## Sponsorship
+Development time and resources for PHPMailer are provided by [Smartmessages.net](https://info.smartmessages.net/), the world's only privacy-first email marketing system.
+
+<a href="https://info.smartmessages.net/"><img src="https://www.smartmessages.net/img/smartmessages-logo.svg" width="550" alt="Smartmessages.net privacy-first email marketing logo"></a>
+
+Donations are very welcome, whether in beer 🍺, T-shirts 👕, or cold, hard cash 💰. Sponsorship through GitHub is a simple and convenient way to say "thank you" to PHPMailer's maintainers and contributors – just click the "Sponsor" button [on the project page](https://github.com/PHPMailer/PHPMailer). If your company uses PHPMailer, consider taking part in Tidelift's enterprise support programme.
+
+## PHPMailer For Enterprise
+
+Available as part of the Tidelift Subscription.
+
+The maintainers of PHPMailer and thousands of other packages are working with Tidelift to deliver commercial
+support and maintenance for the open-source packages you use to build your applications. Save time, reduce risk, and
+improve code health, while paying the maintainers of the exact packages you
+use. [Learn more.](https://tidelift.com/subscription/pkg/packagist-phpmailer-phpmailer?utm_source=packagist-phpmailer-phpmailer&utm_medium=referral&utm_campaign=enterprise&utm_term=repo)
+
+## Changelog
+See [changelog](changelog.md).
+
+## History
+- PHPMailer was originally written in 2001 by Brent R. Matzelle as a [SourceForge project](https://sourceforge.net/projects/phpmailer/).
+- [Marcus Bointon](https://github.com/Synchro) (`coolbru` on SF) and Andy Prevost (`codeworxtech`) took over the project in 2004.
+- Became an Apache incubator project on Google Code in 2010, managed by Jim Jagielski.
+- Marcus created [his fork on GitHub](https://github.com/Synchro/PHPMailer) in 2008.
+- Jim and Marcus decide to join forces and use GitHub as the canonical and official repo for PHPMailer in 2013.
+- PHPMailer moves to [the PHPMailer organisation](https://github.com/PHPMailer) on GitHub in 2013.
+
+### What's changed since moving from SourceForge?
+- Official successor to the SourceForge and Google Code projects.
+- Test suite.
+- Continuous integration with GitHub Actions.
+- Composer support.
+- Public development.
+- Additional languages and language strings.
+- CRAM-MD5 authentication support.
+- Preserves full repo history of authors, commits, and branches from the original SourceForge project.

libs/PHPMailer/SECURITY.md

@@ -0,0 +1,37 @@
+# Security notices relating to PHPMailer
+
+Please disclose any security issues or vulnerabilities found through [Tidelift's coordinated disclosure system](https://tidelift.com/security) or to the maintainers privately.
+
+PHPMailer 6.4.1 and earlier contain a vulnerability that can result in untrusted code being called (if such code is injected into the host project's scope by other means). If the `$patternselect` parameter to `validateAddress()` is set to `'php'` (the default, defined by `PHPMailer::$validator`), and the global namespace contains a function called `php`, it will be called in preference to the built-in validator of the same name. Mitigated in PHPMailer 6.5.0 by denying the use of simple strings as validator function names. Recorded as [CVE-2021-3603](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-3603). Reported by [Vikrant Singh Chauhan](mailto:vi@hackberry.xyz) via [huntr.dev](https://www.huntr.dev/).
+
+PHPMailer versions 6.4.1 and earlier contain a possible remote code execution vulnerability through the `$lang_path` parameter of the `setLanguage()` method. If the `$lang_path` parameter is passed unfiltered from user input, it can be set to [a UNC path](https://docs.microsoft.com/en-us/dotnet/standard/io/file-path-formats#unc-paths), and if an attacker is also able to persuade the server to load a file from that UNC path, a script file under their control may be executed. This vulnerability only applies to systems that resolve UNC paths, typically only Microsoft Windows.
+PHPMailer 6.5.0 mitigates this by no longer treating translation files as PHP code, but by parsing their text content directly. This approach avoids the possibility of executing unknown code while retaining backward compatibility. This isn't ideal, so the current translation format is deprecated and will be replaced in the next major release. Recorded as [CVE-2021-34551](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2021-34551). Reported by [Jilin Diting Information Technology Co., Ltd](https://listensec.com) via Tidelift.
+
+PHPMailer versions between 6.1.8 and 6.4.0 contain a regression of the earlier CVE-2018-19296 object injection vulnerability as a result of [a fix for Windows UNC paths in 6.1.8](https://github.com/PHPMailer/PHPMailer/commit/e2e07a355ee8ff36aba21d0242c5950c56e4c6f9). Recorded as [CVE-2020-36326](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2020-36326). Reported by Fariskhi Vidyan via Tidelift. 6.4.1 fixes this issue, and also enforces stricter checks for URL schemes in local path contexts.
+
+PHPMailer versions 6.1.5 and earlier contain an output escaping bug that occurs in `Content-Type` and `Content-Disposition` when filenames passed into `addAttachment` and other methods that accept attachment names contain double quote characters, in contravention of RFC822 3.4.1. No specific vulnerability has been found relating to this, but it could allow file attachments to bypass attachment filters that are based on matching filename extensions. Recorded as [CVE-2020-13625](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2020-13625). Reported by Elar Lang of Clarified Security.
+
+PHPMailer versions prior to 6.0.6 and 5.2.27 are vulnerable to an object injection attack by passing `phar://` paths into `addAttachment()` and other functions that may receive unfiltered local paths, possibly leading to RCE. Recorded as [CVE-2018-19296](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-19296). See [this article](https://knasmueller.net/5-answers-about-php-phar-exploitation) for more info on this type of vulnerability. Mitigated by blocking the use of paths containing URL-protocol style prefixes such as `phar://`. Reported by Sehun Oh of cyberone.kr.
+
+PHPMailer versions prior to 5.2.24 (released July 26th 2017) have an XSS vulnerability in one of the code examples, [CVE-2017-11503](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-11503). The `code_generator.phps` example did not filter user input prior to output. This file is distributed with a `.phps` extension, so it is not normally executable unless it is explicitly renamed, and the file is not included when PHPMailer is loaded through composer, so it is safe by default. There was also an undisclosed potential XSS vulnerability in the default exception handler (unused by default). Patches for both issues kindly provided by Patrick Monnerat of the Fedora Project.
+
+PHPMailer versions prior to 5.2.22 (released January 9th 2017) have a local file disclosure vulnerability, [CVE-2017-5223](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-5223). If content passed into `msgHTML()` is sourced from unfiltered user input, relative paths can map to absolute local file paths and added as attachments. Also note that `addAttachment` (just like `file_get_contents`, `passthru`, `unlink`, etc) should not be passed user-sourced params either! Reported by Yongxiang Li of Asiasecurity.
+
+PHPMailer versions prior to 5.2.20 (released December 28th 2016) are vulnerable to [CVE-2016-10045](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10045) a remote code execution vulnerability, responsibly reported by [Dawid Golunski](https://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10045-Vuln-Patch-Bypass.html), and patched by Paul Buonopane (@Zenexer).
+
+PHPMailer versions prior to 5.2.18 (released December 2016) are vulnerable to [CVE-2016-10033](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10033) a remote code execution vulnerability, responsibly reported by [Dawid Golunski](https://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10033-Vuln.html).
+
+PHPMailer versions prior to 5.2.14 (released November 2015) are vulnerable to [CVE-2015-8476](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-8476) an SMTP CRLF injection bug permitting arbitrary message sending.
+
+PHPMailer versions prior to 5.2.10 (released May 2015) are vulnerable to [CVE-2008-5619](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2008-5619), a remote code execution vulnerability in the bundled html2text library. This file was removed in 5.2.10, so if you are using a version prior to that and make use of the html2text function, it's vitally important that you upgrade and remove this file.
+
+PHPMailer versions prior to 2.0.7 and 2.2.1 are vulnerable to [CVE-2012-0796](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-0796), an email header injection attack.
+
+Joomla 1.6.0 uses PHPMailer in an unsafe way, allowing it to reveal local file paths, reported in [CVE-2011-3747](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-3747).
+
+PHPMailer didn't sanitise the `$lang_path` parameter in `SetLanguage`. This wasn't a problem in itself, but some apps (PHPClassifieds, ATutor) also failed to sanitise user-provided parameters passed to it, permitting semi-arbitrary local file inclusion, reported in [CVE-2010-4914](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-4914), [CVE-2007-2021](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2007-2021) and [CVE-2006-5734](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2006-5734).
+
+PHPMailer 1.7.2 and earlier contained a possible DDoS vulnerability reported in [CVE-2005-1807](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2005-1807).
+
+PHPMailer 1.7 and earlier (June 2003) have a possible vulnerability in the `SendmailSend` method where shell commands may not be sanitised. Reported in [CVE-2007-3215](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2007-3215).
+

libs/PHPMailer/SMTPUTF8.md

@@ -0,0 +1,48 @@
+# A short history of UTF-8 in email
+
+## Background
+
+For most of its existence, SMTP has been a 7-bit channel, only supporting US-ASCII characters. This has been a problem for many languages, especially those that use non-Latin scripts, and has led to the development of various workarounds.
+
+The first major improvement, introduced in 1994 in [RFC 1652](https://www.rfc-editor.org/rfc/rfc1652) and extended in 2011 in [RFC 6152](https://www.rfc-editor.org/rfc/rfc6152), was the addition of the `8BITMIME` SMTP extension, which allowed raw 8-bit data to be included in message bodies sent over SMTP.
+This allowed the message *contents* to contain 8-bit data, including things like UTF-8 text, even though the SMTP protocol itself was still firmly 7-bit. This worked by having the server switch to 8-bit after the headers, and then back to 7-bit after the completion of a `DATA` command.
+
+From 1996, messages could support [RFC 2047 encoding](https://www.rfc-editor.org/rfc/rfc2047), which permitted inserting characters from any character set into header *values* (but not names), but only by encoding them in somewhat unreadable ways to allow them to survive passage through a 7-bit channel. An example with a subject of "Schrödinger's cat" would be:
+
+```
+Subject: =?utf-8?Q=Schr=C3=B6dinger=92s_Cat?=
+```
+
+Here the accented `ö` is encoded as `=C3=B6`, which is the UTF-8 encoding of the 2-byte character, and the whole thing is wrapped in `=?utf-8?Q?` to indicate that it uses the UTF-8 charset and `quoted-printable` encoding. This is a bit of a hack, and not very human-friendly, but it works.
+
+Similarly, 8-bit message bodies could be encoded using the same `quoted-printable` and `base64` content transfer encoding (CTE) schemes, which preserved the 8-bit content while encoding it in a format that could survive transmission through a 7-bit channel.
+
+Domain names were originally also stuck in a 7-bit world, actually even more constrained to only a subset of the US-ASCII character set. But of course, many people want to have domains in their own language/script. Internationalized domain name (IDN) permitted this, using yet another complex encoding scheme called punycode, defined for domain names in 2003 in [RFC 3492](https://www.rfc-editor.org/rfc/rfc3492). This finally allowed the domain part (after the `@`) of email addresses to contain UTF-8, though it was actually an illusion preserved by email client applications. For example, an address of
+`user@café.example.com` translates to
+`user@xn--caf-dma.example.com` in punycode, rendering it mostly unreadable, but 7-bit friendly, and remaining compatible with email clients that don't know about IDN.
+
+The one remaining part of email that could not handle UTF-8 is the local part of email addresses (the part before the `@`).
+
+I've only mentioned UTF-8 here, but most of these approaches also allowed other character sets that were popular, such as [the ISO-8859 family](https://en.wikipedia.org/wiki/ISO/IEC_8859). However, UTF-8 solves so many problems that these other character sets are gradually falling out of favour, as UTF-8 can support all languages.
+
+This patchwork of overlapping approaches has served us well, but we have to admit that it's a mess.
+
+## SMTPUTF8
+
+`SMTPUTF8` is another SMTP extension, defined in [RFC 6531](https://www.rfc-editor.org/rfc/rfc6531) in 2012. This essentially solves the whole problem, allowing the entire SMTP conversation — commands, headers, and message bodies — to be sent in raw, unencoded UTF-8.
+
+But there's a problem with this approach: adoption. If you send a UTF-8 message to a recipient whose mail server doesn't support this format, the sender has to somehow downgrade the message to make it survive a transition to 7-bit. This is a hard problem to solve, especially since there is no way to make a 7-bit system support UTF-8 in the local parts of addresses. This downgrade problem is what held up the adoption of `SMTPUTF8` in PHPMailer for many years, but in that time the *de facto* approach has become to simply fail in that situation, and tell the recipient it's time they upgraded their mail server 😅.
+
+The vast majority of large email providers (gmail, Yahoo, Microsoft, etc), mail servers (postfix, exim, IIS, etc), and mail clients (Apple Mail, Outlook, Thunderbird, etc) now all support SMTPUTF8, so the need for backward compatibility is no longer what it was.
+
+## SMTPUTF8 in PHPMailer
+
+Several other PHP email libraries have implemented a halfway solution to `SMTPUTF8`, adding only the ability to support UTF-8 in email addresses, not elsewhere in the protocol. I wanted PHPMailer to do it "the right way", and this has taken much longer. PHPMailer now supports UTF-8 everywhere, and does not need to use transfer or header encodings for UTF-8 text when connecting to an `SMTPUTF8`-capable mail server.
+
+This support is handled automatically: if you add an email address that requires UTF-8, PHPMailer will use UTF-8 for everything. If not, it will fall back to 7-bit and encode the message as necessary.
+
+The one place you will need to be careful is in the selection of the address validator. By default, PHPMailer uses PHP's built-in `filter_var` validator, which does not allow UTF-8 email addresses. When PHPMailer spots that you have submitted a UTF-8 address, but have not altered the default validator, it will automatically switch to using a UTF-8-compatible validator. As soon as you do this, any SMTP connection you make will *require* that the server you connect to supports `SMTPUTF8`. You can select this validator explicitly by setting `PHPMailer::$validator = 'eai'` (an acronym for Email Address Internationalization).
+
+### Postfix gotcha
+
+Postfix has supported `SMTPUTF8` for a long time, but it has a peculiarity that it does not always advertise that it does so. However, rather surprisingly, if you use UTF-8 in the conversation, it will work anyway.

libs/PHPMailer/VERSION

@@ -0,0 +1 @@
+7.1.1

libs/PHPMailer/composer.json

@@ -0,0 +1,84 @@
+{
+    "name": "phpmailer/phpmailer",
+    "type": "library",
+    "description": "PHPMailer is a full-featured email creation and transfer class for PHP",
+    "authors": [
+        {
+            "name": "Marcus Bointon",
+            "email": "phpmailer@synchromedia.co.uk"
+        },
+        {
+            "name": "Jim Jagielski",
+            "email": "jimjag@gmail.com"
+        },
+        {
+            "name": "Andy Prevost",
+            "email": "codeworxtech@users.sourceforge.net"
+        },
+        {
+            "name": "Brent R. Matzelle"
+        }
+    ],
+    "funding": [
+        {
+            "url": "https://github.com/Synchro",
+            "type": "github"
+        }
+    ],
+    "config": {
+        "allow-plugins": {
+            "dealerdirect/phpcodesniffer-composer-installer": true
+        },
+        "lock": false
+    },
+    "require": {
+        "php": ">=5.5.0",
+        "ext-ctype": "*",
+        "ext-filter": "*",
+        "ext-hash": "*"
+    },
+    "require-dev": {
+        "dealerdirect/phpcodesniffer-composer-installer": "^1.0",
+        "doctrine/annotations": "^1.2.6 || ^1.13.3",
+        "php-parallel-lint/php-console-highlighter": "^1.0.0",
+        "php-parallel-lint/php-parallel-lint": "^1.3.2",
+        "phpcompatibility/php-compatibility": "^10.0.0@dev",
+        "squizlabs/php_codesniffer": "^3.13.5",
+        "yoast/phpunit-polyfills": "^1.0.4"
+    },
+    "suggest": {
+        "decomplexity/SendOauth2": "Adapter for using XOAUTH2 authentication",
+        "ext-imap": "Needed to support advanced email address parsing according to RFC822",
+        "ext-mbstring": "Needed to send email in multibyte encoding charset or decode encoded addresses",
+        "ext-openssl": "Needed for secure SMTP sending and DKIM signing",
+        "greew/oauth2-azure-provider": "Needed for Microsoft Azure XOAUTH2 authentication",
+        "hayageek/oauth2-yahoo": "Needed for Yahoo XOAUTH2 authentication",
+        "league/oauth2-google": "Needed for Google XOAUTH2 authentication",
+        "psr/log": "For optional PSR-3 debug logging",
+        "symfony/polyfill-mbstring": "To support UTF-8 if the Mbstring PHP extension is not enabled (^1.2)",
+        "thenetworg/oauth2-azure": "Needed for Microsoft XOAUTH2 authentication",
+        "directorytree/imapengine": "For uploading sent messages via IMAP, see gmail example"
+    },
+    "minimum-stability": "dev",
+    "prefer-stable": true,
+    "autoload": {
+        "psr-4": {
+            "PHPMailer\\PHPMailer\\": "src/"
+        }
+    },
+    "autoload-dev": {
+        "psr-4": {
+            "PHPMailer\\Test\\": "test/"
+        }
+    },
+    "license": "LGPL-2.1-only",
+    "scripts": {
+        "check": "./vendor/bin/phpcs",
+        "style": "./vendor/bin/phpcbf",
+        "test": "./vendor/bin/phpunit --no-coverage",
+        "coverage": "./vendor/bin/phpunit",
+        "lint": [
+            "@php ./vendor/php-parallel-lint/php-parallel-lint/parallel-lint . --show-deprecated -e php,phps --exclude vendor --exclude .git --exclude build"
+        ]
+    }
+}

libs/PHPMailer/get_oauth_token.php

@@ -0,0 +1,182 @@
+<?php
+
+/**
+ * PHPMailer - PHP email creation and transport class.
+ * PHP Version 5.5
+ * @package PHPMailer
+ * @see https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ * @author Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2020 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/**
+ * Get an OAuth2 token from an OAuth2 provider.
+ * * Install this script on your server so that it's accessible
+ * as [https/http]://<yourdomain>/<folder>/get_oauth_token.php
+ * e.g.: http://localhost/phpmailer/get_oauth_token.php
+ * * Ensure dependencies are installed with 'composer install'
+ * * Set up an app in your Google/Yahoo/Microsoft account
+ * * Set the script address as the app's redirect URL
+ * If no refresh token is obtained when running this file,
+ * revoke access to your app and run the script again.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+/**
+ * Aliases for League Provider Classes
+ * Make sure you have added these to your composer.json and run `composer install`
+ * Plenty to choose from here:
+ * @see https://oauth2-client.thephpleague.com/providers/thirdparty/
+ */
+//@see https://github.com/thephpleague/oauth2-google
+use League\OAuth2\Client\Provider\Google;
+//@see https://packagist.org/packages/hayageek/oauth2-yahoo
+use Hayageek\OAuth2\Client\Provider\Yahoo;
+//@see https://github.com/stevenmaguire/oauth2-microsoft
+use Stevenmaguire\OAuth2\Client\Provider\Microsoft;
+//@see https://github.com/greew/oauth2-azure-provider
+use Greew\OAuth2\Client\Provider\Azure;
+
+if (!isset($_GET['code']) && !isset($_POST['provider'])) {
+    ?>
+<html>
+<body>
+<form method="post">
+    <h1>Select Provider</h1>
+    <input type="radio" name="provider" value="Google" id="providerGoogle">
+    <label for="providerGoogle">Google</label><br>
+    <input type="radio" name="provider" value="Yahoo" id="providerYahoo">
+    <label for="providerYahoo">Yahoo</label><br>
+    <input type="radio" name="provider" value="Microsoft" id="providerMicrosoft">
+    <label for="providerMicrosoft">Microsoft</label><br>
+    <input type="radio" name="provider" value="Azure" id="providerAzure">
+    <label for="providerAzure">Azure</label><br>
+    <h1>Enter id and secret</h1>
+    <p>These details are obtained by setting up an app in your provider's developer console.
+    </p>
+    <p>ClientId: <input type="text" name="clientId"><p>
+    <p>ClientSecret: <input type="text" name="clientSecret"></p>
+    <p>TenantID (only relevant for Azure): <input type="text" name="tenantId"></p>
+    <input type="submit" value="Continue">
+</form>
+</body>
+</html>
+    <?php
+    exit;
+}
+
+require 'vendor/autoload.php';
+
+session_start();
+
+$providerName = '';
+$clientId = '';
+$clientSecret = '';
+$tenantId = '';
+
+if (array_key_exists('provider', $_POST)) {
+    $providerName = $_POST['provider'];
+    $clientId = $_POST['clientId'];
+    $clientSecret = $_POST['clientSecret'];
+    $tenantId = $_POST['tenantId'];
+    $_SESSION['provider'] = $providerName;
+    $_SESSION['clientId'] = $clientId;
+    $_SESSION['clientSecret'] = $clientSecret;
+    $_SESSION['tenantId'] = $tenantId;
+} elseif (array_key_exists('provider', $_SESSION)) {
+    $providerName = $_SESSION['provider'];
+    $clientId = $_SESSION['clientId'];
+    $clientSecret = $_SESSION['clientSecret'];
+    $tenantId = $_SESSION['tenantId'];
+}
+
+//If you don't want to use the built-in form, set your client id and secret here
+//$clientId = 'RANDOMCHARS-----duv1n2.apps.googleusercontent.com';
+//$clientSecret = 'RANDOMCHARS-----lGyjPcRtvP';
+
+//If this automatic URL doesn't work, set it yourself manually to the URL of this script
+$redirectUri = (isset($_SERVER['HTTPS']) ? 'https://' : 'http://') . $_SERVER['HTTP_HOST'] . $_SERVER['PHP_SELF'];
+//$redirectUri = 'http://localhost/PHPMailer/redirect';
+
+$params = [
+    'clientId' => $clientId,
+    'clientSecret' => $clientSecret,
+    'redirectUri' => $redirectUri,
+    'accessType' => 'offline'
+];
+
+$options = [];
+$provider = null;
+
+switch ($providerName) {
+    case 'Google':
+        $provider = new Google($params);
+        $options = [
+            'scope' => [
+                'https://mail.google.com/'
+            ]
+        ];
+        break;
+    case 'Yahoo':
+        $provider = new Yahoo($params);
+        break;
+    case 'Microsoft':
+        $provider = new Microsoft($params);
+        $options = [
+            'scope' => [
+                'wl.imap',
+                'wl.offline_access'
+            ]
+        ];
+        break;
+    case 'Azure':
+        $params['tenantId'] = $tenantId;
+
+        $provider = new Azure($params);
+        $options = [
+            'scope' => [
+                'https://outlook.office.com/SMTP.Send',
+                'offline_access'
+            ]
+        ];
+        break;
+}
+
+if (null === $provider) {
+    exit('Provider missing');
+}
+
+if (!isset($_GET['code'])) {
+    //If we don't have an authorization code then get one
+    $authUrl = $provider->getAuthorizationUrl($options);
+    $_SESSION['oauth2state'] = $provider->getState();
+    header('Location: ' . $authUrl);
+    exit;
+    //Check given state against previously stored one to mitigate CSRF attack
+} elseif (empty($_GET['state']) || ($_GET['state'] !== $_SESSION['oauth2state'])) {
+    unset($_SESSION['oauth2state']);
+    unset($_SESSION['provider']);
+    exit('Invalid state');
+} else {
+    unset($_SESSION['provider']);
+    //Try to get an access token (using the authorization code grant)
+    $token = $provider->getAccessToken(
+        'authorization_code',
+        [
+            'code' => $_GET['code']
+        ]
+    );
+    //Use this to interact with an API on the users behalf
+    //Use this to get a new access token if the old one expires
+    echo 'Refresh Token: ', htmlspecialchars($token->getRefreshToken(), ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401);
+}

libs/PHPMailer/language/phpmailer.lang-af.php

@@ -0,0 +1,26 @@
+<?php
+
+/**
+ * Afrikaans PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP-fout: kon nie geverifieer word nie.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP-fout: kon nie aan SMTP-verbind nie.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP-fout: data nie aanvaar nie.';
+$PHPMAILER_LANG['empty_message']        = 'Boodskapliggaam leeg.';
+$PHPMAILER_LANG['encoding']             = 'Onbekende kodering: ';
+$PHPMAILER_LANG['execute']              = 'Kon nie uitvoer nie: ';
+$PHPMAILER_LANG['file_access']          = 'Kon nie lêer oopmaak nie: ';
+$PHPMAILER_LANG['file_open']            = 'Lêerfout: Kon nie lêer oopmaak nie: ';
+$PHPMAILER_LANG['from_failed']          = 'Die volgende Van adres misluk: ';
+$PHPMAILER_LANG['instantiate']          = 'Kon nie posfunksie instansieer nie.';
+$PHPMAILER_LANG['invalid_address']      = 'Ongeldige adres: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer word nie ondersteun nie.';
+$PHPMAILER_LANG['provide_address']      = 'U moet ten minste een ontvanger e-pos adres verskaf.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP-fout: Die volgende ontvangers het misluk: ';
+$PHPMAILER_LANG['signing']              = 'Ondertekening Fout: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP-verbinding () misluk.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP-bediener fout: ';
+$PHPMAILER_LANG['variable_set']         = 'Kan nie veranderlike instel of herstel nie: ';
+$PHPMAILER_LANG['extension_missing']    = 'Uitbreiding ontbreek: ';

libs/PHPMailer/language/phpmailer.lang-ar.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Arabic PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author bahjat al mostafa <bahjat983@hotmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'خطأ SMTP : لا يمكن تأكيد الهوية.';
+$PHPMAILER_LANG['connect_host']         = 'خطأ SMTP: لا يمكن الاتصال بالخادم SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'خطأ SMTP: لم يتم قبول المعلومات .';
+$PHPMAILER_LANG['empty_message']        = 'نص الرسالة فارغ';
+$PHPMAILER_LANG['encoding']             = 'ترميز غير معروف: ';
+$PHPMAILER_LANG['execute']              = 'لا يمكن تنفيذ : ';
+$PHPMAILER_LANG['file_access']          = 'لا يمكن الوصول للملف: ';
+$PHPMAILER_LANG['file_open']            = 'خطأ في الملف: لا يمكن فتحه: ';
+$PHPMAILER_LANG['from_failed']          = 'خطأ على مستوى عنوان المرسل : ';
+$PHPMAILER_LANG['instantiate']          = 'لا يمكن توفير خدمة البريد.';
+$PHPMAILER_LANG['invalid_address']      = 'الإرسال غير ممكن لأن عنوان البريد الإلكتروني غير صالح: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' برنامج الإرسال غير مدعوم.';
+$PHPMAILER_LANG['provide_address']      = 'يجب توفير عنوان البريد الإلكتروني لمستلم واحد على الأقل.';
+$PHPMAILER_LANG['recipients_failed']    = 'خطأ SMTP: الأخطاء التالية فشل في الارسال لكل من : ';
+$PHPMAILER_LANG['signing']              = 'خطأ في التوقيع: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() غير ممكن.';
+$PHPMAILER_LANG['smtp_error']           = 'خطأ على مستوى الخادم SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'لا يمكن تعيين أو إعادة تعيين متغير: ';
+$PHPMAILER_LANG['extension_missing']    = 'الإضافة غير موجودة: ';

libs/PHPMailer/language/phpmailer.lang-as.php

@@ -0,0 +1,35 @@
+<?php
+
+/**
+ * Assamese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Manish Sarkar <manish.n.manish@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP ত্ৰুটি: প্ৰমাণীকৰণ কৰিব নোৱাৰি';
+$PHPMAILER_LANG['buggy_php']            = 'আপোনাৰ PHP সংস্কৰণ এটা বাগৰ দ্বাৰা প্ৰভাৱিত হয় যাৰ ফলত নষ্ট বাৰ্তা হব পাৰে । ইয়াক সমাধান কৰিবলে, প্ৰেৰণ কৰিবলে SMTP ব্যৱহাৰ কৰক, আপোনাৰ php.ini ত mail.add_x_header বিকল্প নিষ্ক্ৰিয় কৰক, MacOS বা Linux লৈ সলনি কৰক, বা আপোনাৰ PHP সংস্কৰণ 7.0.17+ বা 7.1.3+ লৈ সলনি কৰক ।';
+$PHPMAILER_LANG['connect_host']         = 'SMTP ত্ৰুটি: SMTP চাৰ্ভাৰৰ সৈতে সংযোগ কৰিবলে অক্ষম';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP ত্ৰুটি: তথ্য গ্ৰহণ কৰা হোৱা নাই';
+$PHPMAILER_LANG['empty_message']        = 'বাৰ্তাৰ মূখ্য অংশ খালী।';
+$PHPMAILER_LANG['encoding']             = 'অজ্ঞাত এনকোডিং: ';
+$PHPMAILER_LANG['execute']              = 'এক্সিকিউট কৰিব নোৱাৰি: ';
+$PHPMAILER_LANG['extension_missing']    = 'সম্প্ৰসাৰণ নোহোৱা হৈছে: ';
+$PHPMAILER_LANG['file_access']          = 'ফাইল অভিগম কৰিবলে অক্ষম: ';
+$PHPMAILER_LANG['file_open']            = 'ফাইল ত্ৰুটি: ফাইল খোলিবলৈ অক্ষম: ';
+$PHPMAILER_LANG['from_failed']          = 'নিম্নলিখিত প্ৰেৰকৰ ঠিকনা(সমূহ) ব্যৰ্থ: ';
+$PHPMAILER_LANG['instantiate']          = 'মেইল ফাংচনৰ এটা উদাহৰণ সৃষ্টি কৰিবলে অক্ষম';
+$PHPMAILER_LANG['invalid_address']      = 'প্ৰেৰণ কৰিব নোৱাৰি: অবৈধ ইমেইল ঠিকনা: ';
+$PHPMAILER_LANG['invalid_header']       = 'অবৈধ হেডাৰৰ নাম বা মান';
+$PHPMAILER_LANG['invalid_hostentry']    = 'অবৈধ হোষ্টেন্ট্ৰি: ';
+$PHPMAILER_LANG['invalid_host']         = 'অবৈধ হস্ট:';
+$PHPMAILER_LANG['mailer_not_supported'] = 'মেইলাৰ সমৰ্থিত নহয়।';
+$PHPMAILER_LANG['provide_address']      = 'আপুনি অন্ততঃ এটা গন্তব্য ইমেইল ঠিকনা দিব লাগিব';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP ত্ৰুটি: নিম্নলিখিত গন্তব্যস্থানসমূহ ব্যৰ্থ: ';
+$PHPMAILER_LANG['signing']              = 'স্বাক্ষৰ কৰাত ব্যৰ্থ: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP কড: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'অতিৰিক্ত SMTP তথ্য: ';
+$PHPMAILER_LANG['smtp_detail']          = 'বিৱৰণ:';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP সংযোগ() ব্যৰ্থ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP চাৰ্ভাৰৰ ত্ৰুটি: ';
+$PHPMAILER_LANG['variable_set']         = 'চলক নিৰ্ধাৰণ কৰিব পৰা নগল: ';
+$PHPMAILER_LANG['extension_missing']    = 'অনুপস্থিত সম্প্ৰসাৰণ: ';

libs/PHPMailer/language/phpmailer.lang-az.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Azerbaijani PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author @mirjalal
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP xətası: Giriş uğursuz oldu.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP xətası: SMTP serverinə qoşulma uğursuz oldu.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP xətası: Verilənlər qəbul edilməyib.';
+$PHPMAILER_LANG['empty_message']        = 'Boş mesaj göndərilə bilməz.';
+$PHPMAILER_LANG['encoding']             = 'Qeyri-müəyyən kodlaşdırma: ';
+$PHPMAILER_LANG['execute']              = 'Əmr yerinə yetirilmədi: ';
+$PHPMAILER_LANG['file_access']          = 'Fayla giriş yoxdur: ';
+$PHPMAILER_LANG['file_open']            = 'Fayl xətası: Fayl açıla bilmədi: ';
+$PHPMAILER_LANG['from_failed']          = 'Göstərilən poçtlara göndərmə uğursuz oldu: ';
+$PHPMAILER_LANG['instantiate']          = 'Mail funksiyası işə salına bilmədi.';
+$PHPMAILER_LANG['invalid_address']      = 'Düzgün olmayan e-mail adresi: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' - e-mail kitabxanası dəstəklənmir.';
+$PHPMAILER_LANG['provide_address']      = 'Ən azı bir e-mail adresi daxil edilməlidir.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP xətası: Aşağıdakı ünvanlar üzrə alıcılara göndərmə uğursuzdur: ';
+$PHPMAILER_LANG['signing']              = 'İmzalama xətası: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP serverinə qoşulma uğursuz oldu.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP serveri xətası: ';
+$PHPMAILER_LANG['variable_set']         = 'Dəyişənin quraşdırılması uğursuz oldu: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-ba.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Bosnian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ermin Islamagić <ermin@islamagic.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Greška: Neuspjela prijava.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Greška: Nije moguće spojiti se sa SMTP serverom.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Greška: Podatci nisu prihvaćeni.';
+$PHPMAILER_LANG['empty_message']        = 'Sadržaj poruke je prazan.';
+$PHPMAILER_LANG['encoding']             = 'Nepoznata kriptografija: ';
+$PHPMAILER_LANG['execute']              = 'Nije moguće izvršiti naredbu: ';
+$PHPMAILER_LANG['file_access']          = 'Nije moguće pristupiti datoteci: ';
+$PHPMAILER_LANG['file_open']            = 'Nije moguće otvoriti datoteku: ';
+$PHPMAILER_LANG['from_failed']          = 'SMTP Greška: Slanje sa navedenih e-mail adresa nije uspjelo: ';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Greška: Slanje na navedene e-mail adrese nije uspjelo: ';
+$PHPMAILER_LANG['instantiate']          = 'Ne mogu pokrenuti mail funkcionalnost.';
+$PHPMAILER_LANG['invalid_address']      = 'E-mail nije poslan. Neispravna e-mail adresa: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nije podržan.';
+$PHPMAILER_LANG['provide_address']      = 'Definišite barem jednu adresu primaoca.';
+$PHPMAILER_LANG['signing']              = 'Greška prilikom prijave: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Spajanje na SMTP server nije uspjelo.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP greška: ';
+$PHPMAILER_LANG['variable_set']         = 'Nije moguće postaviti varijablu ili je vratiti nazad: ';
+$PHPMAILER_LANG['extension_missing']    = 'Nedostaje ekstenzija: ';

libs/PHPMailer/language/phpmailer.lang-be.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Belarusian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Aleksander Maksymiuk <info@setpro.pl>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Памылка SMTP: памылка ідэнтыфікацыі.';
+$PHPMAILER_LANG['connect_host']         = 'Памылка SMTP: нельга ўстанавіць сувязь з SMTP-серверам.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Памылка SMTP: звесткі непрынятыя.';
+$PHPMAILER_LANG['empty_message']        = 'Пустое паведамленне.';
+$PHPMAILER_LANG['encoding']             = 'Невядомая кадыроўка тэксту: ';
+$PHPMAILER_LANG['execute']              = 'Нельга выканаць каманду: ';
+$PHPMAILER_LANG['file_access']          = 'Няма доступу да файла: ';
+$PHPMAILER_LANG['file_open']            = 'Нельга адкрыць файл: ';
+$PHPMAILER_LANG['from_failed']          = 'Няправільны адрас адпраўніка: ';
+$PHPMAILER_LANG['instantiate']          = 'Нельга прымяніць функцыю mail().';
+$PHPMAILER_LANG['invalid_address']      = 'Нельга даслаць паведамленне, няправільны email атрымальніка: ';
+$PHPMAILER_LANG['provide_address']      = 'Запоўніце, калі ласка, правільны email атрымальніка.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' - паштовы сервер не падтрымліваецца.';
+$PHPMAILER_LANG['recipients_failed']    = 'Памылка SMTP: няправільныя атрымальнікі: ';
+$PHPMAILER_LANG['signing']              = 'Памылка подпісу паведамлення: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Памылка сувязі з SMTP-серверам.';
+$PHPMAILER_LANG['smtp_error']           = 'Памылка SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Нельга ўстанавіць або перамяніць значэнне пераменнай: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-bg.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Bulgarian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Mikhail Kyosev <mialygk@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP грешка: Не може да се удостовери пред сървъра.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP грешка: Не може да се свърже с SMTP хоста.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP грешка: данните не са приети.';
+$PHPMAILER_LANG['empty_message']        = 'Съдържанието на съобщението е празно';
+$PHPMAILER_LANG['encoding']             = 'Неизвестно кодиране: ';
+$PHPMAILER_LANG['execute']              = 'Не може да се изпълни: ';
+$PHPMAILER_LANG['file_access']          = 'Няма достъп до файл: ';
+$PHPMAILER_LANG['file_open']            = 'Файлова грешка: Не може да се отвори файл: ';
+$PHPMAILER_LANG['from_failed']          = 'Следните адреси за подател са невалидни: ';
+$PHPMAILER_LANG['instantiate']          = 'Не може да се инстанцира функцията mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Невалиден адрес: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' - пощенски сървър не се поддържа.';
+$PHPMAILER_LANG['provide_address']      = 'Трябва да предоставите поне един email адрес за получател.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP грешка: Следните адреси за Получател са невалидни: ';
+$PHPMAILER_LANG['signing']              = 'Грешка при подписване: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP провален connect().';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP сървърна грешка: ';
+$PHPMAILER_LANG['variable_set']         = 'Не може да се установи или възстанови променлива: ';
+$PHPMAILER_LANG['extension_missing']    = 'Липсва разширение: ';

libs/PHPMailer/language/phpmailer.lang-bn.php

@@ -0,0 +1,35 @@
+<?php
+
+/**
+ * Bengali PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Manish Sarkar <manish.n.manish@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP ত্রুটি: প্রমাণীকরণ করতে অক্ষম৷';
+$PHPMAILER_LANG['buggy_php']            = 'আপনার PHP সংস্করণ একটি বাগ দ্বারা প্রভাবিত হয় যার ফলে দূষিত বার্তা হতে পারে। এটি ঠিক করতে, পাঠাতে SMTP ব্যবহার করুন, আপনার php.ini এ mail.add_x_header বিকল্পটি নিষ্ক্রিয় করুন, MacOS বা Linux-এ স্যুইচ করুন, অথবা আপনার PHP সংস্করণকে 7.0.17+ বা 7.1.3+ এ পরিবর্তন করুন।';
+$PHPMAILER_LANG['connect_host']         = 'SMTP ত্রুটি: SMTP সার্ভারের সাথে সংযোগ করতে অক্ষম৷';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP ত্রুটি: ডেটা গ্রহণ করা হয়নি৷';
+$PHPMAILER_LANG['empty_message']        = 'বার্তার অংশটি খালি।';
+$PHPMAILER_LANG['encoding']             = 'অজানা এনকোডিং: ';
+$PHPMAILER_LANG['execute']              = 'নির্বাহ করতে অক্ষম: ';
+$PHPMAILER_LANG['extension_missing']    = 'এক্সটেনশন অনুপস্থিত:';
+$PHPMAILER_LANG['file_access']          = 'ফাইল অ্যাক্সেস করতে অক্ষম: ';
+$PHPMAILER_LANG['file_open']            = 'ফাইল ত্রুটি: ফাইল খুলতে অক্ষম: ';
+$PHPMAILER_LANG['from_failed']          = 'নিম্নলিখিত প্রেরকের ঠিকানা(গুলি) ব্যর্থ হয়েছে: ';
+$PHPMAILER_LANG['instantiate']          = 'মেল ফাংশনের একটি উদাহরণ তৈরি করতে অক্ষম৷';
+$PHPMAILER_LANG['invalid_address']      = 'পাঠাতে অক্ষম: অবৈধ ইমেল ঠিকানা: ';
+$PHPMAILER_LANG['invalid_header']       = 'অবৈধ হেডার নাম বা মান';
+$PHPMAILER_LANG['invalid_hostentry']    = 'অবৈধ হোস্টেন্ট্রি: ';
+$PHPMAILER_LANG['invalid_host']         = 'অবৈধ হোস্ট:';
+$PHPMAILER_LANG['mailer_not_supported'] = 'মেইলার সমর্থিত নয়।';
+$PHPMAILER_LANG['provide_address']      = 'আপনাকে অবশ্যই অন্তত একটি গন্তব্য ইমেল ঠিকানা প্রদান করতে হবে৷';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP ত্রুটি: নিম্নলিখিত গন্তব্যগুলি ব্যর্থ হয়েছে: ';
+$PHPMAILER_LANG['signing']              = 'স্বাক্ষর করতে ব্যর্থ হয়েছে: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP কোড: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'অতিরিক্ত SMTP তথ্য:';
+$PHPMAILER_LANG['smtp_detail']          = 'বর্ণনা: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP সংযোগ() ব্যর্থ হয়েছে৷';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP সার্ভার ত্রুটি: ';
+$PHPMAILER_LANG['variable_set']         = 'পরিবর্তনশীল সেট করা যায়নি: ';
+$PHPMAILER_LANG['extension_missing']    = 'অনুপস্থিত এক্সটেনশন: ';

libs/PHPMailer/language/phpmailer.lang-ca.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Catalan PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ivan <web AT microstudi DOT com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Error SMTP: No s’ha pogut autenticar.';
+$PHPMAILER_LANG['connect_host']         = 'Error SMTP: No es pot connectar al servidor SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Error SMTP: Dades no acceptades.';
+$PHPMAILER_LANG['empty_message']        = 'El cos del missatge està buit.';
+$PHPMAILER_LANG['encoding']             = 'Codificació desconeguda: ';
+$PHPMAILER_LANG['execute']              = 'No es pot executar: ';
+$PHPMAILER_LANG['file_access']          = 'No es pot accedir a l’arxiu: ';
+$PHPMAILER_LANG['file_open']            = 'Error d’Arxiu: No es pot obrir l’arxiu: ';
+$PHPMAILER_LANG['from_failed']          = 'La(s) següent(s) adreces de remitent han fallat: ';
+$PHPMAILER_LANG['instantiate']          = 'No s’ha pogut crear una instància de la funció Mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Adreça d’email invalida: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer no està suportat';
+$PHPMAILER_LANG['provide_address']      = 'S’ha de proveir almenys una adreça d’email com a destinatari.';
+$PHPMAILER_LANG['recipients_failed']    = 'Error SMTP: Els següents destinataris han fallat: ';
+$PHPMAILER_LANG['signing']              = 'Error al signar: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Ha fallat el SMTP Connect().';
+$PHPMAILER_LANG['smtp_error']           = 'Error del servidor SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'No s’ha pogut establir o restablir la variable: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-cs.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Czech PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Chyba SMTP: Autentizace selhala.';
+$PHPMAILER_LANG['connect_host']         = 'Chyba SMTP: Nelze navázat spojení se SMTP serverem.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Chyba SMTP: Data nebyla přijata.';
+$PHPMAILER_LANG['empty_message']        = 'Prázdné tělo zprávy';
+$PHPMAILER_LANG['encoding']             = 'Neznámé kódování: ';
+$PHPMAILER_LANG['execute']              = 'Nelze provést: ';
+$PHPMAILER_LANG['file_access']          = 'Nelze získat přístup k souboru: ';
+$PHPMAILER_LANG['file_open']            = 'Chyba souboru: Nelze otevřít soubor pro čtení: ';
+$PHPMAILER_LANG['from_failed']          = 'Následující adresa odesílatele je nesprávná: ';
+$PHPMAILER_LANG['instantiate']          = 'Nelze vytvořit instanci emailové funkce.';
+$PHPMAILER_LANG['invalid_address']      = 'Neplatná adresa: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Záznam hostitele je nesprávný: ';
+$PHPMAILER_LANG['invalid_host']         = 'Hostitel je nesprávný: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer není podporován.';
+$PHPMAILER_LANG['provide_address']      = 'Musíte zadat alespoň jednu emailovou adresu příjemce.';
+$PHPMAILER_LANG['recipients_failed']    = 'Chyba SMTP: Následující adresy příjemců nejsou správně: ';
+$PHPMAILER_LANG['signing']              = 'Chyba přihlašování: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() selhal.';
+$PHPMAILER_LANG['smtp_error']           = 'Chyba SMTP serveru: ';
+$PHPMAILER_LANG['variable_set']         = 'Nelze nastavit nebo změnit proměnnou: ';
+$PHPMAILER_LANG['extension_missing']    = 'Chybí rozšíření: ';

libs/PHPMailer/language/phpmailer.lang-da.php

@@ -0,0 +1,39 @@
+<?php
+
+/**
+ * Danish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author John Sebastian <jms@iwb.dk>
+ * Rewrite and extension of the work by Mikael Stokkebro <info@stokkebro.dk>
+ *
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP fejl: Login mislykkedes.';
+$PHPMAILER_LANG['buggy_php']            = 'Din version af PHP er berørt af en fejl, som gør at dine beskeder muligvis vises forkert. For at rette dette kan du skifte til SMTP, slå mail.add_x_header headeren i din php.ini fil fra, skifte til MacOS eller Linux eller opgradere din version af PHP til 7.0.17+ eller 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP fejl: Forbindelse til SMTP serveren kunne ikke oprettes.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP fejl: Data blev ikke accepteret.';
+$PHPMAILER_LANG['empty_message']        = 'Meddelelsen er uden indhold';
+$PHPMAILER_LANG['encoding']             = 'Ukendt encode-format: ';
+$PHPMAILER_LANG['execute']              = 'Kunne ikke afvikle: ';
+$PHPMAILER_LANG['extension_missing']    = 'Udvidelse mangler: ';
+$PHPMAILER_LANG['file_access']          = 'Kunne ikke tilgå filen: ';
+$PHPMAILER_LANG['file_open']            = 'Fil fejl: Kunne ikke åbne filen: ';
+$PHPMAILER_LANG['from_failed']          = 'Følgende afsenderadresse er forkert: ';
+$PHPMAILER_LANG['instantiate']          = 'Email funktionen kunne ikke initialiseres.';
+$PHPMAILER_LANG['invalid_address']      = 'Udgyldig adresse: ';
+$PHPMAILER_LANG['invalid_header']       = 'Ugyldig header navn eller værdi';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Ugyldig hostentry: ';
+$PHPMAILER_LANG['invalid_host']         = 'Ugyldig vært: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer understøttes ikke.';
+$PHPMAILER_LANG['provide_address']      = 'Indtast mindst en modtagers email adresse.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP fejl: Følgende modtagere fejlede: ';
+$PHPMAILER_LANG['signing']              = 'Signeringsfejl: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP kode: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Yderligere SMTP info: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() fejlede.';
+$PHPMAILER_LANG['smtp_detail']          = 'Detalje: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP server fejl: ';
+$PHPMAILER_LANG['variable_set']         = 'Kunne ikke definere eller nulstille variablen: ';
+$PHPMAILER_LANG['no_smtputf8']          = 'Serveren understøtter ikke SMTPUTF8 som påkrævet for at sende til Unicode adresser';
+$PHPMAILER_LANG['imap_recommended']     = 'Brug af forenklet adresseparser anbefales ikke. Installer PHP IMAP udvidelsen for fuld RFC822 parsing.';
+$PHPMAILER_LANG['deprecated_argument']  = 'Udfaset argument: ';

libs/PHPMailer/language/phpmailer.lang-de.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * German PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP-Fehler: Authentifizierung fehlgeschlagen.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP-Fehler: Konnte keine Verbindung zum SMTP-Host herstellen.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP-Fehler: Daten werden nicht akzeptiert.';
+$PHPMAILER_LANG['empty_message']        = 'E-Mail-Inhalt ist leer.';
+$PHPMAILER_LANG['encoding']             = 'Unbekannte Kodierung: ';
+$PHPMAILER_LANG['execute']              = 'Konnte folgenden Befehl nicht ausführen: ';
+$PHPMAILER_LANG['file_access']          = 'Zugriff auf folgende Datei fehlgeschlagen: ';
+$PHPMAILER_LANG['file_open']            = 'Dateifehler: Konnte folgende Datei nicht öffnen: ';
+$PHPMAILER_LANG['from_failed']          = 'Die folgende Absenderadresse ist nicht korrekt: ';
+$PHPMAILER_LANG['instantiate']          = 'Mail-Funktion konnte nicht initialisiert werden.';
+$PHPMAILER_LANG['invalid_address']      = 'Die Adresse ist ungültig: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Ungültiger Hosteintrag: ';
+$PHPMAILER_LANG['invalid_host']         = 'Ungültiger Host: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer wird nicht unterstützt.';
+$PHPMAILER_LANG['provide_address']      = 'Bitte geben Sie mindestens eine Empfängeradresse an.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP-Fehler: Die folgenden Empfänger sind nicht korrekt: ';
+$PHPMAILER_LANG['signing']              = 'Fehler beim Signieren: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Verbindung zum SMTP-Server fehlgeschlagen.';
+$PHPMAILER_LANG['smtp_error']           = 'Fehler vom SMTP-Server: ';
+$PHPMAILER_LANG['variable_set']         = 'Kann Variable nicht setzen oder zurücksetzen: ';
+$PHPMAILER_LANG['extension_missing']    = 'Fehlende Erweiterung: ';

libs/PHPMailer/language/phpmailer.lang-el.php

@@ -0,0 +1,33 @@
+<?php
+
+/**
+ * Greek PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Σφάλμα SMTP: Αδυναμία πιστοποίησης.';
+$PHPMAILER_LANG['buggy_php']            = 'Η έκδοση PHP που χρησιμοποιείτε παρουσιάζει σφάλμα που μπορεί να έχει ως αποτέλεσμα κατεστραμένα μηνύματα. Για να το διορθώσετε, αλλάξτε τον τρόπο αποστολής σε SMTP, απενεργοποιήστε την επιλογή mail.add_x_header στο αρχείο php.ini, αλλάξτε λειτουργικό σε MacOS ή Linux ή αναβαθμίστε την PHP σε έκδοση 7.0.17+ ή 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Σφάλμα SMTP: Αδυναμία σύνδεσης με τον φιλοξενητή SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Σφάλμα SMTP: Μη αποδεκτά δεδομένα.';
+$PHPMAILER_LANG['empty_message']        = 'Η ηλεκτρονική επιστολή δεν έχει περιεχόμενο.';
+$PHPMAILER_LANG['encoding']             = 'Άγνωστη μορφή κωδικοποίησης: ';
+$PHPMAILER_LANG['execute']              = 'Αδυναμία εκτέλεσης: ';
+$PHPMAILER_LANG['extension_missing']    = 'Απουσία επέκτασης: ';
+$PHPMAILER_LANG['file_access']          = 'Αδυναμία πρόσβασης στο αρχείο: ';
+$PHPMAILER_LANG['file_open']            = 'Σφάλμα Αρχείου: Αδυναμία ανοίγματος αρχείου: ';
+$PHPMAILER_LANG['from_failed']          = 'Η ακόλουθη διεύθυνση αποστολέα δεν είναι σωστή: ';
+$PHPMAILER_LANG['instantiate']          = 'Αδυναμία εκκίνησης συνάρτησης Mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Μη έγκυρη διεύθυνση: ';
+$PHPMAILER_LANG['invalid_header']       = 'Μη έγκυρο όνομα κεφαλίδας ή τιμή';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Μη έγκυρη εισαγωγή φιλοξενητή: ';
+$PHPMAILER_LANG['invalid_host']         = 'Μη έγκυρος φιλοξενητής: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer δεν υποστηρίζεται.';
+$PHPMAILER_LANG['provide_address']      = 'Δώστε τουλάχιστον μια ηλεκτρονική διεύθυνση παραλήπτη.';
+$PHPMAILER_LANG['recipients_failed']    = 'Σφάλμα SMTP: Οι παρακάτω διευθύνσεις παραλήπτη δεν είναι έγκυρες: ';
+$PHPMAILER_LANG['signing']              = 'Σφάλμα υπογραφής: ';
+$PHPMAILER_LANG['smtp_code']            = 'Κώδικάς SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Πρόσθετες πληροφορίες SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Αποτυχία σύνδεσης SMTP.';
+$PHPMAILER_LANG['smtp_detail']          = 'Λεπτομέρεια: ';
+$PHPMAILER_LANG['smtp_error']           = 'Σφάλμα με τον διακομιστή SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Αδυναμία ορισμού ή επαναφοράς μεταβλητής: ';

libs/PHPMailer/language/phpmailer.lang-eo.php

@@ -0,0 +1,37 @@
+<?php
+
+/**
+ * Esperanto PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Robin van der Vliet <info@robinvandervliet.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP-eraro: Ne eblis aŭtentigi.';
+$PHPMAILER_LANG['buggy_php']            = 'Via versio de PHP estas trafita de cimo, kiu povas kaŭzi difektitajn mesaĝojn. Por ripari tion, ŝanĝu al sendado per SMTP, malŝaltu la opcion mail.add_x_header en via php.ini, ŝanĝu al MacOS aŭ Linux, aŭ ĝisdatigu vian PHP al versio 7.0.17+ aŭ 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP-eraro: Ne eblis konektiĝi al la SMTP-gastiganto.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP-eraro: Datumoj ne akceptitaj.';
+$PHPMAILER_LANG['empty_message']        = 'Mesaĝokorpo malplena';
+$PHPMAILER_LANG['encoding']             = 'Nekonata kodoprezento: ';
+$PHPMAILER_LANG['execute']              = 'Ne eblis plenumi: ';
+$PHPMAILER_LANG['extension_missing']    = 'Kromprogramo mankas: ';
+$PHPMAILER_LANG['file_access']          = 'Ne eblis aliri la dosieron: ';
+$PHPMAILER_LANG['file_open']            = 'Dosiera eraro: Ne eblis malfermi la dosieron: ';
+$PHPMAILER_LANG['from_failed']          = 'La sekva(j) sendinto(j) malsukcesis: ';
+$PHPMAILER_LANG['instantiate']          = 'Ne eblis funkciigi la retpoŝtan funkcion.';
+$PHPMAILER_LANG['invalid_address']      = 'Nevalida adreso: ';
+$PHPMAILER_LANG['invalid_header']       = 'Nevalida kaplinia nomo aŭ valoro';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Nevalida enigo de gastiganto: ';
+$PHPMAILER_LANG['invalid_host']         = 'Nevalida gastiganto: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' retpoŝtilo ne estas subtenata.';
+$PHPMAILER_LANG['provide_address']      = 'Vi devas provizi almenaŭ unu retpoŝtadreson de ricevonto.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP-eraro: La sekva(j) ricevonto(j) malsukcesis: ';
+$PHPMAILER_LANG['signing']              = 'Subskriba eraro: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP-kodo: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Pliaj SMTP-informoj: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'La SMTP-konektiĝo malsukcesis.';
+$PHPMAILER_LANG['smtp_detail']          = 'Informoj: ';
+$PHPMAILER_LANG['smtp_error']           = 'Eraro de SMTP-servilo: ';
+$PHPMAILER_LANG['variable_set']         = 'Ne eblas agordi aŭ reagordi la variablon: ';
+$PHPMAILER_LANG['no_smtputf8']          = 'La servilo ne subtenas SMTPUTF8, kiu estas bezonata por sendi al Unicode-adresoj.';
+$PHPMAILER_LANG['imap_recommended']     = 'Uzado de la simpligita adresanalizilo ne estas rekomendita. Instalu la IMAP-kromprogramon por PHP por plena RFC822-analizado.';
+$PHPMAILER_LANG['deprecated_argument']  = 'Malrekomendita argumento: ';

libs/PHPMailer/language/phpmailer.lang-es.php

@@ -0,0 +1,38 @@
+<?php
+
+/**
+ * Spanish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Matt Sturdy <matt.sturdy@gmail.com>
+ * @author Crystopher Glodzienski Cardoso <crystopher.glodzienski@gmail.com>
+ * @author Daniel Cruz <danicruz0415@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Error SMTP: Imposible autentificar.';
+$PHPMAILER_LANG['buggy_php']            = 'Tu versión de PHP ha sido afectada por un bug que puede resultar en mensajes corruptos. Para arreglarlo, cambia a enviar usando SMTP, deshabilita la opción mail.add_x_header en tu php.ini, cambia a MacOS o Linux, o actualiza tu PHP a la versión 7.0.17+ o 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Error SMTP: Imposible conectar al servidor SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Error SMTP: Datos no aceptados.';
+$PHPMAILER_LANG['empty_message']        = 'El cuerpo del mensaje está vacío.';
+$PHPMAILER_LANG['encoding']             = 'Codificación desconocida: ';
+$PHPMAILER_LANG['execute']              = 'Imposible ejecutar: ';
+$PHPMAILER_LANG['extension_missing']    = 'Extensión faltante: ';
+$PHPMAILER_LANG['file_access']          = 'Imposible acceder al archivo: ';
+$PHPMAILER_LANG['file_open']            = 'Error de Archivo: Imposible abrir el archivo: ';
+$PHPMAILER_LANG['from_failed']          = 'La siguiente dirección de remitente falló: ';
+$PHPMAILER_LANG['instantiate']          = 'Imposible crear una instancia de la función Mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Imposible enviar: dirección de email inválido: ';
+$PHPMAILER_LANG['invalid_header']       = 'Nombre o valor de encabezado no válido';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Hostentry inválido: ';
+$PHPMAILER_LANG['invalid_host']         = 'Host inválido: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer no está soportado.';
+$PHPMAILER_LANG['provide_address']      = 'Debe proporcionar al menos una dirección de email de destino.';
+$PHPMAILER_LANG['recipients_failed']    = 'Error SMTP: Los siguientes destinos fallaron: ';
+$PHPMAILER_LANG['signing']              = 'Error al firmar: ';
+$PHPMAILER_LANG['smtp_code']            = 'Código del servidor SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Información adicional del servidor SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() falló.';
+$PHPMAILER_LANG['smtp_detail']          = 'Detalle: ';
+$PHPMAILER_LANG['smtp_error']           = 'Error del servidor SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'No se pudo configurar la variable: ';
+$PHPMAILER_LANG['imap_recommended']     = 'No se recomienda usar el analizador de direcciones simplificado. Instala la extensión IMAP de PHP para un análisis RFC822 más completo.';
+$PHPMAILER_LANG['deprecated_argument']  = 'Argumento obsoleto: ';

libs/PHPMailer/language/phpmailer.lang-et.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Estonian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Indrek Päri
+ * @author Elan Ruusamäe <glen@delfi.ee>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Viga: Autoriseerimise viga.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Viga: Ei õnnestunud luua ühendust SMTP serveriga.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Viga: Vigased andmed.';
+$PHPMAILER_LANG['empty_message']        = 'Tühi kirja sisu';
+$PHPMAILER_LANG["encoding"]             = 'Tundmatu kodeering: ';
+$PHPMAILER_LANG['execute']              = 'Tegevus ebaõnnestus: ';
+$PHPMAILER_LANG['file_access']          = 'Pole piisavalt õiguseid järgneva faili avamiseks: ';
+$PHPMAILER_LANG['file_open']            = 'Faili Viga: Faili avamine ebaõnnestus: ';
+$PHPMAILER_LANG['from_failed']          = 'Järgnev saatja e-posti aadress on vigane: ';
+$PHPMAILER_LANG['instantiate']          = 'mail funktiooni käivitamine ebaõnnestus.';
+$PHPMAILER_LANG['invalid_address']      = 'Saatmine peatatud, e-posti address vigane: ';
+$PHPMAILER_LANG['provide_address']      = 'Te peate määrama vähemalt ühe saaja e-posti aadressi.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' maileri tugi puudub.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Viga: Järgnevate saajate e-posti aadressid on vigased: ';
+$PHPMAILER_LANG["signing"]              = 'Viga allkirjastamisel: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() ebaõnnestus.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP serveri viga: ';
+$PHPMAILER_LANG['variable_set']         = 'Ei õnnestunud määrata või lähtestada muutujat: ';
+$PHPMAILER_LANG['extension_missing']    = 'Nõutud laiendus on puudu: ';

libs/PHPMailer/language/phpmailer.lang-fa.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Persian/Farsi PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ali Jazayeri <jaza.ali@gmail.com>
+ * @author Mohammad Hossein Mojtahedi <mhm5000@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'خطای SMTP: احراز هویت با شکست مواجه شد.';
+$PHPMAILER_LANG['connect_host']         = 'خطای SMTP: اتصال به سرور SMTP برقرار نشد.';
+$PHPMAILER_LANG['data_not_accepted']    = 'خطای SMTP: داده‌ها نا‌درست هستند.';
+$PHPMAILER_LANG['empty_message']        = 'بخش متن پیام خالی است.';
+$PHPMAILER_LANG['encoding']             = 'کد‌گذاری نا‌شناخته: ';
+$PHPMAILER_LANG['execute']              = 'امکان اجرا وجود ندارد: ';
+$PHPMAILER_LANG['file_access']          = 'امکان دسترسی به فایل وجود ندارد: ';
+$PHPMAILER_LANG['file_open']            = 'خطای File: امکان بازکردن فایل وجود ندارد: ';
+$PHPMAILER_LANG['from_failed']          = 'آدرس فرستنده اشتباه است: ';
+$PHPMAILER_LANG['instantiate']          = 'امکان معرفی تابع ایمیل وجود ندارد.';
+$PHPMAILER_LANG['invalid_address']      = 'آدرس ایمیل معتبر نیست: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer پشتیبانی نمی‌شود.';
+$PHPMAILER_LANG['provide_address']      = 'باید حداقل یک آدرس گیرنده وارد کنید.';
+$PHPMAILER_LANG['recipients_failed']    = 'خطای SMTP: ارسال به آدرس گیرنده با خطا مواجه شد: ';
+$PHPMAILER_LANG['signing']              = 'خطا در امضا: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'خطا در اتصال به SMTP.';
+$PHPMAILER_LANG['smtp_error']           = 'خطا در SMTP Server: ';
+$PHPMAILER_LANG['variable_set']         = 'امکان ارسال یا ارسال مجدد متغیر‌ها وجود ندارد: ';
+$PHPMAILER_LANG['extension_missing']    = 'افزونه موجود نیست: ';

libs/PHPMailer/language/phpmailer.lang-fi.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Finnish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Jyry Kuukanen
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP-virhe: käyttäjätunnistus epäonnistui.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP-virhe: yhteys palvelimeen ei onnistu.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP-virhe: data on virheellinen.';
+//$PHPMAILER_LANG['empty_message']        = 'Message body empty';
+$PHPMAILER_LANG['encoding']             = 'Tuntematon koodaustyyppi: ';
+$PHPMAILER_LANG['execute']              = 'Suoritus epäonnistui: ';
+$PHPMAILER_LANG['file_access']          = 'Seuraavaan tiedostoon ei ole oikeuksia: ';
+$PHPMAILER_LANG['file_open']            = 'Tiedostovirhe: Ei voida avata tiedostoa: ';
+$PHPMAILER_LANG['from_failed']          = 'Seuraava lähettäjän osoite on virheellinen: ';
+$PHPMAILER_LANG['instantiate']          = 'mail-funktion luonti epäonnistui.';
+//$PHPMAILER_LANG['invalid_address']      = 'Invalid address: ';
+$PHPMAILER_LANG['mailer_not_supported'] = 'postivälitintyyppiä ei tueta.';
+$PHPMAILER_LANG['provide_address']      = 'Aseta vähintään yksi vastaanottajan sähk&ouml;postiosoite.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP-virhe: seuraava vastaanottaja osoite on virheellinen.';
+//$PHPMAILER_LANG['signing']              = 'Signing Error: ';
+//$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() failed.';
+//$PHPMAILER_LANG['smtp_error']           = 'SMTP server error: ';
+//$PHPMAILER_LANG['variable_set']         = 'Cannot set or reset variable: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-fo.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Faroese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Dávur Sørensen <http://www.profo-webdesign.dk>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP feilur: Kundi ikki góðkenna.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP feilur: Kundi ikki knýta samband við SMTP vert.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP feilur: Data ikki góðkent.';
+//$PHPMAILER_LANG['empty_message']        = 'Message body empty';
+$PHPMAILER_LANG['encoding']             = 'Ókend encoding: ';
+$PHPMAILER_LANG['execute']              = 'Kundi ikki útføra: ';
+$PHPMAILER_LANG['file_access']          = 'Kundi ikki tilganga fílu: ';
+$PHPMAILER_LANG['file_open']            = 'Fílu feilur: Kundi ikki opna fílu: ';
+$PHPMAILER_LANG['from_failed']          = 'fylgjandi Frá/From adressa miseydnaðist: ';
+$PHPMAILER_LANG['instantiate']          = 'Kuni ikki instantiera mail funktión.';
+//$PHPMAILER_LANG['invalid_address']      = 'Invalid address: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' er ikki supporterað.';
+$PHPMAILER_LANG['provide_address']      = 'Tú skal uppgeva minst móttakara-emailadressu(r).';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Feilur: Fylgjandi móttakarar miseydnaðust: ';
+//$PHPMAILER_LANG['signing']              = 'Signing Error: ';
+//$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() failed.';
+//$PHPMAILER_LANG['smtp_error']           = 'SMTP server error: ';
+//$PHPMAILER_LANG['variable_set']         = 'Cannot set or reset variable: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-fr.php

@@ -0,0 +1,36 @@
+<?php
+
+/**
+ * French PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * Some French punctuation requires a thin non-breaking space (U+202F) character before it,
+ * for example before a colon or exclamation mark.
+ * There is one of these characters between these quotes: " "
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Erreur SMTP : échec de l’authentification.';
+$PHPMAILER_LANG['buggy_php']            = 'Votre version de PHP est affectée par un bug qui peut entraîner des messages corrompus. Pour résoudre ce problème, passez à l’envoi par SMTP, désactivez l’option mail.add_x_header dans le fichier php.ini, passez à MacOS ou Linux, ou passez PHP à la version 7.0.17+ ou 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Erreur SMTP : impossible de se connecter au serveur SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Erreur SMTP : données incorrectes.';
+$PHPMAILER_LANG['empty_message']        = 'Corps du message vide.';
+$PHPMAILER_LANG['encoding']             = 'Encodage inconnu : ';
+$PHPMAILER_LANG['execute']              = 'Impossible de lancer l’exécution : ';
+$PHPMAILER_LANG['extension_missing']    = 'Extension manquante : ';
+$PHPMAILER_LANG['file_access']          = 'Impossible d’accéder au fichier : ';
+$PHPMAILER_LANG['file_open']            = 'Ouverture du fichier impossible : ';
+$PHPMAILER_LANG['from_failed']          = 'L’adresse d’expéditeur suivante a échoué : ';
+$PHPMAILER_LANG['instantiate']          = 'Impossible d’instancier la fonction mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Adresse courriel non valide : ';
+$PHPMAILER_LANG['invalid_header']       = 'Nom ou valeur de l’en-tête non valide';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Entrée d’hôte non valide : ';
+$PHPMAILER_LANG['invalid_host']         = 'Hôte non valide : ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' client de messagerie non supporté.';
+$PHPMAILER_LANG['provide_address']      = 'Vous devez fournir au moins une adresse de destinataire.';
+$PHPMAILER_LANG['recipients_failed']    = 'Erreur SMTP : les destinataires suivants ont échoué : ';
+$PHPMAILER_LANG['signing']              = 'Erreur de signature : ';
+$PHPMAILER_LANG['smtp_code']            = 'Code SMTP : ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Informations supplémentaires SMTP : ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'La fonction SMTP connect() a échoué.';
+$PHPMAILER_LANG['smtp_detail']          = 'Détails : ';
+$PHPMAILER_LANG['smtp_error']           = 'Erreur du serveur SMTP : ';
+$PHPMAILER_LANG['variable_set']         = 'Impossible d’initialiser ou de réinitialiser une variable : ';

libs/PHPMailer/language/phpmailer.lang-gl.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Galician PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author by Donato Rouco <donatorouco@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Erro SMTP: Non puido ser autentificado.';
+$PHPMAILER_LANG['connect_host']         = 'Erro SMTP: Non puido conectar co servidor SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Erro SMTP: Datos non aceptados.';
+$PHPMAILER_LANG['empty_message']        = 'Corpo da mensaxe vacía';
+$PHPMAILER_LANG['encoding']             = 'Codificación descoñecida: ';
+$PHPMAILER_LANG['execute']              = 'Non puido ser executado: ';
+$PHPMAILER_LANG['file_access']          = 'Nob puido acceder ó arquivo: ';
+$PHPMAILER_LANG['file_open']            = 'Erro de Arquivo: No puido abrir o arquivo: ';
+$PHPMAILER_LANG['from_failed']          = 'A(s) seguinte(s) dirección(s) de remitente(s) deron erro: ';
+$PHPMAILER_LANG['instantiate']          = 'Non puido crear unha instancia da función Mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Non puido envia-lo correo: dirección de email inválida: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer non está soportado.';
+$PHPMAILER_LANG['provide_address']      = 'Debe engadir polo menos unha dirección de email coma destino.';
+$PHPMAILER_LANG['recipients_failed']    = 'Erro SMTP: Os seguintes destinos fallaron: ';
+$PHPMAILER_LANG['signing']              = 'Erro ó firmar: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() fallou.';
+$PHPMAILER_LANG['smtp_error']           = 'Erro do servidor SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Non puidemos axustar ou reaxustar a variábel: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-he.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Hebrew PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ronny Sherer <ronny@hoojima.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'שגיאת SMTP: פעולת האימות נכשלה.';
+$PHPMAILER_LANG['connect_host']         = 'שגיאת SMTP: לא הצלחתי להתחבר לשרת SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'שגיאת SMTP: מידע לא התקבל.';
+$PHPMAILER_LANG['empty_message']        = 'גוף ההודעה ריק';
+$PHPMAILER_LANG['invalid_address']      = 'כתובת שגויה: ';
+$PHPMAILER_LANG['encoding']             = 'קידוד לא מוכר: ';
+$PHPMAILER_LANG['execute']              = 'לא הצלחתי להפעיל את: ';
+$PHPMAILER_LANG['file_access']          = 'לא ניתן לגשת לקובץ: ';
+$PHPMAILER_LANG['file_open']            = 'שגיאת קובץ: לא ניתן לגשת לקובץ: ';
+$PHPMAILER_LANG['from_failed']          = 'כתובות הנמענים הבאות נכשלו: ';
+$PHPMAILER_LANG['instantiate']          = 'לא הצלחתי להפעיל את פונקציית המייל.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' אינה נתמכת.';
+$PHPMAILER_LANG['provide_address']      = 'חובה לספק לפחות כתובת אחת של מקבל המייל.';
+$PHPMAILER_LANG['recipients_failed']    = 'שגיאת SMTP: הנמענים הבאים נכשלו: ';
+$PHPMAILER_LANG['signing']              = 'שגיאת חתימה: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() failed.';
+$PHPMAILER_LANG['smtp_error']           = 'שגיאת שרת SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'לא ניתן לקבוע או לשנות את המשתנה: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-hi.php

@@ -0,0 +1,35 @@
+<?php
+
+/**
+ * Hindi PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Yash Karanke <mr.karanke@gmail.com>
+ * Rewrite and extension of the work by Jayanti Suthar <suthar.jayanti93@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP त्रुटि: प्रामाणिकता की जांच नहीं हो सका। ';
+$PHPMAILER_LANG['buggy_php']            = 'PHP का आपका संस्करण एक बग से प्रभावित है जिसके परिणामस्वरूप संदेश दूषित हो सकते हैं. इसे ठीक करने हेतु, भेजने के लिए SMTP का उपयोग करे, अपने php.ini में mail.add_x_header विकल्प को अक्षम करें, MacOS या Linux पर जाए, या अपने PHP संस्करण को 7.0.17+ या 7.1.3+ बदले.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP त्रुटि: SMTP सर्वर से कनेक्ट नहीं हो सका। ';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP त्रुटि: डेटा स्वीकार नहीं किया जाता है। ';
+$PHPMAILER_LANG['empty_message']        = 'संदेश खाली है। ';
+$PHPMAILER_LANG['encoding']             = 'अज्ञात एन्कोडिंग प्रकार। ';
+$PHPMAILER_LANG['execute']              = 'आदेश को निष्पादित करने में विफल। ';
+$PHPMAILER_LANG['extension_missing']    = 'एक्सटेन्षन गायब है: ';
+$PHPMAILER_LANG['file_access']          = 'फ़ाइल उपलब्ध नहीं है। ';
+$PHPMAILER_LANG['file_open']            = 'फ़ाइल त्रुटि: फाइल को खोला नहीं जा सका। ';
+$PHPMAILER_LANG['from_failed']          = 'प्रेषक का पता गलत है। ';
+$PHPMAILER_LANG['instantiate']          = 'मेल फ़ंक्शन कॉल नहीं कर सकता है।';
+$PHPMAILER_LANG['invalid_address']      = 'पता गलत है। ';
+$PHPMAILER_LANG['invalid_header']       = 'अमान्य हेडर नाम या मान';
+$PHPMAILER_LANG['invalid_hostentry']    = 'अमान्य hostentry: ';
+$PHPMAILER_LANG['invalid_host']         = 'अमान्य होस्ट: ';
+$PHPMAILER_LANG['mailer_not_supported'] = 'मेल सर्वर के साथ काम नहीं करता है। ';
+$PHPMAILER_LANG['provide_address']      = 'आपको कम से कम एक प्राप्तकर्ता का ई-मेल पता प्रदान करना होगा।';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP त्रुटि: निम्न प्राप्तकर्ताओं को पते भेजने में विफल। ';
+$PHPMAILER_LANG['signing']              = 'साइनअप त्रुटि: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP कोड: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'अतिरिक्त SMTP जानकारी: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP का connect () फ़ंक्शन विफल हुआ। ';
+$PHPMAILER_LANG['smtp_detail']          = 'विवरण: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP सर्वर त्रुटि। ';
+$PHPMAILER_LANG['variable_set']         = 'चर को बना या संशोधित नहीं किया जा सकता। ';

libs/PHPMailer/language/phpmailer.lang-hr.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Croatian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Hrvoj3e <hrvoj3e@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Greška: Neuspjela autentikacija.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Greška: Ne mogu se spojiti na SMTP poslužitelj.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Greška: Podatci nisu prihvaćeni.';
+$PHPMAILER_LANG['empty_message']        = 'Sadržaj poruke je prazan.';
+$PHPMAILER_LANG['encoding']             = 'Nepoznati encoding: ';
+$PHPMAILER_LANG['execute']              = 'Nije moguće izvršiti naredbu: ';
+$PHPMAILER_LANG['file_access']          = 'Nije moguće pristupiti datoteci: ';
+$PHPMAILER_LANG['file_open']            = 'Nije moguće otvoriti datoteku: ';
+$PHPMAILER_LANG['from_failed']          = 'SMTP Greška: Slanje s navedenih e-mail adresa nije uspjelo: ';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Greška: Slanje na navedenih e-mail adresa nije uspjelo: ';
+$PHPMAILER_LANG['instantiate']          = 'Ne mogu pokrenuti mail funkcionalnost.';
+$PHPMAILER_LANG['invalid_address']      = 'E-mail nije poslan. Neispravna e-mail adresa: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nije podržan.';
+$PHPMAILER_LANG['provide_address']      = 'Definirajte barem jednu adresu primatelja.';
+$PHPMAILER_LANG['signing']              = 'Greška prilikom prijave: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Spajanje na SMTP poslužitelj nije uspjelo.';
+$PHPMAILER_LANG['smtp_error']           = 'Greška SMTP poslužitelja: ';
+$PHPMAILER_LANG['variable_set']         = 'Ne mogu postaviti varijablu niti ju vratiti nazad: ';
+$PHPMAILER_LANG['extension_missing']    = 'Nedostaje proširenje: ';

libs/PHPMailer/language/phpmailer.lang-hu.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Hungarian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author @dominicus-75
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP hiba: az azonosítás sikertelen.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP hiba: nem lehet kapcsolódni az SMTP-szerverhez.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP hiba: adatok visszautasítva.';
+$PHPMAILER_LANG['empty_message']        = 'Üres az üzenettörzs.';
+$PHPMAILER_LANG['encoding']             = 'Ismeretlen kódolás: ';
+$PHPMAILER_LANG['execute']              = 'Nem lehet végrehajtani: ';
+$PHPMAILER_LANG['file_access']          = 'A következő fájl nem elérhető: ';
+$PHPMAILER_LANG['file_open']            = 'Fájl hiba: a következő fájlt nem lehet megnyitni: ';
+$PHPMAILER_LANG['from_failed']          = 'A feladóként megadott következő cím hibás: ';
+$PHPMAILER_LANG['instantiate']          = 'A PHP mail() függvényt nem sikerült végrehajtani.';
+$PHPMAILER_LANG['invalid_address']      = 'Érvénytelen cím: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' a mailer-osztály nem támogatott.';
+$PHPMAILER_LANG['provide_address']      = 'Legalább egy címzettet fel kell tüntetni.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP hiba: a címzettként megadott következő címek hibásak: ';
+$PHPMAILER_LANG['signing']              = 'Hibás aláírás: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Hiba az SMTP-kapcsolatban.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP-szerver hiba: ';
+$PHPMAILER_LANG['variable_set']         = 'A következő változók beállítása nem sikerült: ';
+$PHPMAILER_LANG['extension_missing']    = 'Bővítmény hiányzik: ';

libs/PHPMailer/language/phpmailer.lang-hy.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Armenian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Hrayr Grigoryan <hrayr@bits.am>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP -ի սխալ: չհաջողվեց ստուգել իսկությունը.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP -ի սխալ: չհաջողվեց կապ հաստատել SMTP սերվերի հետ.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP -ի սխալ: տվյալները ընդունված չեն.';
+$PHPMAILER_LANG['empty_message']        = 'Հաղորդագրությունը դատարկ է';
+$PHPMAILER_LANG['encoding']             = 'Կոդավորման անհայտ տեսակ: ';
+$PHPMAILER_LANG['execute']              = 'Չհաջողվեց իրականացնել հրամանը: ';
+$PHPMAILER_LANG['file_access']          = 'Ֆայլը հասանելի չէ: ';
+$PHPMAILER_LANG['file_open']            = 'Ֆայլի սխալ: ֆայլը չհաջողվեց բացել: ';
+$PHPMAILER_LANG['from_failed']          = 'Ուղարկողի հետևյալ հասցեն սխալ է: ';
+$PHPMAILER_LANG['instantiate']          = 'Հնարավոր չէ կանչել mail ֆունկցիան.';
+$PHPMAILER_LANG['invalid_address']      = 'Հասցեն սխալ է: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' փոստային սերվերի հետ չի աշխատում.';
+$PHPMAILER_LANG['provide_address']      = 'Անհրաժեշտ է տրամադրել գոնե մեկ ստացողի e-mail հասցե.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP -ի սխալ: չի հաջողվել ուղարկել հետևյալ ստացողների հասցեներին: ';
+$PHPMAILER_LANG['signing']              = 'Ստորագրման սխալ: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP -ի connect() ֆունկցիան չի հաջողվել';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP սերվերի սխալ: ';
+$PHPMAILER_LANG['variable_set']         = 'Չի հաջողվում ստեղծել կամ վերափոխել փոփոխականը: ';
+$PHPMAILER_LANG['extension_missing']    = 'Հավելվածը բացակայում է: ';

libs/PHPMailer/language/phpmailer.lang-id.php

@@ -0,0 +1,31 @@
+<?php
+
+/**
+ * Indonesian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Cecep Prawiro <cecep.prawiro@gmail.com>
+ * @author @januridp
+ * @author Ian Mustafa <mail@ianmustafa.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Kesalahan SMTP: Tidak dapat mengotentikasi.';
+$PHPMAILER_LANG['connect_host']         = 'Kesalahan SMTP: Tidak dapat terhubung ke host SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Kesalahan SMTP: Data tidak diterima.';
+$PHPMAILER_LANG['empty_message']        = 'Isi pesan kosong';
+$PHPMAILER_LANG['encoding']             = 'Pengkodean karakter tidak dikenali: ';
+$PHPMAILER_LANG['execute']              = 'Tidak dapat menjalankan proses: ';
+$PHPMAILER_LANG['file_access']          = 'Tidak dapat mengakses berkas: ';
+$PHPMAILER_LANG['file_open']            = 'Kesalahan Berkas: Berkas tidak dapat dibuka: ';
+$PHPMAILER_LANG['from_failed']          = 'Alamat pengirim berikut mengakibatkan kesalahan: ';
+$PHPMAILER_LANG['instantiate']          = 'Tidak dapat menginisialisasi fungsi surel.';
+$PHPMAILER_LANG['invalid_address']      = 'Gagal terkirim, alamat surel tidak sesuai: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Gagal terkirim, entri host tidak sesuai: ';
+$PHPMAILER_LANG['invalid_host']         = 'Gagal terkirim, host tidak sesuai: ';
+$PHPMAILER_LANG['provide_address']      = 'Harus tersedia minimal satu alamat tujuan';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer tidak didukung';
+$PHPMAILER_LANG['recipients_failed']    = 'Kesalahan SMTP: Alamat tujuan berikut menyebabkan kesalahan: ';
+$PHPMAILER_LANG['signing']              = 'Kesalahan dalam penandatangan SSL: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() gagal.';
+$PHPMAILER_LANG['smtp_error']           = 'Kesalahan pada pelayan SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Tidak dapat mengatur atau mengatur ulang variabel: ';
+$PHPMAILER_LANG['extension_missing']    = 'Ekstensi PHP tidak tersedia: ';

libs/PHPMailer/language/phpmailer.lang-it.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Italian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ilias Bartolini <brain79@inwind.it>
+ * @author Stefano Sabatini <sabas88@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Error: Impossibile autenticarsi.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Error: Impossibile connettersi all\'host SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Error: Dati non accettati dal server.';
+$PHPMAILER_LANG['empty_message']        = 'Il corpo del messaggio è vuoto';
+$PHPMAILER_LANG['encoding']             = 'Codifica dei caratteri sconosciuta: ';
+$PHPMAILER_LANG['execute']              = 'Impossibile eseguire l\'operazione: ';
+$PHPMAILER_LANG['file_access']          = 'Impossibile accedere al file: ';
+$PHPMAILER_LANG['file_open']            = 'File Error: Impossibile aprire il file: ';
+$PHPMAILER_LANG['from_failed']          = 'I seguenti indirizzi mittenti hanno generato errore: ';
+$PHPMAILER_LANG['instantiate']          = 'Impossibile istanziare la funzione mail';
+$PHPMAILER_LANG['invalid_address']      = 'Impossibile inviare, l\'indirizzo email non è valido: ';
+$PHPMAILER_LANG['provide_address']      = 'Deve essere fornito almeno un indirizzo ricevente';
+$PHPMAILER_LANG['mailer_not_supported'] = 'Mailer non supportato';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Error: I seguenti indirizzi destinatari hanno generato un errore: ';
+$PHPMAILER_LANG['signing']              = 'Errore nella firma: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() fallita.';
+$PHPMAILER_LANG['smtp_error']           = 'Errore del server SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Impossibile impostare o resettare la variabile: ';
+$PHPMAILER_LANG['extension_missing']    = 'Estensione mancante: ';

libs/PHPMailer/language/phpmailer.lang-ja.php

@@ -0,0 +1,37 @@
+<?php
+
+/**
+ * Japanese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Mitsuhiro Yoshida <https://mitstek.com>
+ * @author Yoshi Sakai <http://bluemooninc.jp/>
+ * @author Arisophy <https://github.com/arisophy/>
+ * @author ARAKI Musashi <https://github.com/arakim/>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTPエラー: 認証できませんでした。';
+$PHPMAILER_LANG['buggy_php']            = 'ご利用のバージョンのPHPには不具合があり、メッセージが破損するおそれがあります。問題の解決は以下のいずれかを行ってください。SMTPでの送信に切り替える。php.iniのmail.add_x_headerをoffにする。MacOSまたはLinuxに切り替える。PHPバージョン7.0.17以降または7.1.3以降にアップグレードする。';
+$PHPMAILER_LANG['connect_host']         = 'SMTPエラー: SMTPホストに接続できませんでした。';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTPエラー: データが受け付けられませんでした。';
+$PHPMAILER_LANG['empty_message']        = 'メール本文が空です。';
+$PHPMAILER_LANG['encoding']             = '不明なエンコーディング: ';
+$PHPMAILER_LANG['execute']              = '実行できませんでした: ';
+$PHPMAILER_LANG['extension_missing']    = '拡張機能が見つかりません: ';
+$PHPMAILER_LANG['file_access']          = 'ファイルにアクセスできません: ';
+$PHPMAILER_LANG['file_open']            = 'ファイルエラー: ファイルを開けません: ';
+$PHPMAILER_LANG['from_failed']          = 'Fromアドレスを登録する際にエラーが発生しました: ';
+$PHPMAILER_LANG['instantiate']          = 'メール関数が正常に動作しませんでした。';
+$PHPMAILER_LANG['invalid_address']      = '不正なメールアドレス: ';
+$PHPMAILER_LANG['invalid_header']       = '不正なヘッダー名またはその内容';
+$PHPMAILER_LANG['invalid_hostentry']    = '不正なホストエントリー: ';
+$PHPMAILER_LANG['invalid_host']         = '不正なホスト: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' メーラーがサポートされていません。';
+$PHPMAILER_LANG['provide_address']      = '少なくとも1つメールアドレスを 指定する必要があります。';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTPエラー: 次の受信者アドレスに 間違いがあります: ';
+$PHPMAILER_LANG['signing']              = '署名エラー: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTPコード: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'SMTP追加情報: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP接続に失敗しました。';
+$PHPMAILER_LANG['smtp_detail']          = '詳細: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTPサーバーエラー: ';
+$PHPMAILER_LANG['variable_set']         = '変数が存在しません: ';

libs/PHPMailer/language/phpmailer.lang-ka.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Georgian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Avtandil Kikabidze aka LONGMAN <akalongman@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP შეცდომა: ავტორიზაცია შეუძლებელია.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP შეცდომა: SMTP სერვერთან დაკავშირება შეუძლებელია.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP შეცდომა: მონაცემები არ იქნა მიღებული.';
+$PHPMAILER_LANG['encoding']             = 'კოდირების უცნობი ტიპი: ';
+$PHPMAILER_LANG['execute']              = 'შეუძლებელია შემდეგი ბრძანების შესრულება: ';
+$PHPMAILER_LANG['file_access']          = 'შეუძლებელია წვდომა ფაილთან: ';
+$PHPMAILER_LANG['file_open']            = 'ფაილური სისტემის შეცდომა: არ იხსნება ფაილი: ';
+$PHPMAILER_LANG['from_failed']          = 'გამგზავნის არასწორი მისამართი: ';
+$PHPMAILER_LANG['instantiate']          = 'mail ფუნქციის გაშვება ვერ ხერხდება.';
+$PHPMAILER_LANG['provide_address']      = 'გთხოვთ მიუთითოთ ერთი ადრესატის e-mail მისამართი მაინც.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' - საფოსტო სერვერის მხარდაჭერა არ არის.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP შეცდომა: შემდეგ მისამართებზე გაგზავნა ვერ მოხერხდა: ';
+$PHPMAILER_LANG['empty_message']        = 'შეტყობინება ცარიელია';
+$PHPMAILER_LANG['invalid_address']      = 'არ გაიგზავნა, e-mail მისამართის არასწორი ფორმატი: ';
+$PHPMAILER_LANG['signing']              = 'ხელმოწერის შეცდომა: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'შეცდომა SMTP სერვერთან დაკავშირებისას';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP სერვერის შეცდომა: ';
+$PHPMAILER_LANG['variable_set']         = 'შეუძლებელია შემდეგი ცვლადის შექმნა ან შეცვლა: ';
+$PHPMAILER_LANG['extension_missing']    = 'ბიბლიოთეკა არ არსებობს: ';

libs/PHPMailer/language/phpmailer.lang-ko.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Korean PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author ChalkPE <amato0617@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP 오류: 인증할 수 없습니다.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP 오류: SMTP 호스트에 접속할 수 없습니다.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP 오류: 데이터가 받아들여지지 않았습니다.';
+$PHPMAILER_LANG['empty_message']        = '메세지 내용이 없습니다';
+$PHPMAILER_LANG['encoding']             = '알 수 없는 인코딩: ';
+$PHPMAILER_LANG['execute']              = '실행 불가: ';
+$PHPMAILER_LANG['file_access']          = '파일 접근 불가: ';
+$PHPMAILER_LANG['file_open']            = '파일 오류: 파일을 열 수 없습니다: ';
+$PHPMAILER_LANG['from_failed']          = '다음 From 주소에서 오류가 발생했습니다: ';
+$PHPMAILER_LANG['instantiate']          = 'mail 함수를 인스턴스화할 수 없습니다';
+$PHPMAILER_LANG['invalid_address']      = '잘못된 주소: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' 메일러는 지원되지 않습니다.';
+$PHPMAILER_LANG['provide_address']      = '적어도 한 개 이상의 수신자 메일 주소를 제공해야 합니다.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP 오류: 다음 수신자에서 오류가 발생했습니다: ';
+$PHPMAILER_LANG['signing']              = '서명 오류: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP 연결을 실패하였습니다.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP 서버 오류: ';
+$PHPMAILER_LANG['variable_set']         = '변수 설정 및 초기화 불가: ';
+$PHPMAILER_LANG['extension_missing']    = '확장자 없음: ';

libs/PHPMailer/language/phpmailer.lang-ku.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Kurdish (Sorani) PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Halo Salman <halo@home4t.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'هەڵەی SMTP : نەتوانرا کۆدەکە پشتڕاست بکرێتەوە ';
+$PHPMAILER_LANG['connect_host']         = 'هەڵەی SMTP: نەتوانرا پەیوەندی بە سێرڤەرەوە بکات SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'هەڵەی SMTP: ئەو زانیاریانە قبوڵ نەکرا.';
+$PHPMAILER_LANG['empty_message']        = 'پەیامەکە بەتاڵە';
+$PHPMAILER_LANG['encoding']             = 'کۆدکردنی نەزانراو : ';
+$PHPMAILER_LANG['execute']              = 'ناتوانرێت جێبەجێ بکرێت: ';
+$PHPMAILER_LANG['file_access']          = 'ناتوانرێت دەستت بگات بە فایلەکە: ';
+$PHPMAILER_LANG['file_open']            = 'هەڵەی پەڕگە(فایل): ناتوانرێت بکرێتەوە: ';
+$PHPMAILER_LANG['from_failed']          = 'هەڵە لە ئاستی ناونیشانی نێرەر: ';
+$PHPMAILER_LANG['instantiate']          = 'ناتوانرێت خزمەتگوزاری پۆستە پێشکەش بکرێت.';
+$PHPMAILER_LANG['invalid_address']      = 'نەتوانرا بنێردرێت ، چونکە ناونیشانی ئیمەیڵەکە نادروستە: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' مەیلەر پشتگیری ناکات';
+$PHPMAILER_LANG['provide_address']      = 'دەبێت ناونیشانی ئیمەیڵی لانیکەم یەک وەرگر دابین بکرێت.';
+$PHPMAILER_LANG['recipients_failed']    = ' هەڵەی SMTP: ئەم هەڵانەی خوارەوەشکستی هێنا لە ناردن بۆ هەردووکیان: ';
+$PHPMAILER_LANG['signing']              = 'هەڵەی واژۆ: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect()پەیوەندی شکستی هێنا .';
+$PHPMAILER_LANG['smtp_error']           = 'هەڵەی ئاستی سێرڤەری SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'ناتوانرێت بیگۆڕیت یان دوبارە بینێریتەوە: ';
+$PHPMAILER_LANG['extension_missing']    = 'درێژکراوە نەماوە: ';

libs/PHPMailer/language/phpmailer.lang-lt.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Lithuanian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Dainius Kaupaitis <dk@sum.lt>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP klaida: autentifikacija nepavyko.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP klaida: nepavyksta prisijungti prie SMTP stoties.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP klaida: duomenys nepriimti.';
+$PHPMAILER_LANG['empty_message']        = 'Laiško turinys tuščias';
+$PHPMAILER_LANG['encoding']             = 'Neatpažinta koduotė: ';
+$PHPMAILER_LANG['execute']              = 'Nepavyko įvykdyti komandos: ';
+$PHPMAILER_LANG['file_access']          = 'Byla nepasiekiama: ';
+$PHPMAILER_LANG['file_open']            = 'Bylos klaida: Nepavyksta atidaryti: ';
+$PHPMAILER_LANG['from_failed']          = 'Neteisingas siuntėjo adresas: ';
+$PHPMAILER_LANG['instantiate']          = 'Nepavyko paleisti mail funkcijos.';
+$PHPMAILER_LANG['invalid_address']      = 'Neteisingas adresas: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' pašto stotis nepalaikoma.';
+$PHPMAILER_LANG['provide_address']      = 'Nurodykite bent vieną gavėjo adresą.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP klaida: nepavyko išsiųsti šiems gavėjams: ';
+$PHPMAILER_LANG['signing']              = 'Prisijungimo klaida: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP susijungimo klaida';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP stoties klaida: ';
+$PHPMAILER_LANG['variable_set']         = 'Nepavyko priskirti reikšmės kintamajam: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-lv.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Latvian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Eduards M. <e@npd.lv>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP kļūda: Autorizācija neizdevās.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Kļūda: Nevar izveidot savienojumu ar SMTP serveri.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Kļūda: Nepieņem informāciju.';
+$PHPMAILER_LANG['empty_message']        = 'Ziņojuma teksts ir tukšs';
+$PHPMAILER_LANG['encoding']             = 'Neatpazīts kodējums: ';
+$PHPMAILER_LANG['execute']              = 'Neizdevās izpildīt komandu: ';
+$PHPMAILER_LANG['file_access']          = 'Fails nav pieejams: ';
+$PHPMAILER_LANG['file_open']            = 'Faila kļūda: Nevar atvērt failu: ';
+$PHPMAILER_LANG['from_failed']          = 'Nepareiza sūtītāja adrese: ';
+$PHPMAILER_LANG['instantiate']          = 'Nevar palaist sūtīšanas funkciju.';
+$PHPMAILER_LANG['invalid_address']      = 'Nepareiza adrese: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' sūtītājs netiek atbalstīts.';
+$PHPMAILER_LANG['provide_address']      = 'Lūdzu, norādiet vismaz vienu adresātu.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP kļūda: neizdevās nosūtīt šādiem saņēmējiem: ';
+$PHPMAILER_LANG['signing']              = 'Autorizācijas kļūda: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP savienojuma kļūda';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP servera kļūda: ';
+$PHPMAILER_LANG['variable_set']         = 'Nevar piešķirt mainīgā vērtību: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-mg.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Malagasy PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Hackinet <piyushjha8164@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Hadisoana SMTP: Tsy nahomby ny fanamarinana.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Error: Tsy afaka mampifandray amin\'ny mpampiantrano SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP diso: tsy voarakitra ny angona.';
+$PHPMAILER_LANG['empty_message']        = 'Tsy misy ny votoaty mailaka.';
+$PHPMAILER_LANG['encoding']             = 'Tsy fantatra encoding: ';
+$PHPMAILER_LANG['execute']              = 'Tsy afaka manatanteraka ity baiko manaraka ity: ';
+$PHPMAILER_LANG['file_access']          = 'Tsy nahomby ny fidirana amin\'ity rakitra ity: ';
+$PHPMAILER_LANG['file_open']            = 'Hadisoana diso: Tsy afaka nanokatra ity file manaraka ity: ';
+$PHPMAILER_LANG['from_failed']          = 'Ny adiresy iraka manaraka dia diso: ';
+$PHPMAILER_LANG['instantiate']          = 'Tsy afaka nanomboka ny hetsika mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Tsy mety ny adiresy: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer tsy manohana.';
+$PHPMAILER_LANG['provide_address']      = 'Alefaso azafady iray adiresy iray farafahakeliny.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Error: Tsy mety ireo mpanaraka ireto: ';
+$PHPMAILER_LANG['signing']              = 'Error nandritra ny sonia:';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Tsy nahomby ny fifandraisana tamin\'ny server SMTP.';
+$PHPMAILER_LANG['smtp_error']           = 'Fahadisoana tamin\'ny server SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Tsy azo atao ny mametraka na mamerina ny variable: ';
+$PHPMAILER_LANG['extension_missing']    = 'Tsy hita ny ampahany: ';

libs/PHPMailer/language/phpmailer.lang-mn.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Mongolian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author @wispas
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Алдаа SMTP: Холбогдож чадсангүй.';
+$PHPMAILER_LANG['connect_host']         = 'Алдаа SMTP: SMTP- сервертэй холбогдож болохгүй байна.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Алдаа SMTP: зөвшөөрөгдсөнгүй.';
+$PHPMAILER_LANG['encoding']             = 'Тодорхойгүй кодчилол: ';
+$PHPMAILER_LANG['execute']              = 'Коммандыг гүйцэтгэх боломжгүй байна: ';
+$PHPMAILER_LANG['file_access']          = 'Файлд хандах боломжгүй байна: ';
+$PHPMAILER_LANG['file_open']            = 'Файлын алдаа: файлыг нээх боломжгүй байна: ';
+$PHPMAILER_LANG['from_failed']          = 'Илгээгчийн хаяг буруу байна: ';
+$PHPMAILER_LANG['instantiate']          = 'Mail () функцийг ажиллуулах боломжгүй байна.';
+$PHPMAILER_LANG['provide_address']      = 'Хүлээн авагчийн имэйл хаягийг оруулна уу.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' — мэйл серверийг дэмжсэнгүй.';
+$PHPMAILER_LANG['recipients_failed']    = 'Алдаа SMTP: ийм хаягийг илгээж чадсангүй: ';
+$PHPMAILER_LANG['empty_message']        = 'Хоосон мессэж';
+$PHPMAILER_LANG['invalid_address']      = 'И-Мэйл буруу форматтай тул илгээх боломжгүй: ';
+$PHPMAILER_LANG['signing']              = 'Гарын үсгийн алдаа: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP сервертэй холбогдоход алдаа гарлаа';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP серверийн алдаа: ';
+$PHPMAILER_LANG['variable_set']         = 'Хувьсагчийг тохируулах эсвэл дахин тохируулах боломжгүй байна: ';
+$PHPMAILER_LANG['extension_missing']    = 'Өргөтгөл байхгүй: ';

libs/PHPMailer/language/phpmailer.lang-ms.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Malaysian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Nawawi Jamili <nawawi@rutweb.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Ralat SMTP: Tidak dapat pengesahan.';
+$PHPMAILER_LANG['connect_host']         = 'Ralat SMTP: Tidak dapat menghubungi hos pelayan SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Ralat SMTP: Data tidak diterima oleh pelayan.';
+$PHPMAILER_LANG['empty_message']        = 'Tiada isi untuk mesej';
+$PHPMAILER_LANG['encoding']             = 'Pengekodan tidak diketahui: ';
+$PHPMAILER_LANG['execute']              = 'Tidak dapat melaksanakan: ';
+$PHPMAILER_LANG['file_access']          = 'Tidak dapat mengakses fail: ';
+$PHPMAILER_LANG['file_open']            = 'Ralat Fail: Tidak dapat membuka fail: ';
+$PHPMAILER_LANG['from_failed']          = 'Berikut merupakan ralat dari alamat e-mel: ';
+$PHPMAILER_LANG['instantiate']          = 'Tidak dapat memberi contoh fungsi e-mel.';
+$PHPMAILER_LANG['invalid_address']      = 'Alamat emel tidak sah: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' jenis penghantar emel tidak disokong.';
+$PHPMAILER_LANG['provide_address']      = 'Anda perlu menyediakan sekurang-kurangnya satu alamat e-mel penerima.';
+$PHPMAILER_LANG['recipients_failed']    = 'Ralat SMTP: Penerima e-mel berikut telah gagal: ';
+$PHPMAILER_LANG['signing']              = 'Ralat pada tanda tangan: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() telah gagal.';
+$PHPMAILER_LANG['smtp_error']           = 'Ralat pada pelayan SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Tidak boleh menetapkan atau menetapkan semula pembolehubah: ';
+$PHPMAILER_LANG['extension_missing']    = 'Sambungan hilang: ';

libs/PHPMailer/language/phpmailer.lang-nb.php

@@ -0,0 +1,37 @@
+<?php
+
+/**
+ * Norwegian Bokmål PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Wera AS <wordpress@wera.no>
+ */
+
+ $PHPMAILER_LANG['authenticate']         = 'SMTP-feil: Kunne ikke autentisere.';
+ $PHPMAILER_LANG['buggy_php']            = 'Din versjon av PHP er påvirket av en feil som kan føre til ødelagte meldinger. For å løse problemet kan du bytte til sending via SMTP, deaktivere mail.add_x_header-alternativet i php.ini, bytte til MacOS eller Linux, eller oppgradere PHP til versjon 7.0.17+ eller 7.1.3+.';
+ $PHPMAILER_LANG['connect_host']         = 'SMTP-feil: Kunne ikke koble til SMTP-vert.';
+ $PHPMAILER_LANG['data_not_accepted']    = 'SMTP-feil: data ikke akseptert.';
+ $PHPMAILER_LANG['empty_message']        = 'Meldingsinnholdet er tomt';
+ $PHPMAILER_LANG['encoding']             = 'Ukjent koding: ';
+ $PHPMAILER_LANG['execute']              = 'Kunne ikke utføres: ';
+ $PHPMAILER_LANG['extension_missing']    = 'Utvidelse mangler: ';
+ $PHPMAILER_LANG['file_access']          = 'Kunne ikke få tilgang til filen: ';
+ $PHPMAILER_LANG['file_open']            = 'Feil i fil: Kunne ikke åpne filen: ';
+ $PHPMAILER_LANG['from_failed']          = 'Følgende avsenderadresse mislyktes: ';
+ $PHPMAILER_LANG['instantiate']          = 'Kunne ikke starte e-postfunksjonen.';
+ $PHPMAILER_LANG['invalid_address']      = 'Ugyldig adresse: ';
+ $PHPMAILER_LANG['invalid_header']       = 'Ugyldig headernavn eller verdi';
+ $PHPMAILER_LANG['invalid_hostentry']    = 'Ugyldig vertsinngang: ';
+ $PHPMAILER_LANG['invalid_host']         = 'Ugyldig vert: ';
+ $PHPMAILER_LANG['mailer_not_supported'] = ' sender er ikke støttet.';
+ $PHPMAILER_LANG['provide_address']      = 'Du må oppgi minst én mottaker-e-postadresse.';
+ $PHPMAILER_LANG['recipients_failed']    = 'SMTP-feil: Følgende mottakeradresser feilet: ';
+ $PHPMAILER_LANG['signing']              = 'Signeringsfeil: ';
+ $PHPMAILER_LANG['smtp_code']            = 'SMTP-kode: ';
+ $PHPMAILER_LANG['smtp_code_ex']         = 'Ytterligere SMTP-info: ';
+ $PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP connect() mislyktes.';
+ $PHPMAILER_LANG['smtp_detail']          = 'Detaljer: ';
+ $PHPMAILER_LANG['smtp_error']           = 'SMTP-serverfeil: ';
+ $PHPMAILER_LANG['variable_set']         = 'Kan ikke angi eller tilbakestille variabel: ';
+ $PHPMAILER_LANG['no_smtputf8']          = 'Serveren støtter ikke SMTPUTF8, som er nødvendig for å sende til Unicode-adresser.';
+ $PHPMAILER_LANG['imap_recommended']     = 'Det anbefales ikke å bruke forenklet adresseanalyse. Installer PHP IMAP-utvidelsen for full RFC822-analyse.';
+ $PHPMAILER_LANG['deprecated_argument']  = 'Avviklet argument: ';

libs/PHPMailer/language/phpmailer.lang-nl.php

@@ -0,0 +1,38 @@
+<?php
+
+/**
+ * Dutch PHPMailer language file: refer to PHPMailer.php for definitive list.
+ * @package PHPMailer
+ * @author Tuxion <team@tuxion.nl>
+ * @author Robin van der Vliet <info@robinvandervliet.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP-fout: authenticatie mislukt.';
+$PHPMAILER_LANG['buggy_php']            = 'PHP-versie gedetecteerd die onderhevig is aan een bug die kan resulteren in gecorrumpeerde berichten. Om dit te voorkomen, gebruik SMTP voor het verzenden van berichten, zet de optie mail.add_x_header in uw php.ini uit, gebruik MacOS of Linux, of pas de gebruikte PHP-versie aan naar versie 7.0.17+ or 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP-fout: kon niet verbinden met SMTP-host.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP-fout: data niet geaccepteerd.';
+$PHPMAILER_LANG['empty_message']        = 'Berichttekst is leeg';
+$PHPMAILER_LANG['encoding']             = 'Onbekende codering: ';
+$PHPMAILER_LANG['execute']              = 'Kon niet uitvoeren: ';
+$PHPMAILER_LANG['extension_missing']    = 'Extensie afwezig: ';
+$PHPMAILER_LANG['file_access']          = 'Kreeg geen toegang tot bestand: ';
+$PHPMAILER_LANG['file_open']            = 'Bestandsfout: kon bestand niet openen: ';
+$PHPMAILER_LANG['from_failed']          = 'Het volgende afzenderadres is mislukt: ';
+$PHPMAILER_LANG['instantiate']          = 'Kon mailfunctie niet initialiseren.';
+$PHPMAILER_LANG['invalid_address']      = 'Ongeldig adres: ';
+$PHPMAILER_LANG['invalid_header']       = 'Ongeldige headernaam of -waarde';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Ongeldige hostentry: ';
+$PHPMAILER_LANG['invalid_host']         = 'Ongeldige host: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer wordt niet ondersteund.';
+$PHPMAILER_LANG['provide_address']      = 'Er moet minstens één ontvanger worden opgegeven.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP-fout: de volgende ontvangers zijn mislukt: ';
+$PHPMAILER_LANG['signing']              = 'Signeerfout: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP-code: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Aanvullende SMTP-informatie: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP-verbinding mislukt.';
+$PHPMAILER_LANG['smtp_detail']          = 'Detail: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP-serverfout: ';
+$PHPMAILER_LANG['variable_set']         = 'Kan de volgende variabele niet instellen of herstellen: ';
+$PHPMAILER_LANG['no_smtputf8']          = 'De server ondersteunt geen SMTPUTF8 dat nodig is om naar Unicode-adressen te sturen.';
+$PHPMAILER_LANG['imap_recommended']     = 'Het gebruik van de vereenvoudigde adresparser is niet aanbevolen. Installeer de IMAP-extensie voor PHP voor volledige RFC822-ondersteuning.';
+$PHPMAILER_LANG['deprecated_argument']  = 'Verouderd argument: ';

libs/PHPMailer/language/phpmailer.lang-pl.php

@@ -0,0 +1,33 @@
+<?php
+
+/**
+ * Polish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Błąd SMTP: nie udało się przeprowadzić uwierzytelnienia.';
+$PHPMAILER_LANG['buggy_php']            = 'Używana wersja PHP zawiera błąd, który może powodować uszkodzenie wiadomości. Aby temu zapobiec, użyj wysyłki przez SMTP, wyłącz opcję mail.add_x_header w php.ini, przejdź na macOS lub Linux, lub zaktualizuj PHP do wersji 7.0.17+ albo 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Błąd SMTP: nie udało się połączyć z serwerem (hostem).';
+$PHPMAILER_LANG['data_not_accepted']    = 'Błąd SMTP: dane wiadomości nie zostały przyjęte przez serwer.';
+$PHPMAILER_LANG['empty_message']        = 'Nie można wysłać pustej wiadomości.';
+$PHPMAILER_LANG['encoding']             = 'Nieobsługiwane kodowanie znaków: ';
+$PHPMAILER_LANG['execute']              = 'Nie udało się uruchomić polecenia: ';
+$PHPMAILER_LANG['extension_missing']    = 'Brak wymaganego rozszerzenia PHP: ';
+$PHPMAILER_LANG['file_access']          = 'Brak dostępu do pliku: ';
+$PHPMAILER_LANG['file_open']            = 'Nie udało się otworzyć pliku: ';
+$PHPMAILER_LANG['from_failed']          = 'Nieprawidłowy adres nadawcy: ';
+$PHPMAILER_LANG['instantiate']          = 'Nie można zainicjować funkcji mail(). Sprawdź konfigurację serwera.';
+$PHPMAILER_LANG['invalid_address']      = 'Nie można wysłać wiadomości. Nieprawidłowy adres odbiorcy: ';
+$PHPMAILER_LANG['invalid_header']       = 'Nieprawidłowa nazwa lub wartość nagłówka.';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Nieprawidłowy wpis hosta: ';
+$PHPMAILER_LANG['invalid_host']         = 'Nieprawidłowa nazwa hosta: ';
+$PHPMAILER_LANG['provide_address']      = 'Musisz podać co najmniej jeden prawidłowy adres e-mail odbiorcy.';
+$PHPMAILER_LANG['mailer_not_supported'] = 'Wybrana metoda wysyłki wiadomości nie jest obsługiwana.';
+$PHPMAILER_LANG['recipients_failed']    = 'Błąd SMTP: nie udało się wysłać do następujących odbiorców: ';
+$PHPMAILER_LANG['signing']              = 'Błąd podpisywania wiadomości cyfrowo: ';
+$PHPMAILER_LANG['smtp_code']            = 'Kod odpowiedzi SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Dodatkowe informacje serwera SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Nie udało się nawiązać połączenia za pomocą SMTP Connect().';
+$PHPMAILER_LANG['smtp_detail']          = 'Szczegóły błędu: ';
+$PHPMAILER_LANG['smtp_error']           = 'Błąd serwera SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Nie można ustawić lub zmodyfikować zmiennej: ';

libs/PHPMailer/language/phpmailer.lang-pt.php

@@ -0,0 +1,34 @@
+<?php
+
+/**
+ * Portuguese (European) PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author João Vieira <mail@joaovieira.eu>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Erro SMTP: Falha na autenticação.';
+$PHPMAILER_LANG['buggy_php']            = 'A sua versão do PHP tem um bug que pode causar mensagens corrompidas. Para resolver, utilize o envio por SMTP, desative a opção mail.add_x_header no ficheiro php.ini, mude para MacOS ou Linux, ou atualize o PHP para a versão 7.0.17+ ou 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Erro SMTP: Não foi possível ligar ao servidor SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Erro SMTP: Dados não aceites.';
+$PHPMAILER_LANG['empty_message']        = 'A mensagem de e-mail está vazia.';
+$PHPMAILER_LANG['encoding']             = 'Codificação desconhecida: ';
+$PHPMAILER_LANG['execute']              = 'Não foi possível executar: ';
+$PHPMAILER_LANG['extension_missing']    = 'Extensão em falta: ';
+$PHPMAILER_LANG['file_access']          = 'Não foi possível aceder ao ficheiro: ';
+$PHPMAILER_LANG['file_open']            = 'Erro ao abrir o ficheiro: ';
+$PHPMAILER_LANG['from_failed']          = 'O envio falhou para o seguinte endereço do remetente: ';
+$PHPMAILER_LANG['instantiate']          = 'Não foi possível instanciar a função mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Endereço de e-mail inválido: ';
+$PHPMAILER_LANG['invalid_header']       = 'Nome ou valor do cabeçalho inválido.';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Entrada de host inválida: ';
+$PHPMAILER_LANG['invalid_host']         = 'Host inválido: ';
+$PHPMAILER_LANG['mailer_not_supported'] = 'O cliente de e-mail não é suportado.';
+$PHPMAILER_LANG['provide_address']      = 'Deve fornecer pelo menos um endereço de destinatário.';
+$PHPMAILER_LANG['recipients_failed']    = 'Erro SMTP: Falha no envio para os seguintes destinatários: ';
+$PHPMAILER_LANG['signing']              = 'Erro ao assinar: ';
+$PHPMAILER_LANG['smtp_code']            = 'Código SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Informações adicionais SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Falha na função SMTP connect().';
+$PHPMAILER_LANG['smtp_detail']          = 'Detalhes: ';
+$PHPMAILER_LANG['smtp_error']           = 'Erro do servidor SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Não foi possível definir ou redefinir a variável: ';

libs/PHPMailer/language/phpmailer.lang-pt_br.php

@@ -0,0 +1,38 @@
+<?php
+
+/**
+ * Brazilian Portuguese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Paulo Henrique Garcia <paulo@controllerweb.com.br>
+ * @author Lucas Guimarães <lucas@lucasguimaraes.com>
+ * @author Phelipe Alves <phelipealvesdesouza@gmail.com>
+ * @author Fabio Beneditto <fabiobeneditto@gmail.com>
+ * @author Geidson Benício Coelho <geidsonc@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Erro de SMTP: Não foi possível autenticar.';
+$PHPMAILER_LANG['buggy_php']            = 'Sua versão do PHP é afetada por um bug que por resultar em messagens corrompidas. Para corrigir, mude para enviar usando SMTP, desative a opção mail.add_x_header em seu php.ini, mude para MacOS ou Linux, ou atualize seu PHP para versão 7.0.17+ ou 7.1.3+ ';
+$PHPMAILER_LANG['connect_host']         = 'Erro de SMTP: Não foi possível conectar ao servidor SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Erro de SMTP: Dados rejeitados.';
+$PHPMAILER_LANG['empty_message']        = 'Mensagem vazia';
+$PHPMAILER_LANG['encoding']             = 'Codificação desconhecida: ';
+$PHPMAILER_LANG['execute']              = 'Não foi possível executar: ';
+$PHPMAILER_LANG['extension_missing']    = 'Extensão não existe: ';
+$PHPMAILER_LANG['file_access']          = 'Não foi possível acessar o arquivo: ';
+$PHPMAILER_LANG['file_open']            = 'Erro de Arquivo: Não foi possível abrir o arquivo: ';
+$PHPMAILER_LANG['from_failed']          = 'Os seguintes remetentes falharam: ';
+$PHPMAILER_LANG['instantiate']          = 'Não foi possível instanciar a função mail.';
+$PHPMAILER_LANG['invalid_address']      = 'Endereço de e-mail inválido: ';
+$PHPMAILER_LANG['invalid_header']       = 'Nome ou valor de cabeçalho inválido';
+$PHPMAILER_LANG['invalid_hostentry']    = 'hostentry inválido: ';
+$PHPMAILER_LANG['invalid_host']         = 'host inválido: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer não é suportado.';
+$PHPMAILER_LANG['provide_address']      = 'Você deve informar pelo menos um destinatário.';
+$PHPMAILER_LANG['recipients_failed']    = 'Erro de SMTP: Os seguintes destinatários falharam: ';
+$PHPMAILER_LANG['signing']              = 'Erro de Assinatura: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() falhou.';
+$PHPMAILER_LANG['smtp_code']            = 'Código do servidor SMTP: ';
+$PHPMAILER_LANG['smtp_error']           = 'Erro de servidor SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Informações adicionais do servidor SMTP: ';
+$PHPMAILER_LANG['smtp_detail']          = 'Detalhes do servidor SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Não foi possível definir ou redefinir a variável: ';

libs/PHPMailer/language/phpmailer.lang-ro.php

@@ -0,0 +1,33 @@
+<?php
+
+/**
+ * Romanian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Eroare SMTP: Autentificarea a eșuat.';
+$PHPMAILER_LANG['buggy_php']            = 'Versiunea instalată de PHP este afectată de o problemă care poate duce la coruperea mesajelor Pentru a preveni această problemă, folosiți SMTP, dezactivați opțiunea mail.add_x_header din php.ini, folosiți MacOS/Linux sau actualizați versiunea de PHP la 7.0.17+ sau 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Eroare SMTP: Conectarea la serverul SMTP a eșuat.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Eroare SMTP: Datele nu au fost acceptate.';
+$PHPMAILER_LANG['empty_message']        = 'Mesajul este gol.';
+$PHPMAILER_LANG['encoding']             = 'Encodare necunoscută: ';
+$PHPMAILER_LANG['execute']              = 'Nu se poate executa următoarea comandă:  ';
+$PHPMAILER_LANG['extension_missing']    = 'Lipsește extensia: ';
+$PHPMAILER_LANG['file_access']          = 'Nu se poate accesa următorul fișier: ';
+$PHPMAILER_LANG['file_open']            = 'Eroare fișier: Nu se poate deschide următorul fișier: ';
+$PHPMAILER_LANG['from_failed']          = 'Următoarele adrese From au dat eroare: ';
+$PHPMAILER_LANG['instantiate']          = 'Funcția mail nu a putut fi inițializată.';
+$PHPMAILER_LANG['invalid_address']      = 'Adresa de email nu este validă: ';
+$PHPMAILER_LANG['invalid_header']       = 'Numele sau valoarea header-ului nu este validă: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Hostentry invalid: ';
+$PHPMAILER_LANG['invalid_host']         = 'Host invalid: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nu este suportat.';
+$PHPMAILER_LANG['provide_address']      = 'Trebuie să adăugați cel puțin o adresă de email.';
+$PHPMAILER_LANG['recipients_failed']    = 'Eroare SMTP: Următoarele adrese de email au eșuat: ';
+$PHPMAILER_LANG['signing']              = 'A aparut o problemă la semnarea emailului. ';
+$PHPMAILER_LANG['smtp_code']            = 'Cod SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Informații SMTP adiționale: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Conectarea la serverul SMTP a eșuat.';
+$PHPMAILER_LANG['smtp_detail']          = 'Detalii SMTP: ';
+$PHPMAILER_LANG['smtp_error']           = 'Eroare server SMTP: ';
+$PHPMAILER_LANG['variable_set']         = 'Nu se poate seta/reseta variabila. ';

libs/PHPMailer/language/phpmailer.lang-ru.php

@@ -0,0 +1,36 @@
+<?php
+
+/**
+ * Russian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Alexey Chumakov <alex@chumakov.ru>
+ * @author Foster Snowhill <i18n@forstwoof.ru>
+ * @author ProjectSoft <projectsoft2009@yandex.ru>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Ошибка SMTP: не удалось пройти аутентификацию.';
+$PHPMAILER_LANG['buggy_php']            = 'В вашей версии PHP есть ошибка, которая может привести к повреждению сообщений. Чтобы исправить, переключитесь на отправку по SMTP, отключите опцию mail.add_x_header в ваш php.ini, переключитесь на MacOS или Linux или обновите PHP до версии 7.0.17+ или 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'Ошибка SMTP: не удается подключиться к SMTP-серверу.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Ошибка SMTP: данные не приняты.';
+$PHPMAILER_LANG['empty_message']        = 'Пустое сообщение';
+$PHPMAILER_LANG['encoding']             = 'Неизвестная кодировка: ';
+$PHPMAILER_LANG['execute']              = 'Невозможно выполнить команду: ';
+$PHPMAILER_LANG['extension_missing']    = 'Расширение отсутствует: ';
+$PHPMAILER_LANG['file_access']          = 'Нет доступа к файлу: ';
+$PHPMAILER_LANG['file_open']            = 'Файловая ошибка: не удаётся открыть файл: ';
+$PHPMAILER_LANG['from_failed']          = 'Неверный адрес отправителя: ';
+$PHPMAILER_LANG['instantiate']          = 'Невозможно запустить функцию mail().';
+$PHPMAILER_LANG['invalid_address']      = 'Не отправлено из-за неправильного формата email-адреса: ';
+$PHPMAILER_LANG['invalid_header']       = 'Неверное имя или значение заголовка';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Неверная запись хоста: ';
+$PHPMAILER_LANG['invalid_host']         = 'Неверный хост: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' — почтовый сервер не поддерживается.';
+$PHPMAILER_LANG['provide_address']      = 'Вы должны указать хотя бы один адрес электронной почты получателя.';
+$PHPMAILER_LANG['recipients_failed']    = 'Ошибка SMTP: Ошибка следующих получателей: ';
+$PHPMAILER_LANG['signing']              = 'Ошибка подписи: ';
+$PHPMAILER_LANG['smtp_code']            = 'Код SMTP: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Дополнительная информация SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Ошибка соединения с SMTP-сервером.';
+$PHPMAILER_LANG['smtp_detail']          = 'Детали: ';
+$PHPMAILER_LANG['smtp_error']           = 'Ошибка SMTP-сервера: ';
+$PHPMAILER_LANG['variable_set']         = 'Невозможно установить или сбросить переменную: ';

libs/PHPMailer/language/phpmailer.lang-si.php

@@ -0,0 +1,34 @@
+<?php
+
+/**
+ * Sinhalese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Ayesh Karunaratne <ayesh@aye.sh>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP දෝෂය: සත්‍යාපනය අසාර්ථක විය.';
+$PHPMAILER_LANG['buggy_php']            = 'ඔබගේ PHP version එකෙහි පවතින දෝෂයක් නිසා email පණිවිඩ දෝෂ සහගත වීමේ හැකියාවක් ඇත. මෙය විසදීම සදහා SMTP භාවිතා කිරීම, mail.add_x_header INI setting එක අක්‍රීය කිරීම, MacOS හෝ Linux වලට මාරු වීම, හෝ ඔබගේ PHP version එක 7.0.17+ හෝ 7.1.3+ වලට අලුත් කිරීම කරගන්න.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP දෝෂය: සම්බන්ධ වීමට නොහැකි විය.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP දෝෂය: දත්ත පිළිගනු නොලැබේ.';
+$PHPMAILER_LANG['empty_message']        = 'පණිවිඩ අන්තර්ගතය හිස්';
+$PHPMAILER_LANG['encoding']             = 'නොදන්නා කේතනය: ';
+$PHPMAILER_LANG['execute']              = 'ක්‍රියාත්මක කළ නොහැකි විය: ';
+$PHPMAILER_LANG['extension_missing']    = 'Extension එක නොමැත: ';
+$PHPMAILER_LANG['file_access']          = 'File එකට ප්‍රවේශ විය නොහැකි විය: ';
+$PHPMAILER_LANG['file_open']            = 'File දෝෂය: File එක විවෘත කළ නොහැක: ';
+$PHPMAILER_LANG['from_failed']          = 'පහත From ලිපිනයන් අසාර්ථක විය: ';
+$PHPMAILER_LANG['instantiate']          = 'mail function එක ක්‍රියාත්මක කළ නොහැක.';
+$PHPMAILER_LANG['invalid_address']      = 'වලංගු නොවන ලිපිනය: ';
+$PHPMAILER_LANG['invalid_header']       = 'වලංගු නොවන header නාමයක් හෝ අගයක්';
+$PHPMAILER_LANG['invalid_hostentry']    = 'වලංගු නොවන hostentry එකක්: ';
+$PHPMAILER_LANG['invalid_host']         = 'වලංගු නොවන host එකක්: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer සහාය නොදක්වයි.';
+$PHPMAILER_LANG['provide_address']      = 'ඔබ අවම වශයෙන් එක් ලබන්නෙකුගේ ඊමේල් ලිපිනයක් සැපයිය යුතුය.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP දෝෂය: පහත ලබන්නන් අසමත් විය: ';
+$PHPMAILER_LANG['signing']              = 'Sign කිරීමේ දෝෂය: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP කේතය: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'අමතර SMTP තොරතුරු: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP සම්බන්ධය අසාර්ථක විය.';
+$PHPMAILER_LANG['smtp_detail']          = 'තොරතුරු: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP දෝෂය: ';
+$PHPMAILER_LANG['variable_set']         = 'Variable එක සැකසීමට හෝ නැවත සැකසීමට නොහැක: ';

libs/PHPMailer/language/phpmailer.lang-sk.php

@@ -0,0 +1,30 @@
+<?php
+
+/**
+ * Slovak PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Michal Tinka <michaltinka@gmail.com>
+ * @author Peter Orlický <pcmanik91@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Error: Chyba autentifikácie.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Error: Nebolo možné nadviazať spojenie so SMTP serverom.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Error: Dáta neboli prijaté';
+$PHPMAILER_LANG['empty_message']        = 'Prázdne telo správy.';
+$PHPMAILER_LANG['encoding']             = 'Neznáme kódovanie: ';
+$PHPMAILER_LANG['execute']              = 'Nedá sa vykonať: ';
+$PHPMAILER_LANG['file_access']          = 'Súbor nebol nájdený: ';
+$PHPMAILER_LANG['file_open']            = 'File Error: Súbor sa otvoriť pre čítanie: ';
+$PHPMAILER_LANG['from_failed']          = 'Následujúca adresa From je nesprávna: ';
+$PHPMAILER_LANG['instantiate']          = 'Nedá sa vytvoriť inštancia emailovej funkcie.';
+$PHPMAILER_LANG['invalid_address']      = 'Neodoslané, emailová adresa je nesprávna: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Záznam hostiteľa je nesprávny: ';
+$PHPMAILER_LANG['invalid_host']         = 'Hostiteľ je nesprávny: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' emailový klient nieje podporovaný.';
+$PHPMAILER_LANG['provide_address']      = 'Musíte zadať aspoň jednu emailovú adresu príjemcu.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Error: Adresy príjemcov niesu správne ';
+$PHPMAILER_LANG['signing']              = 'Chyba prihlasovania: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() zlyhalo.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP chyba serveru: ';
+$PHPMAILER_LANG['variable_set']         = 'Nemožno nastaviť alebo resetovať premennú: ';
+$PHPMAILER_LANG['extension_missing']    = 'Chýba rozšírenie: ';

libs/PHPMailer/language/phpmailer.lang-sl.php

@@ -0,0 +1,36 @@
+<?php
+
+/**
+ * Slovene PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Klemen Tušar <techouse@gmail.com>
+ * @author Filip Š <projects@filips.si>
+ * @author Blaž Oražem <blaz@orazem.si>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP napaka: Avtentikacija ni uspela.';
+$PHPMAILER_LANG['buggy_php']            = 'Na vašo PHP različico vpliva napaka, ki lahko povzroči poškodovana sporočila. Če želite težavo odpraviti, preklopite na pošiljanje prek SMTP, onemogočite možnost mail.add_x_header v vaši php.ini datoteki, preklopite na MacOS ali Linux, ali nadgradite vašo PHP zaličico na 7.0.17+ ali 7.1.3+.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP napaka: Vzpostavljanje povezave s SMTP gostiteljem ni uspelo.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP napaka: Strežnik zavrača podatke.';
+$PHPMAILER_LANG['empty_message']        = 'E-poštno sporočilo nima vsebine.';
+$PHPMAILER_LANG['encoding']             = 'Nepoznan tip kodiranja: ';
+$PHPMAILER_LANG['execute']              = 'Operacija ni uspela: ';
+$PHPMAILER_LANG['extension_missing']    = 'Manjkajoča razširitev: ';
+$PHPMAILER_LANG['file_access']          = 'Nimam dostopa do datoteke: ';
+$PHPMAILER_LANG['file_open']            = 'Ne morem odpreti datoteke: ';
+$PHPMAILER_LANG['from_failed']          = 'Neveljaven e-naslov pošiljatelja: ';
+$PHPMAILER_LANG['instantiate']          = 'Ne morem inicializirati mail funkcije.';
+$PHPMAILER_LANG['invalid_address']      = 'E-poštno sporočilo ni bilo poslano. E-naslov je neveljaven: ';
+$PHPMAILER_LANG['invalid_header']       = 'Neveljavno ime ali vrednost glave';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Neveljaven vnos gostitelja: ';
+$PHPMAILER_LANG['invalid_host']         = 'Neveljaven gostitelj: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer ni podprt.';
+$PHPMAILER_LANG['provide_address']      = 'Prosimo, vnesite vsaj enega naslovnika.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP napaka: Sledeči naslovniki so neveljavni: ';
+$PHPMAILER_LANG['signing']              = 'Napaka pri podpisovanju: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP koda: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'Dodatne informacije o SMTP: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Ne morem vzpostaviti povezave s SMTP strežnikom.';
+$PHPMAILER_LANG['smtp_detail']          = 'Podrobnosti: ';
+$PHPMAILER_LANG['smtp_error']           = 'Napaka SMTP strežnika: ';
+$PHPMAILER_LANG['variable_set']         = 'Ne morem nastaviti oz. ponastaviti spremenljivke: ';

libs/PHPMailer/language/phpmailer.lang-sr.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Serbian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Александар Јевремовић <ajevremovic@gmail.com>
+ * @author Miloš Milanović <mmilanovic016@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP грешка: аутентификација није успела.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP грешка: повезивање са SMTP сервером није успело.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP грешка: подаци нису прихваћени.';
+$PHPMAILER_LANG['empty_message']        = 'Садржај поруке је празан.';
+$PHPMAILER_LANG['encoding']             = 'Непознато кодирање: ';
+$PHPMAILER_LANG['execute']              = 'Није могуће извршити наредбу: ';
+$PHPMAILER_LANG['file_access']          = 'Није могуће приступити датотеци: ';
+$PHPMAILER_LANG['file_open']            = 'Није могуће отворити датотеку: ';
+$PHPMAILER_LANG['from_failed']          = 'SMTP грешка: слање са следећих адреса није успело: ';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP грешка: слање на следеће адресе није успело: ';
+$PHPMAILER_LANG['instantiate']          = 'Није могуће покренути mail функцију.';
+$PHPMAILER_LANG['invalid_address']      = 'Порука није послата. Неисправна адреса: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' мејлер није подржан.';
+$PHPMAILER_LANG['provide_address']      = 'Дефинишите бар једну адресу примаоца.';
+$PHPMAILER_LANG['signing']              = 'Грешка приликом пријаве: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Повезивање са SMTP сервером није успело.';
+$PHPMAILER_LANG['smtp_error']           = 'Грешка SMTP сервера: ';
+$PHPMAILER_LANG['variable_set']         = 'Није могуће задати нити ресетовати променљиву: ';
+$PHPMAILER_LANG['extension_missing']    = 'Недостаје проширење: ';

libs/PHPMailer/language/phpmailer.lang-sr_latn.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Serbian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Александар Јевремовић <ajevremovic@gmail.com>
+ * @author Miloš Milanović <mmilanovic016@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP greška: autentifikacija nije uspela.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP greška: povezivanje sa SMTP serverom nije uspelo.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP greška: podaci nisu prihvaćeni.';
+$PHPMAILER_LANG['empty_message']        = 'Sadržaj poruke je prazan.';
+$PHPMAILER_LANG['encoding']             = 'Nepoznato kodiranje: ';
+$PHPMAILER_LANG['execute']              = 'Nije moguće izvršiti naredbu: ';
+$PHPMAILER_LANG['file_access']          = 'Nije moguće pristupiti datoteci: ';
+$PHPMAILER_LANG['file_open']            = 'Nije moguće otvoriti datoteku: ';
+$PHPMAILER_LANG['from_failed']          = 'SMTP greška: slanje sa sledećih adresa nije uspelo: ';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP greška: slanje na sledeće adrese nije uspelo: ';
+$PHPMAILER_LANG['instantiate']          = 'Nije moguće pokrenuti mail funkciju.';
+$PHPMAILER_LANG['invalid_address']      = 'Poruka nije poslata. Neispravna adresa: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' majler nije podržan.';
+$PHPMAILER_LANG['provide_address']      = 'Definišite bar jednu adresu primaoca.';
+$PHPMAILER_LANG['signing']              = 'Greška prilikom prijave: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Povezivanje sa SMTP serverom nije uspelo.';
+$PHPMAILER_LANG['smtp_error']           = 'Greška SMTP servera: ';
+$PHPMAILER_LANG['variable_set']         = 'Nije moguće zadati niti resetovati promenljivu: ';
+$PHPMAILER_LANG['extension_missing']    = 'Nedostaje proširenje: ';

libs/PHPMailer/language/phpmailer.lang-sv.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Swedish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Johan Linnér <johan@linner.biz>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP fel: Kunde inte autentisera.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP fel: Kunde inte ansluta till SMTP-server.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP fel: Data accepterades inte.';
+//$PHPMAILER_LANG['empty_message']        = 'Message body empty';
+$PHPMAILER_LANG['encoding']             = 'Okänt encode-format: ';
+$PHPMAILER_LANG['execute']              = 'Kunde inte köra: ';
+$PHPMAILER_LANG['file_access']          = 'Ingen åtkomst till fil: ';
+$PHPMAILER_LANG['file_open']            = 'Fil fel: Kunde inte öppna fil: ';
+$PHPMAILER_LANG['from_failed']          = 'Följande avsändaradress är felaktig: ';
+$PHPMAILER_LANG['instantiate']          = 'Kunde inte initiera e-postfunktion.';
+$PHPMAILER_LANG['invalid_address']      = 'Felaktig adress: ';
+$PHPMAILER_LANG['provide_address']      = 'Du måste ange minst en mottagares e-postadress.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' mailer stöds inte.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP fel: Följande mottagare är felaktig: ';
+$PHPMAILER_LANG['signing']              = 'Signeringsfel: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP Connect() misslyckades.';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP serverfel: ';
+$PHPMAILER_LANG['variable_set']         = 'Kunde inte definiera eller återställa variabel: ';
+$PHPMAILER_LANG['extension_missing']    = 'Tillägg ej tillgängligt: ';

libs/PHPMailer/language/phpmailer.lang-tl.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Tagalog PHPMailer language file: refer to English translation for definitive list
+ *
+ *   @package PHPMailer
+ *   @author Adriane Justine Tan <eidoriantan@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Error: Hindi mapatotohanan.';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Error: Hindi makakonekta sa SMTP host.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Error: Ang datos ay hindi naitanggap.';
+$PHPMAILER_LANG['empty_message']        = 'Walang laman ang mensahe';
+$PHPMAILER_LANG['encoding']             = 'Hindi alam ang encoding: ';
+$PHPMAILER_LANG['execute']              = 'Hindi maisasagawa: ';
+$PHPMAILER_LANG['file_access']          = 'Hindi ma-access ang file: ';
+$PHPMAILER_LANG['file_open']            = 'File Error: Hindi mabuksan ang file: ';
+$PHPMAILER_LANG['from_failed']          = 'Ang sumusunod na address ay nabigo: ';
+$PHPMAILER_LANG['instantiate']          = 'Hindi maisimulan ang instance ng mail function.';
+$PHPMAILER_LANG['invalid_address']      = 'Hindi wasto ang address na naibigay: ';
+$PHPMAILER_LANG['mailer_not_supported'] = 'Ang mailer ay hindi suportado.';
+$PHPMAILER_LANG['provide_address']      = 'Kailangan mong magbigay ng kahit isang email address na tatanggap.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Error: Ang mga sumusunod na tatanggap ay nabigo: ';
+$PHPMAILER_LANG['signing']              = 'Hindi ma-sign: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Ang SMTP connect() ay nabigo.';
+$PHPMAILER_LANG['smtp_error']           = 'Ang server ng SMTP ay nabigo: ';
+$PHPMAILER_LANG['variable_set']         = 'Hindi matatakda o ma-reset ang mga variables: ';
+$PHPMAILER_LANG['extension_missing']    = 'Nawawala ang extension: ';

libs/PHPMailer/language/phpmailer.lang-tr.php

@@ -0,0 +1,43 @@
+<?php
+
+/**
+ * Turkish PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Elçin Özel
+ * @author Can Yılmaz
+ * @author Mehmet Benlioğlu
+ * @author @yasinaydin
+ * @author Ogün Karakuş
+ * @author Mustafa Deniz Buksur
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP Hatası: Oturum açılamadı.';
+$PHPMAILER_LANG['buggy_php']            = 'PHP sürümünüz iletilerin bozulmasına neden olabilecek bir hatadan etkileniyor. Bunu düzeltmek için, SMTP kullanarak göndermeye geçin, mail.add_x_header seçeneğini devre dışı bırakın php.ini dosyanızdaki mail.add_x_header seçeneğini devre dışı bırakın, MacOS veya Linux geçin veya PHP sürümünü 7.0.17+ veya 7.1.3+ sürümüne yükseltin,';
+$PHPMAILER_LANG['connect_host']         = 'SMTP Hatası: SMTP sunucusuna bağlanılamadı.';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP Hatası: Veri kabul edilmedi.';
+$PHPMAILER_LANG['empty_message']        = 'Mesajın içeriği boş';
+$PHPMAILER_LANG['encoding']             = 'Bilinmeyen karakter kodlama: ';
+$PHPMAILER_LANG['execute']              = 'Çalıştırılamadı: ';
+$PHPMAILER_LANG['extension_missing']    = 'Eklenti bulunamadı: ';
+$PHPMAILER_LANG['file_access']          = 'Dosyaya erişilemedi: ';
+$PHPMAILER_LANG['file_open']            = 'Dosya Hatası: Dosya açılamadı: ';
+$PHPMAILER_LANG['from_failed']          = 'Belirtilen adreslere gönderme başarısız: ';
+$PHPMAILER_LANG['instantiate']          = 'Örnek e-posta fonksiyonu oluşturulamadı.';
+$PHPMAILER_LANG['invalid_address']      = 'Geçersiz e-posta adresi: ';
+$PHPMAILER_LANG['invalid_header']       = 'Geçersiz başlık adı veya değeri: ';
+$PHPMAILER_LANG['invalid_hostentry']    = 'Geçersiz ana bilgisayar girişi: ';
+$PHPMAILER_LANG['invalid_host']         = 'Geçersiz ana bilgisayar: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' e-posta kütüphanesi desteklenmiyor.';
+$PHPMAILER_LANG['provide_address']      = 'En az bir alıcı e-posta adresi belirtmelisiniz.';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP Hatası: Belirtilen alıcılara ulaşılamadı: ';
+$PHPMAILER_LANG['signing']              = 'İmzalama hatası: ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP kodu: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'ek SMTP bilgileri: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP connect() fonksiyonu başarısız.';
+$PHPMAILER_LANG['smtp_detail']          = 'SMTP SMTP Detayı: ';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP sunucu hatası: ';
+$PHPMAILER_LANG['variable_set']         = 'Değişken ayarlanamadı ya da sıfırlanamadı: ';
+$PHPMAILER_LANG['no_smtputf8']          = 'Unicode adreslere gönderim için gereken SMTPUTF8 desteği sunucu tarafından desteklenmiyor.';
+$PHPMAILER_LANG['imap_recommended']     = 'Basitleştirilmiş adres ayrıştırıcısını kullanmanız önerilmez. ' .
+    'Tam RFC822 ayrıştırma için PHP IMAP eklentisini yükleyin.';
+$PHPMAILER_LANG['deprecated_argument']  = 'Kullanımdan kaldırılmış argüman: ';

libs/PHPMailer/language/phpmailer.lang-uk.php

@@ -0,0 +1,28 @@
+<?php
+
+/**
+ * Ukrainian PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Yuriy Rudyy <yrudyy@prs.net.ua>
+ * @fixed by Boris Yurchenko <boris@yurchenko.pp.ua>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Помилка SMTP: помилка авторизації.';
+$PHPMAILER_LANG['connect_host']         = 'Помилка SMTP: не вдається під\'єднатися до SMTP-серверу.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Помилка SMTP: дані не прийнято.';
+$PHPMAILER_LANG['encoding']             = 'Невідоме кодування: ';
+$PHPMAILER_LANG['execute']              = 'Неможливо виконати команду: ';
+$PHPMAILER_LANG['file_access']          = 'Немає доступу до файлу: ';
+$PHPMAILER_LANG['file_open']            = 'Помилка файлової системи: не вдається відкрити файл: ';
+$PHPMAILER_LANG['from_failed']          = 'Невірна адреса відправника: ';
+$PHPMAILER_LANG['instantiate']          = 'Неможливо запустити функцію mail().';
+$PHPMAILER_LANG['provide_address']      = 'Будь ласка, введіть хоча б одну email-адресу отримувача.';
+$PHPMAILER_LANG['mailer_not_supported'] = ' - поштовий сервер не підтримується.';
+$PHPMAILER_LANG['recipients_failed']    = 'Помилка SMTP: не вдалося відправлення для таких отримувачів: ';
+$PHPMAILER_LANG['empty_message']        = 'Пусте повідомлення';
+$PHPMAILER_LANG['invalid_address']      = 'Не відправлено через неправильний формат email-адреси: ';
+$PHPMAILER_LANG['signing']              = 'Помилка підпису: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Помилка з\'єднання з SMTP-сервером';
+$PHPMAILER_LANG['smtp_error']           = 'Помилка SMTP-сервера: ';
+$PHPMAILER_LANG['variable_set']         = 'Неможливо встановити або скинути змінну: ';
+$PHPMAILER_LANG['extension_missing']    = 'Розширення відсутнє: ';

libs/PHPMailer/language/phpmailer.lang-ur.php

@@ -0,0 +1,30 @@
+<?php
+
+/**
+ * Urdu PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author Saqib Ali Siddiqui <saqibsra@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP خرابی: تصدیق کرنے سے قاصر۔';
+$PHPMAILER_LANG['connect_host']         = 'SMTP خرابی: سرور سے منسلک ہونے سے قاصر۔';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP خرابی: ڈیٹا قبول نہیں کیا گیا۔';
+$PHPMAILER_LANG['empty_message']        = 'پیغام کی باڈی خالی ہے۔';
+$PHPMAILER_LANG['encoding']             = 'نامعلوم انکوڈنگ: ';
+$PHPMAILER_LANG['execute']              = 'عمل کرنے کے قابل نہیں ';
+$PHPMAILER_LANG['file_access']          = 'فائل تک رسائی سے قاصر:';
+$PHPMAILER_LANG['file_open']            = 'فائل کی خرابی: فائل کو کھولنے سے قاصر:';
+$PHPMAILER_LANG['from_failed']          = 'درج ذیل بھیجنے والے کا پتہ ناکام ہو گیا:';
+$PHPMAILER_LANG['instantiate']          = 'میل فنکشن کی مثال بنانے سے قاصر۔';
+$PHPMAILER_LANG['invalid_address']      = 'بھیجنے سے قاصر: غلط ای میل پتہ:';
+$PHPMAILER_LANG['mailer_not_supported'] = ' میلر تعاون یافتہ نہیں ہے۔';
+$PHPMAILER_LANG['provide_address']      = 'آپ کو کم از کم ایک منزل کا ای میل پتہ فراہم کرنا چاہیے۔';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP خرابی: درج ذیل پتہ پر نہیں بھیجا جاسکا: ';
+$PHPMAILER_LANG['signing']              = 'دستخط کی خرابی: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP ملنا ناکام ہوا';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP سرور کی خرابی: ';
+$PHPMAILER_LANG['variable_set']         = 'متغیر سیٹ نہیں کیا جا سکا: ';
+$PHPMAILER_LANG['extension_missing']    = 'ایکٹینشن موجود نہیں ہے۔ ';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP سرور کوڈ: ';
+$PHPMAILER_LANG['smtp_code_ex']         = 'اضافی SMTP سرور کی معلومات:';
+$PHPMAILER_LANG['invalid_header']       = 'غلط ہیڈر کا نام یا قدر';

libs/PHPMailer/language/phpmailer.lang-vi.php

@@ -0,0 +1,27 @@
+<?php
+
+/**
+ * Vietnamese (Tiếng Việt) PHPMailer language file: refer to English translation for definitive list.
+ * @package PHPMailer
+ * @author VINADES.,JSC <contact@vinades.vn>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'Lỗi SMTP: Không thể xác thực.';
+$PHPMAILER_LANG['connect_host']         = 'Lỗi SMTP: Không thể kết nối máy chủ SMTP.';
+$PHPMAILER_LANG['data_not_accepted']    = 'Lỗi SMTP: Dữ liệu không được chấp nhận.';
+$PHPMAILER_LANG['empty_message']        = 'Không có nội dung';
+$PHPMAILER_LANG['encoding']             = 'Mã hóa không xác định: ';
+$PHPMAILER_LANG['execute']              = 'Không thực hiện được: ';
+$PHPMAILER_LANG['file_access']          = 'Không thể truy cập tệp tin ';
+$PHPMAILER_LANG['file_open']            = 'Lỗi Tập tin: Không thể mở tệp tin: ';
+$PHPMAILER_LANG['from_failed']          = 'Lỗi địa chỉ gửi đi: ';
+$PHPMAILER_LANG['instantiate']          = 'Không dùng được các hàm gửi thư.';
+$PHPMAILER_LANG['invalid_address']      = 'Đại chỉ emai không đúng: ';
+$PHPMAILER_LANG['mailer_not_supported'] = ' trình gửi thư không được hỗ trợ.';
+$PHPMAILER_LANG['provide_address']      = 'Bạn phải cung cấp ít nhất một địa chỉ người nhận.';
+$PHPMAILER_LANG['recipients_failed']    = 'Lỗi SMTP: lỗi địa chỉ người nhận: ';
+$PHPMAILER_LANG['signing']              = 'Lỗi đăng nhập: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'Lỗi kết nối với SMTP';
+$PHPMAILER_LANG['smtp_error']           = 'Lỗi máy chủ smtp ';
+$PHPMAILER_LANG['variable_set']         = 'Không thể thiết lập hoặc thiết lập lại biến: ';
+//$PHPMAILER_LANG['extension_missing']    = 'Extension missing: ';

libs/PHPMailer/language/phpmailer.lang-zh.php

@@ -0,0 +1,29 @@
+<?php
+
+/**
+ * Traditional Chinese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author liqwei <liqwei@liqwei.com>
+ * @author Peter Dave Hello <@PeterDaveHello/>
+ * @author Jason Chiang <xcojad@gmail.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP 錯誤：登入失敗。';
+$PHPMAILER_LANG['connect_host']         = 'SMTP 錯誤：無法連線到 SMTP 主機。';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP 錯誤：無法接受的資料。';
+$PHPMAILER_LANG['empty_message']        = '郵件內容為空';
+$PHPMAILER_LANG['encoding']             = '未知編碼: ';
+$PHPMAILER_LANG['execute']              = '無法執行：';
+$PHPMAILER_LANG['file_access']          = '無法存取檔案：';
+$PHPMAILER_LANG['file_open']            = '檔案錯誤：無法開啟檔案：';
+$PHPMAILER_LANG['from_failed']          = '發送地址錯誤：';
+$PHPMAILER_LANG['instantiate']          = '未知函數呼叫。';
+$PHPMAILER_LANG['invalid_address']      = '因為電子郵件地址無效，無法傳送: ';
+$PHPMAILER_LANG['mailer_not_supported'] = '不支援的發信客戶端。';
+$PHPMAILER_LANG['provide_address']      = '必須提供至少一個收件人地址。';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP 錯誤：以下收件人地址錯誤：';
+$PHPMAILER_LANG['signing']              = '電子簽章錯誤: ';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP 連線失敗';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP 伺服器錯誤: ';
+$PHPMAILER_LANG['variable_set']         = '無法設定或重設變數: ';
+$PHPMAILER_LANG['extension_missing']    = '遺失模組 Extension: ';

libs/PHPMailer/language/phpmailer.lang-zh_cn.php

@@ -0,0 +1,36 @@
+<?php
+
+/**
+ * Simplified Chinese PHPMailer language file: refer to English translation for definitive list
+ * @package PHPMailer
+ * @author liqwei <liqwei@liqwei.com>
+ * @author young <masxy@foxmail.com>
+ * @author Teddysun <i@teddysun.com>
+ */
+
+$PHPMAILER_LANG['authenticate']         = 'SMTP 错误：登录失败。';
+$PHPMAILER_LANG['buggy_php']            = '您的 PHP 版本存在漏洞，可能会导致消息损坏。为修复此问题，请切换到使用 SMTP 发送，在您的 php.ini 中禁用 mail.add_x_header 选项。切换到 MacOS 或 Linux，或将您的 PHP 升级到 7.0.17+ 或 7.1.3+ 版本。';
+$PHPMAILER_LANG['connect_host']         = 'SMTP 错误：无法连接到 SMTP 主机。';
+$PHPMAILER_LANG['data_not_accepted']    = 'SMTP 错误：数据不被接受。';
+$PHPMAILER_LANG['empty_message']        = '邮件正文为空。';
+$PHPMAILER_LANG['encoding']             = '未知编码：';
+$PHPMAILER_LANG['execute']              = '无法执行：';
+$PHPMAILER_LANG['extension_missing']    = '缺少扩展名：';
+$PHPMAILER_LANG['file_access']          = '无法访问文件：';
+$PHPMAILER_LANG['file_open']            = '文件错误：无法打开文件：';
+$PHPMAILER_LANG['from_failed']          = '发送地址错误：';
+$PHPMAILER_LANG['instantiate']          = '未知函数调用。';
+$PHPMAILER_LANG['invalid_address']      = '发送失败，电子邮箱地址是无效的：';
+$PHPMAILER_LANG['mailer_not_supported'] = '发信客户端不被支持。';
+$PHPMAILER_LANG['provide_address']      = '必须提供至少一个收件人地址。';
+$PHPMAILER_LANG['recipients_failed']    = 'SMTP 错误：收件人地址错误：';
+$PHPMAILER_LANG['smtp_connect_failed']  = 'SMTP服务器连接失败。';
+$PHPMAILER_LANG['smtp_error']           = 'SMTP服务器出错：';
+$PHPMAILER_LANG['variable_set']         = '无法设置或重置变量：';
+$PHPMAILER_LANG['invalid_header']       = '无效的标题名称或值';
+$PHPMAILER_LANG['invalid_hostentry']    = '无效的hostentry： ';
+$PHPMAILER_LANG['invalid_host']         = '无效的主机：';
+$PHPMAILER_LANG['signing']              = '签名错误：';
+$PHPMAILER_LANG['smtp_code']            = 'SMTP代码： ';
+$PHPMAILER_LANG['smtp_code_ex']         = '附加SMTP信息： ';
+$PHPMAILER_LANG['smtp_detail']          = '详情:';

libs/PHPMailer/src/DSNConfigurator.php

@@ -0,0 +1,245 @@
+<?php
+
+/**
+ * PHPMailer - PHP email creation and transport class.
+ * PHP Version 5.5.
+ *
+ * @see https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ *
+ * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author    Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2023 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note      This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+/**
+ * Configure PHPMailer with DSN string.
+ *
+ * @see https://en.wikipedia.org/wiki/Data_source_name
+ *
+ * @author Oleg Voronkovich <oleg-voronkovich@yandex.ru>
+ */
+class DSNConfigurator
+{
+    /**
+     * Create new PHPMailer instance configured by DSN.
+     *
+     * @param string $dsn        DSN
+     * @param bool   $exceptions Should we throw external exceptions?
+     *
+     * @return PHPMailer
+     */
+    public static function mailer($dsn, $exceptions = null)
+    {
+        static $configurator = null;
+
+        if (null === $configurator) {
+            $configurator = new DSNConfigurator();
+        }
+
+        return $configurator->configure(new PHPMailer($exceptions), $dsn);
+    }
+
+    /**
+     * Configure PHPMailer instance with DSN string.
+     *
+     * @param PHPMailer $mailer PHPMailer instance
+     * @param string    $dsn    DSN
+     *
+     * @return PHPMailer
+     */
+    public function configure(PHPMailer $mailer, $dsn)
+    {
+        $config = $this->parseDSN($dsn);
+
+        $this->applyConfig($mailer, $config);
+
+        return $mailer;
+    }
+
+    /**
+     * Parse DSN string.
+     *
+     * @param string $dsn DSN
+     *
+     * @throws Exception If DSN is malformed
+     *
+     * @return array Configuration
+     */
+    private function parseDSN($dsn)
+    {
+        $config = $this->parseUrl($dsn);
+
+        if (false === $config || !isset($config['scheme']) || !isset($config['host'])) {
+            throw new Exception('Malformed DSN');
+        }
+
+        if (isset($config['query'])) {
+            parse_str($config['query'], $config['query']);
+        }
+
+        return $config;
+    }
+
+    /**
+     * Apply configuration to mailer.
+     *
+     * @param PHPMailer $mailer PHPMailer instance
+     * @param array     $config Configuration
+     *
+     * @throws Exception If scheme is invalid
+     */
+    private function applyConfig(PHPMailer $mailer, $config)
+    {
+        switch ($config['scheme']) {
+            case 'mail':
+                $mailer->isMail();
+                break;
+            case 'sendmail':
+                $mailer->isSendmail();
+                break;
+            case 'qmail':
+                $mailer->isQmail();
+                break;
+            case 'smtp':
+            case 'smtps':
+                $mailer->isSMTP();
+                $this->configureSMTP($mailer, $config);
+                break;
+            default:
+                throw new Exception(
+                    sprintf(
+                        'Invalid scheme: "%s". Allowed values: "mail", "sendmail", "qmail", "smtp", "smtps".',
+                        $config['scheme']
+                    )
+                );
+        }
+
+        if (isset($config['query'])) {
+            $this->configureOptions($mailer, $config['query']);
+        }
+    }
+
+    /**
+     * Configure SMTP.
+     *
+     * @param PHPMailer $mailer PHPMailer instance
+     * @param array     $config Configuration
+     */
+    private function configureSMTP($mailer, $config)
+    {
+        $isSMTPS = 'smtps' === $config['scheme'];
+
+        if ($isSMTPS) {
+            $mailer->SMTPSecure = PHPMailer::ENCRYPTION_STARTTLS;
+        }
+
+        $mailer->Host = $config['host'];
+
+        if (isset($config['port'])) {
+            $mailer->Port = $config['port'];
+        } elseif ($isSMTPS) {
+            $mailer->Port = SMTP::DEFAULT_SECURE_PORT;
+        }
+
+        $mailer->SMTPAuth = isset($config['user']) || isset($config['pass']);
+
+        if (isset($config['user'])) {
+            $mailer->Username = $config['user'];
+        }
+
+        if (isset($config['pass'])) {
+            $mailer->Password = $config['pass'];
+        }
+    }
+
+    /**
+     * Configure options.
+     *
+     * @param PHPMailer $mailer  PHPMailer instance
+     * @param array     $options Options
+     *
+     * @throws Exception If option is unknown
+     */
+    private function configureOptions(PHPMailer $mailer, $options)
+    {
+        $allowedOptions = get_object_vars($mailer);
+
+        unset($allowedOptions['Mailer']);
+        unset($allowedOptions['SMTPAuth']);
+        unset($allowedOptions['Username']);
+        unset($allowedOptions['Password']);
+        unset($allowedOptions['Hostname']);
+        unset($allowedOptions['Port']);
+        unset($allowedOptions['ErrorInfo']);
+
+        $allowedOptions = \array_keys($allowedOptions);
+
+        foreach ($options as $key => $value) {
+            if (!in_array($key, $allowedOptions)) {
+                throw new Exception(
+                    sprintf(
+                        'Unknown option: "%s". Allowed values: "%s"',
+                        $key,
+                        implode('", "', $allowedOptions)
+                    )
+                );
+            }
+
+            switch ($key) {
+                case 'AllowEmpty':
+                case 'SMTPAutoTLS':
+                case 'SMTPKeepAlive':
+                case 'SingleTo':
+                case 'UseSendmailOptions':
+                case 'do_verp':
+                case 'DKIM_copyHeaderFields':
+                    $mailer->$key = (bool) $value;
+                    break;
+                case 'Priority':
+                case 'SMTPDebug':
+                case 'WordWrap':
+                    $mailer->$key = (int) $value;
+                    break;
+                default:
+                    $mailer->$key = $value;
+                    break;
+            }
+        }
+    }
+
+    /**
+     * Parse a URL.
+     * Wrapper for the built-in parse_url function to work around a bug in PHP 5.5.
+     *
+     * @param string $url URL
+     *
+     * @return array|false
+     */
+    protected function parseUrl($url)
+    {
+        if (\PHP_VERSION_ID >= 50600 || false === strpos($url, '?')) {
+            return parse_url($url);
+        }
+
+        $chunks = explode('?', $url);
+        if (is_array($chunks)) {
+            $result = parse_url($chunks[0]);
+            if (is_array($result)) {
+                $result['query'] = $chunks[1];
+            }
+            return $result;
+        }
+
+        return false;
+    }
+}

libs/PHPMailer/src/Exception.php

@@ -0,0 +1,40 @@
+<?php
+
+/**
+ * PHPMailer Exception class.
+ * PHP Version 5.5.
+ *
+ * @see       https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ *
+ * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author    Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2020 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note      This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+/**
+ * PHPMailer exception handler.
+ *
+ * @author Marcus Bointon <phpmailer@synchromedia.co.uk>
+ */
+class Exception extends \Exception
+{
+    /**
+     * Prettify error message output.
+     *
+     * @return string
+     */
+    public function errorMessage()
+    {
+        return '<strong>' . htmlspecialchars($this->getMessage(), ENT_COMPAT | ENT_HTML401) . "</strong><br />\n";
+    }
+}

libs/PHPMailer/src/OAuth.php

@@ -0,0 +1,139 @@
+<?php
+
+/**
+ * PHPMailer - PHP email creation and transport class.
+ * PHP Version 5.5.
+ *
+ * @see       https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ *
+ * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author    Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2020 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note      This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+use League\OAuth2\Client\Grant\RefreshToken;
+use League\OAuth2\Client\Provider\AbstractProvider;
+use League\OAuth2\Client\Token\AccessToken;
+
+/**
+ * OAuth - OAuth2 authentication wrapper class.
+ * Uses the oauth2-client package from the League of Extraordinary Packages.
+ *
+ * @see     https://oauth2-client.thephpleague.com
+ *
+ * @author  Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ */
+class OAuth implements OAuthTokenProvider
+{
+    /**
+     * An instance of the League OAuth Client Provider.
+     *
+     * @var AbstractProvider
+     */
+    protected $provider;
+
+    /**
+     * The current OAuth access token.
+     *
+     * @var AccessToken
+     */
+    protected $oauthToken;
+
+    /**
+     * The user's email address, usually used as the login ID
+     * and also the from address when sending email.
+     *
+     * @var string
+     */
+    protected $oauthUserEmail = '';
+
+    /**
+     * The client secret, generated in the app definition of the service you're connecting to.
+     *
+     * @var string
+     */
+    protected $oauthClientSecret = '';
+
+    /**
+     * The client ID, generated in the app definition of the service you're connecting to.
+     *
+     * @var string
+     */
+    protected $oauthClientId = '';
+
+    /**
+     * The refresh token, used to obtain new AccessTokens.
+     *
+     * @var string
+     */
+    protected $oauthRefreshToken = '';
+
+    /**
+     * OAuth constructor.
+     *
+     * @param array $options Associative array containing
+     *                       `provider`, `userName`, `clientSecret`, `clientId` and `refreshToken` elements
+     */
+    public function __construct($options)
+    {
+        $this->provider = $options['provider'];
+        $this->oauthUserEmail = $options['userName'];
+        $this->oauthClientSecret = $options['clientSecret'];
+        $this->oauthClientId = $options['clientId'];
+        $this->oauthRefreshToken = $options['refreshToken'];
+    }
+
+    /**
+     * Get a new RefreshToken.
+     *
+     * @return RefreshToken
+     */
+    protected function getGrant()
+    {
+        return new RefreshToken();
+    }
+
+    /**
+     * Get a new AccessToken.
+     *
+     * @return AccessToken
+     */
+    protected function getToken()
+    {
+        return $this->provider->getAccessToken(
+            $this->getGrant(),
+            ['refresh_token' => $this->oauthRefreshToken]
+        );
+    }
+
+    /**
+     * Generate a base64-encoded OAuth token.
+     *
+     * @return string
+     */
+    public function getOauth64()
+    {
+        //Get a new token if it's not available or has expired
+        if (null === $this->oauthToken || $this->oauthToken->hasExpired()) {
+            $this->oauthToken = $this->getToken();
+        }
+
+        return base64_encode(
+            'user=' .
+            $this->oauthUserEmail .
+            "\001auth=Bearer " .
+            $this->oauthToken .
+            "\001\001"
+        );
+    }
+}

libs/PHPMailer/src/OAuthTokenProvider.php

@@ -0,0 +1,44 @@
+<?php
+
+/**
+ * PHPMailer - PHP email creation and transport class.
+ * PHP Version 5.5.
+ *
+ * @see https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ *
+ * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author    Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2020 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note      This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+/**
+ * OAuthTokenProvider - OAuth2 token provider interface.
+ * Provides base64 encoded OAuth2 auth strings for SMTP authentication.
+ *
+ * @see     OAuth
+ * @see     SMTP::authenticate()
+ *
+ * @author  Peter Scopes (pdscopes)
+ * @author  Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ */
+interface OAuthTokenProvider
+{
+    /**
+     * Generate a base64-encoded OAuth token ensuring that the access token has not expired.
+     * The string to be base 64 encoded should be in the form:
+     * "user=<user_email_address>\001auth=Bearer <access_token>\001\001"
+     *
+     * @return string
+     */
+    public function getOauth64();
+}

libs/PHPMailer/src/POP3.php

@@ -0,0 +1,483 @@
+<?php
+
+/**
+ * PHPMailer POP-Before-SMTP Authentication Class.
+ * PHP Version 5.5.
+ *
+ * @see https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
+ *
+ * @author    Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author    Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author    Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ * @author    Brent R. Matzelle (original founder)
+ * @copyright 2012 - 2020 Marcus Bointon
+ * @copyright 2010 - 2012 Jim Jagielski
+ * @copyright 2004 - 2009 Andy Prevost
+ * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
+ * @note      This program is distributed in the hope that it will be useful - WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+namespace PHPMailer\PHPMailer;
+
+/**
+ * PHPMailer POP-Before-SMTP Authentication Class.
+ * Specifically for PHPMailer to use for RFC1939 POP-before-SMTP authentication.
+ * 1) This class does not support APOP authentication.
+ * 2) Opening and closing lots of POP3 connections can be quite slow. If you need
+ *   to send a batch of emails then just perform the authentication once at the start,
+ *   and then loop through your mail sending script. Providing this process doesn't
+ *   take longer than the verification period lasts on your POP3 server, you should be fine.
+ * 3) This is really ancient technology; you should only need to use it to talk to very old systems.
+ * 4) This POP3 class is deliberately lightweight and incomplete, implementing just
+ *   enough to do authentication.
+ *   If you want a more complete class there are other POP3 classes for PHP available.
+ *
+ * @author Richard Davey (original author) <rich@corephp.co.uk>
+ * @author Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>
+ * @author Jim Jagielski (jimjag) <jimjag@gmail.com>
+ * @author Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>
+ */
+class POP3
+{
+    /**
+     * The POP3 PHPMailer Version number.
+     *
+     * @var string
+     * @deprecated This constant will be removed in PHPMailer 8.0. Use `PHPMailer::VERSION` instead.
+     */
+    const VERSION = '7.1.1';
+
+    /**
+     * Default POP3 port number.
+     *
+     * @var int
+     */
+    const DEFAULT_PORT = 110;
+
+    /**
+     * Default timeout in seconds.
+     *
+     * @var int
+     */
+    const DEFAULT_TIMEOUT = 30;
+
+    /**
+     * POP3 class debug output mode.
+     * Debug output level.
+     * Options:
+     * @see POP3::DEBUG_OFF: No output
+     * @see POP3::DEBUG_SERVER: Server messages, connection/server errors
+     * @see POP3::DEBUG_CLIENT: Client and Server messages, connection/server errors
+     *
+     * @var int
+     */
+    public $do_debug = self::DEBUG_OFF;
+
+    /**
+     * POP3 mail server hostname.
+     *
+     * @var string
+     */
+    public $host;
+
+    /**
+     * POP3 port number.
+     *
+     * @var int
+     */
+    public $port;
+
+    /**
+     * POP3 Timeout Value in seconds.
+     *
+     * @var int
+     */
+    public $tval;
+
+    /**
+     * POP3 username.
+     *
+     * @var string
+     */
+    public $username;
+
+    /**
+     * POP3 password.
+     *
+     * @var string
+     */
+    public $password;
+
+    /**
+     * Resource handle for the POP3 connection socket.
+     *
+     * @var resource
+     */
+    protected $pop_conn;
+
+    /**
+     * Are we connected?
+     *
+     * @var bool
+     */
+    protected $connected = false;
+
+    /**
+     * Error container.
+     *
+     * @var array
+     */
+    protected $errors = [];
+
+    /**
+     * Line break constant.
+     */
+    const LE = "\r\n";
+
+    /**
+     * Debug level for no output.
+     *
+     * @var int
+     */
+    const DEBUG_OFF = 0;
+
+    /**
+     * Debug level to show server -> client messages
+     * also shows clients connection errors or errors from server
+     *
+     * @var int
+     */
+    const DEBUG_SERVER = 1;
+
+    /**
+     * Debug level to show client -> server and server -> client messages.
+     *
+     * @var int
+     */
+    const DEBUG_CLIENT = 2;
+
+    /**
+     * Simple static wrapper for all-in-one POP before SMTP.
+     *
+     * @param string   $host        The hostname to connect to
+     * @param int|bool $port        The port number to connect to
+     * @param int|bool $timeout     The timeout value
+     * @param string   $username
+     * @param string   $password
+     * @param int      $debug_level
+     *
+     * @return bool
+     */
+    public static function popBeforeSmtp(
+        $host,
+        $port = false,
+        $timeout = false,
+        $username = '',
+        $password = '',
+        $debug_level = 0
+    ) {
+        $pop = new self();
+
+        return $pop->authorise($host, $port, $timeout, $username, $password, $debug_level);
+    }
+
+    /**
+     * Authenticate with a POP3 server.
+     * A connect, login, disconnect sequence
+     * appropriate for POP-before SMTP authorisation.
+     *
+     * @param string   $host        The hostname to connect to
+     * @param int|bool $port        The port number to connect to
+     * @param int|bool $timeout     The timeout value
+     * @param string   $username
+     * @param string   $password
+     * @param int      $debug_level
+     *
+     * @return bool
+     */
+    public function authorise($host, $port = false, $timeout = false, $username = '', $password = '', $debug_level = 0)
+    {
+        $this->host = $host;
+        //If no port value provided, use default
+        if (false === $port) {
+            $this->port = static::DEFAULT_PORT;
+        } else {
+            $this->port = (int) $port;
+        }
+        //If no timeout value provided, use default
+        if (false === $timeout) {
+            $this->tval = static::DEFAULT_TIMEOUT;
+        } else {
+            $this->tval = (int) $timeout;
+        }
+        $this->do_debug = (int) $debug_level;
+        $this->username = self::stripControls($username);
+        $this->password = self::stripControls($password);
+        //Reset the error log
+        $this->errors = [];
+        //Connect
+        $result = $this->connect($this->host, $this->port, $this->tval);
+        if ($result) {
+            $login_result = $this->login($this->username, $this->password);
+            if ($login_result) {
+                $this->disconnect();
+
+                return true;
+            }
+        }
+        //We need to disconnect regardless of whether the login succeeded
+        $this->disconnect();
+
+        return false;
+    }
+
+    /**
+     * Connect to a POP3 server.
+     *
+     * @param string   $host
+     * @param int|bool $port
+     * @param int      $tval
+     *
+     * @return bool
+     */
+    public function connect($host, $port = false, $tval = 30)
+    {
+        //Are we already connected?
+        if ($this->connected) {
+            return true;
+        }
+
+        //On Windows this will raise a PHP Warning error if the hostname doesn't exist.
+        //Rather than suppress it with @fsockopen, capture it cleanly instead
+        set_error_handler(function () {
+            call_user_func_array([$this, 'catchWarning'], func_get_args());
+        });
+
+        if (false === $port) {
+            $port = static::DEFAULT_PORT;
+        }
+
+        //Connect to the POP3 server
+        $errno = 0;
+        $errstr = '';
+        $this->pop_conn = fsockopen(
+            $host, //POP3 Host
+            $port, //Port #
+            $errno, //Error Number
+            $errstr, //Error Message
+            $tval
+        ); //Timeout (seconds)
+        //Restore the error handler
+        restore_error_handler();
+
+        //Did we connect?
+        if (false === $this->pop_conn) {
+            //It would appear not...
+            $this->setError(
+                "Failed to connect to server $host on port $port. errno: $errno; errstr: $errstr"
+            );
+
+            return false;
+        }
+
+        //Increase the stream time-out
+        stream_set_timeout($this->pop_conn, $tval, 0);
+
+        //Get the POP3 server response
+        $pop3_response = $this->getResponse();
+        //Check for the +OK
+        if ($this->checkResponse($pop3_response)) {
+            //The connection is established and the POP3 server is talking
+            $this->connected = true;
+
+            return true;
+        }
+
+        return false;
+    }
+
+    /**
+     * Log in to the POP3 server.
+     * Does not support APOP (RFC 2828, 4949).
+     *
+     * @param string $username
+     * @param string $password
+     *
+     * @return bool
+     */
+    public function login($username = '', $password = '')
+    {
+        if (!$this->connected) {
+            $this->setError('Not connected to POP3 server');
+            return false;
+        }
+        if (empty($username)) {
+            $username = $this->username;
+        }
+        if (empty($password)) {
+            $password = $this->password;
+        }
+        $username = self::stripControls($username);
+        $password = self::stripControls($password);
+        //Send the Username
+        $this->sendString("USER $username" . static::LE);
+        $pop3_response = $this->getResponse();
+        if ($this->checkResponse($pop3_response)) {
+            //Send the Password
+            $this->sendString("PASS $password" . static::LE);
+            $pop3_response = $this->getResponse();
+            if ($this->checkResponse($pop3_response)) {
+                return true;
+            }
+        }
+
+        return false;
+    }
+
+    /**
+     * Disconnect from the POP3 server.
+     */
+    public function disconnect()
+    {
+        // If could not connect at all, no need to disconnect
+        if ($this->pop_conn === false) {
+            return;
+        }
+
+        $this->sendString('QUIT' . static::LE);
+
+        // RFC 1939 shows POP3 server sending a +OK response to the QUIT command.
+        // Try to get it.  Ignore any failures here.
+        try {
+            $this->getResponse();
+        } catch (Exception $e) {
+            //Do nothing
+        }
+
+        //The QUIT command may cause the daemon to exit, which will kill our connection
+        //So ignore errors here
+        try {
+            @fclose($this->pop_conn);
+        } catch (Exception $e) {
+            //Do nothing
+        }
+
+        // Clean up attributes.
+        $this->connected = false;
+        $this->pop_conn  = false;
+    }
+
+    /**
+     * Get a response from the POP3 server.
+     *
+     * @param int $size The maximum number of bytes to retrieve
+     *
+     * @return string
+     */
+    protected function getResponse($size = 128)
+    {
+        $response = fgets($this->pop_conn, $size);
+        if ($this->do_debug >= self::DEBUG_SERVER) {
+            echo 'Server -> Client: ', $response;
+        }
+
+        return $response;
+    }
+
+    /**
+     * Send raw data to the POP3 server.
+     *
+     * @param string $string
+     *
+     * @return int
+     */
+    protected function sendString($string)
+    {
+        if ($this->pop_conn) {
+            if ($this->do_debug >= self::DEBUG_CLIENT) { //Show client messages when debug >= 2
+                echo 'Client -> Server: ', $string;
+            }
+
+            return fwrite($this->pop_conn, $string, strlen($string));
+        }
+
+        return 0;
+    }
+
+    /**
+     * Checks the POP3 server response.
+     * Looks for +OK or -ERR.
+     *
+     * @param string $string
+     *
+     * @return bool
+     */
+    protected function checkResponse($string)
+    {
+        if (strpos($string, '+OK') !== 0) {
+            $this->setError("Server reported an error: $string");
+
+            return false;
+        }
+
+        return true;
+    }
+
+    /**
+     * Add an error to the internal error store.
+     * Also display debug output if it's enabled.
+     *
+     * @param string $error
+     */
+    protected function setError($error)
+    {
+        $this->errors[] = $error;
+        if ($this->do_debug >= self::DEBUG_SERVER) {
+            echo '<pre>';
+            foreach ($this->errors as $e) {
+                print_r($e);
+            }
+            echo '</pre>';
+        }
+    }
+
+    /**
+     * Get an array of error messages, if any.
+     *
+     * @return array
+     */
+    public function getErrors()
+    {
+        return $this->errors;
+    }
+
+    /**
+     * POP3 connection error handler.
+     *
+     * @param int    $errno
+     * @param string $errstr
+     * @param string $errfile
+     * @param int    $errline
+     */
+    protected function catchWarning($errno, $errstr, $errfile, $errline)
+    {
+        $this->setError(
+            'Connecting to the POP3 server raised a PHP warning:' .
+            "errno: $errno errstr: $errstr; errfile: $errfile; errline: $errline"
+        );
+    }
+
+    /**
+     * Strip all control chars from a string.
+     *
+     * @param $string
+     *
+     * @return string
+     */
+    protected static function stripControls($string)
+    {
+        return preg_replace('/[\x00-\x1F\x7F]/u', '', $string);
+    }
+}

libs/Show-Hide-Passwords-Bootstrap-4/bootstrap-show-password.min.js

@@ -0,0 +1,7 @@
+/**
+ * @author Abdo-Hamoud <abdo.host@gmail.com>
+ * https://github.com/Abdo-Hamoud/bootstrap-show-password
+ * version: 1.0
+ */
+
+!function(a){a(function(){a('[data-toggle="password"]').each(function(){var b = a(this); var c = a(this).parent().find(".input-group-text"); c.css("cursor", "pointer").addClass("input-password-hide"); c.on("click", function(){if (c.hasClass("input-password-hide")){c.removeClass("input-password-hide").addClass("input-password-show"); c.find(".fa").removeClass("fa-eye").addClass("fa-eye-slash"); b.attr("type", "text")} else{c.removeClass("input-password-show").addClass("input-password-hide"); c.find(".fa").removeClass("fa-eye-slash").addClass("fa-eye"); b.attr("type", "password")}})})})}(window.jQuery);

libs/TCPDF/LICENSE.TXT

@@ -0,0 +1,860 @@
+**********************************************************************
+* TCPDF LICENSE
+**********************************************************************
+
+  TCPDF is free software: you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as
+  published by the Free Software Foundation, either version 3 of the
+  License, or (at your option) any later version.
+  
+  2002-2026 Nicola Asuni - Tecnick.com LTD
+
+**********************************************************************
+**********************************************************************
+
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.
+
+**********************************************************************
+**********************************************************************
+
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/philosophy/why-not-lgpl.html>.
+
+**********************************************************************
+**********************************************************************

libs/TCPDF/Makefile

@@ -0,0 +1,154 @@
+# Makefile
+#
+# @since       2026-04-21
+# @category    Library
+# @package     TCPDF
+# @author      Nicola Asuni <info@tecnick.com>
+# @copyright   2002-2026 Nicola Asuni - Tecnick.com LTD
+# @license     https://www.gnu.org/copyleft/lesser.html GNU-LGPL v3 (see LICENSE.TXT)
+# @link        https://github.com/tecnickcom/TCPDF
+#
+# This file is part of tcpdf software library.
+# ----------------------------------------------------------------------------------------------------------------------
+
+SHELL=/bin/bash
+.SHELLFLAGS=-o pipefail -c
+
+# Project owner
+OWNER=tecnickcom
+
+# Project vendor
+VENDOR=${OWNER}
+
+# Project name
+PROJECT=tcpdf
+
+# Project version (strip trailing line endings and accidental literal "\\n")
+VERSION=$(shell sed -E 's/\\n$$//' VERSION | tr -d '\r\n')
+
+# Current directory
+CURRENTDIR=$(dir $(realpath $(firstword $(MAKEFILE_LIST))))
+
+# Target directory
+TARGETDIR=$(CURRENTDIR)target
+
+# sed argument for in-place substitutions
+SEDINPLACE=-i
+ifeq ($(shell uname -s),Darwin)
+	SEDINPLACE=-i ''
+endif
+
+# Default port number for the example server
+PORT?=8971
+
+# PHP binary
+PHP=$(shell which php)
+
+# Composer executable
+COMPOSER=$(PHP) -d "apc.enable_cli=0" $(shell which composer)
+
+# --- MAKE TARGETS ---
+
+# Display general help about this command
+.PHONY: help
+help:
+	@echo ""
+	@echo "$(PROJECT) Makefile."
+	@echo "The following commands are available:"
+	@echo ""
+	@awk '/^## /{desc=substr($$0,4)} /^\.PHONY:/{if(NF>1) {target=$$2; if(desc) printf "  make %-15s: %s\n",target,desc; desc=""}}' Makefile
+	@echo ""
+	@echo "To test and build everything from scratch, use the shortcut:"
+	@echo "    make x"
+	@echo ""
+
+# Alias for help target
+.PHONY: all
+all: help
+
+# Test and build everything from scratch
+.PHONY: x
+x: buildall
+
+## Test and build everything from scratch
+.PHONY: buildall
+buildall: deps
+	$(MAKE) qa
+
+## Delete vendor and generated directories
+.PHONY: clean
+clean:
+	rm -rf ./vendor ./tests/vendor $(TARGETDIR) ./build ./cache
+
+## Download dependencies for the library and test harness
+.PHONY: deps
+deps: ensuretarget
+	$(COMPOSER) install --no-interaction
+	@if [ -f ./tests/composer.json ]; then \
+		$(COMPOSER) --working-dir=tests install --no-interaction; \
+	fi
+
+## Generate source code documentation with Doctum if available
+.PHONY: doc
+doc:
+	@if [ -x ./vendor/bin/doctum ]; then \
+		./vendor/bin/doctum update ./scripts/doctum.php --force; \
+	else \
+		echo "Doctum is not installed. Run make deps first."; \
+		exit 1; \
+	fi
+
+## Create missing target directories for test and build artifacts
+.PHONY: ensuretarget
+ensuretarget:
+	mkdir -p $(TARGETDIR)/test
+	mkdir -p $(TARGETDIR)/report
+	mkdir -p $(TARGETDIR)/doc
+
+## Lint PHP files (syntax only)
+.PHONY: lint
+lint:
+	find . -type f -name '*.php' \
+		-not -path './vendor/*' \
+		-not -path './tests/vendor/*' \
+		-print0 | xargs -0 -n1 -P4 $(PHP) -l > /dev/null
+
+## Run all checks
+.PHONY: qa
+qa: version ensuretarget lint test
+
+## Generate quality reports (not implemented in this legacy repository)
+.PHONY: report
+report: ensuretarget
+	@echo "No additional report target is configured for TCPDF."
+
+## Start the development server
+.PHONY: server
+server:
+	$(PHP) -t examples -S localhost:$(PORT)
+
+## Tag this git version
+.PHONY: tag
+tag:
+	git checkout main && \
+	git tag -a ${VERSION} -m "Release ${VERSION}" && \
+	git push origin --tags && \
+	git pull
+
+## Run integration tests from tests/launch.sh
+.PHONY: test
+test:
+	XDEBUG_MODE=coverage sh ./tests/launch.sh
+
+## Set the code version from the VERSION file
+.PHONY: version
+version:
+	sed $(SEDINPLACE) -E "s#^([[:space:]]*private static [^=]+ = ')[^']*';#\1${VERSION}';#" include/tcpdf_static.php
+	sed $(SEDINPLACE) -E "1,170 s#^// Version[[:space:]]+: .*#// Version     : ${VERSION}#" tcpdf.php
+	sed $(SEDINPLACE) -E "1,170 s#^ \* @version .*# * @version ${VERSION}#" tcpdf.php
+
+## Increase the version patch number
+.PHONY: versionup
+versionup:
+	echo ${VERSION} | gawk -F. '{printf("%d.%d.%d\n",$$1,$$2,(($$3+1)));}' > VERSION
+	$(MAKE) version

libs/TCPDF/README.md

@@ -0,0 +1,131 @@
+# TCPDF
+
+> Legacy PDF engine for PHP. **Deprecated** and maintained for existing integrations.
+
+[![Latest Stable Version](https://poser.pugx.org/tecnickcom/tcpdf/version)](https://packagist.org/packages/tecnickcom/tcpdf)
+[![License](https://poser.pugx.org/tecnickcom/tcpdf/license)](https://packagist.org/packages/tecnickcom/tcpdf)
+[![Downloads](https://poser.pugx.org/tecnickcom/tcpdf/downloads)](https://packagist.org/packages/tecnickcom/tcpdf)
+[![Donate via PayPal](https://img.shields.io/badge/donate-paypal-87ceeb.svg)](https://www.paypal.com/donate/?hosted_button_id=NZUEC5XS8MFBJ)
+
+If TCPDF helps your business, please consider supporting development via [PayPal](https://www.paypal.com/donate/?hosted_button_id=NZUEC5XS8MFBJ).
+
+---
+
+## Deprecation Notice
+
+TCPDF is **deprecated** and in **maintenance-only mode**.
+
+Active feature development has moved to [tc-lib-pdf](https://github.com/tecnickcom/tc-lib-pdf), the modern and modular successor.
+
+For new projects, use `tecnickcom/tc-lib-pdf`. This repository remains available for legacy systems and critical compatibility fixes.
+
+### Migration Path
+
+- New projects: install `tecnickcom/tc-lib-pdf`.
+- Existing TCPDF users: keep TCPDF for current production workloads and migrate in phases.
+- Teams seeking modern architecture, Composer-first design, and stronger type-safety should prioritize `tc-lib-pdf`.
+
+### Why Migrate to tc-lib-pdf
+
+- Modern architecture: modular libraries and cleaner component boundaries improve maintainability.
+- Better extensibility: new features are easier to add without patching a monolithic legacy core.
+- Stronger tooling fit: modern package structure works better with static analysis, CI, and automated tests.
+- Lower long-term risk: reduces technical debt tied to legacy APIs and supports ongoing PHP ecosystem evolution.
+- Improved delivery speed: teams can implement and ship new PDF capabilities with less friction.
+
+Migration still requires planning and regression checks to preserve rendering parity for existing documents.
+
+### Future Compatibility Possibility
+
+As a long-term possibility, TCPDF could be refactored to use `tc-lib-pdf` internally as a backend while preserving a practical level of backward compatibility for existing TCPDF integrations.
+
+This is not part of a committed roadmap and there is no guarantee it will happen. It is documented here only as a potential direction that may be evaluated in the future.
+
+---
+
+## Overview
+
+TCPDF is a pure-PHP library for generating PDF documents and barcodes directly in application code.
+
+It has been widely used across many PHP stacks and still provides a complete feature set for text rendering, page composition, graphics, signatures, forms, and standards-oriented output.
+
+| | |
+|---|---|
+| **Package** | `tecnickcom/tcpdf` |
+| **Author** | Nicola Asuni <info@tecnick.com> |
+| **License** | [GNU LGPL v3](https://www.gnu.org/copyleft/lesser.html) (see [LICENSE.TXT](LICENSE.TXT)) |
+| **Website** | <http://www.tcpdf.org> |
+| **Source** | <https://github.com/tecnickcom/TCPDF> |
+
+---
+
+## Features
+
+### Text & Fonts
+- UTF-8 Unicode and right-to-left (RTL) language support
+- TrueTypeUnicode, OpenTypeUnicode v1, TrueType, OpenType v1, Type1, and CID-0 fonts
+- Font subsetting
+- Text hyphenation, stretching, spacing, and rendering modes (fill/stroke/clipping)
+- Automatic line breaks, page breaks, and justification
+
+### Layout & Content
+- Standard and custom page formats, margins, and measurement units
+- XHTML + CSS rendering, JavaScript, and forms
+- Automatic headers and footers
+- Multi-column mode and no-write page regions
+- Bookmarks, named destinations, and table of contents
+- Automatic page numbering, page groups, move/delete pages, and undo transactions
+
+### Images, Graphics & Color
+- Native JPEG, PNG, and SVG support
+- Geometric drawing primitives and transformations
+- Support for GD image formats (`GD`, `GD2`, `GD2PART`, `GIF`, `JPEG`, `PNG`, `BMP`, `XBM`, `XPM`)
+- Additional formats via ImageMagick (when available)
+- JPEG/PNG ICC profiles, grayscale/RGB/CMYK/spot colors, and transparencies
+
+### Security, Standards & Advanced Output
+- Encryption up to 256-bit and digital signature certifications
+- PDF annotations (links, text, and file attachments)
+- 1D and 2D barcode support (including CODE 128, EAN/UPC, Datamatrix, QR Code, PDF417)
+- XObject templates and layers with object visibility controls
+- PDF/A-1b support
+
+---
+
+## Requirements
+
+- PHP 7.1 or later
+- `ext-curl`
+
+Optional extensions for richer output in some workflows: `gd`, `zlib`, `imagick`.
+
+---
+
+## Third-Party Fonts
+
+This library may include third-party font files released under different licenses.
+
+PHP metadata files under [fonts](fonts) are covered by the TCPDF license (GNU LGPL v3). They contain font metadata and can also be generated using TCPDF font utilities.
+
+Original binary TTF files are renamed for compatibility and compressed with PHP `gzcompress` (the `.z` format).
+
+| Prefix | Source | License |
+|---|---|---|
+| `free*` | [GNU FreeFont](https://www.gnu.org/software/freefont/) | GNU GPL v3 |
+| `pdfa*` | Derived from GNU FreeFont | GNU GPL v3 |
+| `dejavu*` | [DejaVu Fonts](http://dejavu-fonts.org) | Bitstream/DejaVu terms |
+| `ae*` | [Arabeyes.org](http://projects.arabeyes.org/) | GNU GPL v2 |
+
+For full details, see the bundled notices in the corresponding subdirectories under [fonts](fonts).
+
+---
+
+## ICC Profile
+
+TCPDF includes `sRGB.icc` from the Debian [`icc-profiles-free`](https://packages.debian.org/source/stable/icc-profiles-free) package.
+
+---
+
+## Contact
+
+Nicola Asuni <info@tecnick.com>

libs/TCPDF/VERSION

@@ -0,0 +1 @@
+6.11.3

libs/TCPDF/composer.json

@@ -0,0 +1,75 @@
+{
+    "name": "tecnickcom/tcpdf",
+    "type": "library",
+    "description": "Deprecated legacy PDF engine for PHP. For new projects use tecnickcom/tc-lib-pdf.",
+    "keywords": [
+        "PDF",
+        "tcpdf",
+        "PDFD32000-2008",
+        "qrcode",
+        "datamatrix",
+        "pdf417",
+        "barcodes"
+    ],
+    "homepage": "https://tcpdf.org",
+    "license": "LGPL-3.0-or-later",
+    "authors": [
+        {
+            "name": "Nicola Asuni",
+            "email": "info@tecnick.com",
+            "role": "lead"
+        }
+    ],
+    "require": {
+        "php": ">=7.1.0",
+        "ext-curl": "*"
+    },
+    "suggest": {
+        "tecnickcom/tc-lib-pdf": "Modern replacement for TCPDF for new projects.",
+        "ext-gd": "Enables additional image handling in some workflows.",
+        "ext-imagick": "Enables additional image format support when available.",
+        "ext-zlib": "Recommended for compressed streams and related features."
+    },
+    "minimum-stability": "dev",
+    "prefer-stable": true,
+    "config": {
+        "sort-packages": true
+    },
+    "autoload": {
+        "classmap": [
+            "config",
+            "include",
+            "tcpdf.php",
+            "tcpdf_barcodes_1d.php",
+            "tcpdf_barcodes_2d.php",
+            "include/tcpdf_colors.php",
+            "include/tcpdf_filters.php",
+            "include/tcpdf_font_data.php",
+            "include/tcpdf_fonts.php",
+            "include/tcpdf_images.php",
+            "include/tcpdf_static.php",
+            "include/barcodes/datamatrix.php",
+            "include/barcodes/pdf417.php",
+            "include/barcodes/qrcode.php"
+        ]
+    },
+    "archive": {
+        "exclude": [
+            "/.github",
+            "/.phpdoc",
+            "/examples",
+            "/scripts",
+            "/tests"
+        ]
+    },
+    "support": {
+        "issues": "https://github.com/tecnickcom/TCPDF/issues",
+        "source": "https://github.com/tecnickcom/TCPDF"
+    },
+    "funding": [
+        {
+            "type": "paypal",
+            "url": "https://www.paypal.com/donate/?hosted_button_id=NZUEC5XS8MFBJ"
+        }
+    ]
+}

libs/TCPDF/config/tcpdf_config.php

@@ -0,0 +1,235 @@
+<?php
+//============================================================+
+// File name   : tcpdf_config.php
+// Begin       : 2004-06-11
+// Last Update : 2014-12-11
+//
+// Description : Configuration file for TCPDF.
+// Author      : Nicola Asuni - Tecnick.com LTD - www.tecnick.com - info@tecnick.com
+// License     : GNU-LGPL v3 (https://www.gnu.org/copyleft/lesser.html)
+// -------------------------------------------------------------------
+// Copyright (C) 2004-2014 2026 Nicola Asuni - Tecnick.com LTD
+//
+// This file is part of TCPDF software library.
+//
+// TCPDF is free software: you can redistribute it and/or modify it
+// under the terms of the GNU Lesser General Public License as
+// published by the Free Software Foundation, either version 3 of the
+// License, or (at your option) any later version.
+//
+// TCPDF is distributed in the hope that it will be useful, but
+// WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public License
+// along with TCPDF.  If not, see <https://www.gnu.org/licenses/>.
+//
+// See LICENSE.TXT file for more information.
+//============================================================+
+
+/**
+ * Configuration file for TCPDF.
+ * @author Nicola Asuni
+ * @package com.tecnick.tcpdf
+ * @version 4.9.005
+ * @since 2004-10-27
+ */
+
+// IMPORTANT:
+// If you define the constant K_TCPDF_EXTERNAL_CONFIG, all the following settings will be ignored.
+// If you use the tcpdf_autoconfig.php, then you can overwrite some values here.
+
+
+/**
+ * Installation path (/var/www/tcpdf/).
+ * By default it is automatically calculated but you can also set it as a fixed string to improve performances.
+ */
+//define ('K_PATH_MAIN', '');
+
+/**
+ * URL path to tcpdf installation folder (http://localhost/tcpdf/).
+ * By default it is automatically set but you can also set it as a fixed string to improve performances.
+ */
+//define ('K_PATH_URL', '');
+
+/**
+ * Path for PDF fonts.
+ * By default it is automatically set but you can also set it as a fixed string to improve performances.
+ */
+//define ('K_PATH_FONTS', K_PATH_MAIN.'fonts/');
+
+/**
+ * Default images directory.
+ * By default it is automatically set but you can also set it as a fixed string to improve performances.
+ */
+//define ('K_PATH_IMAGES', '');
+
+/**
+ * Deafult image logo used be the default Header() method.
+ * Please set here your own logo or an empty string to disable it.
+ */
+//define ('PDF_HEADER_LOGO', '');
+
+/**
+ * Header logo image width in user units.
+ */
+//define ('PDF_HEADER_LOGO_WIDTH', 0);
+
+/**
+ * Cache directory for temporary files (full path).
+ */
+//define ('K_PATH_CACHE', '/tmp/');
+
+/**
+ * Generic name for a blank image.
+ */
+define ('K_BLANK_IMAGE', '_blank.png');
+
+/**
+ * Page format.
+ */
+define ('PDF_PAGE_FORMAT', 'A4');
+
+/**
+ * Page orientation (P=portrait, L=landscape).
+ */
+define ('PDF_PAGE_ORIENTATION', 'P');
+
+/**
+ * Document creator.
+ */
+define ('PDF_CREATOR', 'TCPDF');
+
+/**
+ * Document author.
+ */
+define ('PDF_AUTHOR', 'TCPDF');
+
+/**
+ * Header title.
+ */
+define ('PDF_HEADER_TITLE', 'TCPDF Example');
+
+/**
+ * Header description string.
+ */
+define ('PDF_HEADER_STRING', "by2026 Nicola Asuni - Tecnick.com\nwww.tcpdf.org");
+
+/**
+ * Document unit of measure [pt=point, mm=millimeter, cm=centimeter, in=inch].
+ */
+define ('PDF_UNIT', 'mm');
+
+/**
+ * Header margin.
+ */
+define ('PDF_MARGIN_HEADER', 5);
+
+/**
+ * Footer margin.
+ */
+define ('PDF_MARGIN_FOOTER', 10);
+
+/**
+ * Top margin.
+ */
+define ('PDF_MARGIN_TOP', 27);
+
+/**
+ * Bottom margin.
+ */
+define ('PDF_MARGIN_BOTTOM', 25);
+
+/**
+ * Left margin.
+ */
+define ('PDF_MARGIN_LEFT', 15);
+
+/**
+ * Right margin.
+ */
+define ('PDF_MARGIN_RIGHT', 15);
+
+/**
+ * Default main font name.
+ */
+define ('PDF_FONT_NAME_MAIN', 'helvetica');
+
+/**
+ * Default main font size.
+ */
+define ('PDF_FONT_SIZE_MAIN', 10);
+
+/**
+ * Default data font name.
+ */
+define ('PDF_FONT_NAME_DATA', 'helvetica');
+
+/**
+ * Default data font size.
+ */
+define ('PDF_FONT_SIZE_DATA', 8);
+
+/**
+ * Default monospaced font name.
+ */
+define ('PDF_FONT_MONOSPACED', 'courier');
+
+/**
+ * Ratio used to adjust the conversion of pixels to user units.
+ */
+define ('PDF_IMAGE_SCALE_RATIO', 1.25);
+
+/**
+ * Magnification factor for titles.
+ */
+define('HEAD_MAGNIFICATION', 1.1);
+
+/**
+ * Height of cell respect font height.
+ */
+define('K_CELL_HEIGHT_RATIO', 1.25);
+
+/**
+ * Title magnification respect main font size.
+ */
+define('K_TITLE_MAGNIFICATION', 1.3);
+
+/**
+ * Reduction factor for small font.
+ */
+define('K_SMALL_RATIO', 2/3);
+
+/**
+ * Set to true to enable the special procedure used to avoid the overlappind of symbols on Thai language.
+ */
+define('K_THAI_TOPCHARS', true);
+
+/**
+ * If true allows to call TCPDF methods using HTML syntax
+ * IMPORTANT: For security reason, disable this feature if you are printing user HTML content.
+ */
+define('K_TCPDF_CALLS_IN_HTML', false);
+
+/**
+ * List of TCPDF methods that are allowed to be called using HTML syntax.
+ * Note: each method name must end with surrounded with | (pipe) character.
+ * The constant K_TCPDF_CALLS_IN_HTML must be set to true.
+ * IMPORTANT: For security reason, disable this feature if you are allowing user HTML content.
+ */
+define('K_ALLOWED_TCPDF_TAGS', '');
+
+/**
+ * If true and PHP version is greater than 5, then the Error() method throw new exception instead of terminating the execution.
+ */
+define('K_TCPDF_THROW_EXCEPTION_ERROR', false);
+
+/**
+ * Default timezone for datetime functions
+ */
+define('K_TIMEZONE', 'UTC');
+
+//============================================================+
+// END OF FILE
+//============================================================+

libs/TCPDF/fonts/ae_fonts_2.0/COPYING

@@ -0,0 +1,343 @@
+                        -* www.gnu.org *-
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+

libs/TCPDF/fonts/ae_fonts_2.0/ChangeLog

@@ -0,0 +1,863 @@
+2007-08-20 00:48  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlArabiya.sfd: Diagonal marks
+
+2007-08-20 00:25  Khaled Hosny <khaledhosny@eglug.org>
+
+	* README: Added Release notes, preparing for 2.0 release.
+
+2007-08-19 23:19  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlArabiya.sfd: Stack diacritics definition
+
+2007-08-19 22:56  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Tholoth.sfd:
+	  * Added 'rlg' lookup table and subtable and registered stacked
+	  diacritic ligatures.
+	  * kasrah and kasratan were too close to the base glyph, fixed.
+
+2007-08-19 22:28  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlHor.sfd, ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlYarmook.sfd, ae_Arab.sfd, ae_Cortoba.sfd, ae_Furat.sfd,
+	  ae_Graph.sfd, ae_Kayrawan.sfd, ae_Khalid.sfd, ae_Mashq-Bold.sfd,
+	  ae_Mashq.sfd, ae_Metal.sfd, ae_Nada.sfd, ae_Nagham.sfd,
+	  ae_Ostorah.sfd, ae_Ouhod-Bold.sfd, ae_Petra.sfd,
+	  ae_Rasheeq-Bold.sfd, ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd,
+	  ae_Sharjah.sfd, ae_Sindbad.sfd, ae_Tarablus.sfd: Scaled up
+	  diacritic glyphs, this makes them more readable.
+
+2007-08-19 22:03  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlArabiya.sfd: New sukun, removed wrong anchors from
+	  kasrah
+
+2007-08-19 20:26  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMothnna-Bold.sfd: Added 'rlg' lookup table and subtable
+	  and registered stacked diacritic ligatures.
+
+2007-08-19 18:28  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlMothnna-Bold.sfd: Fixed shaddas
+
+2007-08-19 18:01  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlMothnna-Bold.sfd: Stacked diacrititcs
+
+2007-08-19 14:49  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: Removed mark2mark anchors, now we use
+	  ligature substitution for stacked	diacritics instead of anchors.
+	  Added 'rlg' lookup table and subtable and registered stacked
+	  diacritic ligatures.
+
+2007-08-19 02:30  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlArabiya.sfd: Stacked diacritics added
+
+2007-08-19 01:53  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ArabicReesha.sfd:
+	  * Added to new ligatures; <fathatan><alef isolated> and
+	  <fathatan><alef final>.
+	  * Small fixes to Jeem isolated width.
+
+2007-08-18 21:30  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlMothnna-Bold.sfd: Diacritics fixed except allahisolated
+	  ligature
+
+2007-08-18 20:13  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMothnna-Bold.sfd: Removed old, buggy, anchors and auto
+	  added new ones, needs manual editing.
+
+2007-08-18 19:11  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlMothnna-Bold.sfd: New shadda, modified sukun to meet the
+	  other marks
+
+2007-08-18 17:20  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_AlArabiya.sfd: New diacritics for ae_AlArabiya.sfd
+
+2007-08-17 23:19  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Tholoth.sfd: ae_Tholoth.sfd: Added glyphs U+FC5E - U+FC62.
+
+2007-08-16 14:56  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMohanad.sfd: AlMohanad: Fixed U+FEDA (kaf final) to take
+	  the shape of ordinary final kaf rather than the long variant.
+
+2007-08-15 14:25  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ArabicReesha.sfd: ArabicReesha.sfd: Fixed a bug that caused
+	  some isolated glyphs to have more space to the right.
+
+2007-08-15 12:02  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd, ae_AlYarmook.sfd,
+	  ae_Electron.sfd, ae_Hani.sfd, ae_Haramain.sfd, ae_Khalid.sfd,
+	  ae_Rasheeq-Bold.sfd, ae_Rehan.sfd, ae_Sharjah.sfd,
+	  ae_Tarablus.sfd, ae_Tholoth.sfd: Add new 'liga' table without
+	  "Ignore Combining Marks" flag, allahisolated ligature belong to that
+	  table now, so when allahisolated has a tashkil on it, the ligature
+	  will be ignored and will use normal glyphs instead.
+
+2007-08-15 11:05  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Granada.sfd, ae_Graph.sfd, ae_Haramain.sfd,
+	  ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd, ae_Sindbad.sfd,
+	  ae_Tarablus.sfd: Added "Ignore Combining Marks flag" to 'liga'
+	  table.
+
+2007-08-15 10:35  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ArabicReesha.sfd: ArabicReesha: New font based on SIL's
+	  Scheherazade, first version.
+
+2007-08-15 00:23  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: Shadda was missing mark2mark below anchor.
+
+2007-08-14 23:28  Mohammed Adnene Trojette <adn@diwi.org>
+
+	* Makefile: GPL has been removed
+
+2007-08-14 23:21  Mohammed Adnene Trojette <adn@diwi.org>
+
+	* COPYING, README: Copyright informations
+
+2007-08-14 23:05  Khaled Hosny <khaledhosny@eglug.org>
+
+	* COPYING: Updated to refer to FreeFonts project.
+
+2007-08-14 22:56  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Salem.sfd: Updated the copyright statement, to mention GPL
+	  font exception and FreeFonts project, again
+
+2007-08-14 22:43  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Salem.sfd: Revert to 1.7 and added Allah anchors(again).
+
+2007-08-14 21:35  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Tholoth.sfd: Minor positioning fix
+
+2007-08-14 21:12  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Tholoth.sfd: Added missed U+0647.
+
+2007-08-14 18:37  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlHor.sfd,
+	  ae_AlManzomah.sfd, ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlMothnna-Bold.sfd, ae_AlYarmook.sfd, ae_Arab.sfd,
+	  ae_Cortoba.sfd, ae_Dimnah.sfd, ae_Electron.sfd, ae_Furat.sfd,
+	  ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd,
+	  ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd, ae_Kayrawan.sfd,
+	  ae_Khalid.sfd, ae_Mashq-Bold.sfd, ae_Mashq.sfd, ae_Metal.sfd,
+	  ae_Nada.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Petra.sfd, ae_Rasheeq-Bold.sfd,
+	  ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd, ae_Sharjah.sfd,
+	  ae_Sindbad.sfd, ae_Tarablus.sfd, ae_Tholoth.sfd: Updated the
+	  copyright statement, to mention GPL font exception and FreeFonts
+	  project.
+
+2007-08-13 22:18  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlManzomah.sfd,
+	  ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd, ae_AlMothnna-Bold.sfd,
+	  ae_Arab.sfd, ae_Cortoba.sfd, ae_Electron.sfd, ae_Furat.sfd,
+	  ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd,
+	  ae_Hor.sfd, ae_Jet.sfd, ae_Kayrawan.sfd, ae_Mashq-Bold.sfd,
+	  ae_Mashq.sfd, ae_Nada.sfd, ae_Nagham.sfd, ae_Nice.sfd,
+	  ae_Ostorah.sfd, ae_Ouhod-Bold.sfd, ae_Petra.sfd,
+	  ae_Rasheeq-Bold.sfd, ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd,
+	  ae_Sharjah.sfd, ae_Sindbad.sfd, ae_Tarablus.sfd, ae_Tholoth.sfd:
+	  * Add missed mark2mark anchors in the affected files, though we
+	  aren't going to use this on the long run, but I'll leave that task
+	  for 2.1 .
+	  * Reencoded all files to unicode glyph map.
+
+2007-08-13 14:47  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Petra.sfd, ae_Shado.sfd: ae_Petra.sfd, ae_Shado.sfd:
+	  Full support for diacritics positioning by Osama Khalid.
+
+2007-08-13 10:38  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Hor.sfd, ae_Sharjah.sfd:
+	  * ae_Hor: Full support for diacritics positioning by Fahd.
+	  * ae_Sharjah: Full support for diacritics positioning by Fahd.
+
+2007-08-13 05:34  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/: ae_Nice.sfd, ae_Tarablus.sfd: Full diacritics supports,
+	  needs a check
+
+2007-08-13 05:24  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Nagham.sfd: Full diacritics supports, needs a check
+
+2007-08-13 05:08  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Haramain.sfd: Full diacritics supports, needs a check
+
+2007-08-13 04:42  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Graph.sfd: Full diacritics supports, needs a check
+
+2007-08-13 04:38  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Granada.sfd: Full diacritics supports, needs a check
+
+2007-08-13 03:28  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Ostorah.sfd: ae_Ostorah.sfd: Full support for diacritic
+	  positioning.
+
+2007-08-13 02:13  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Haramain.sfd: Done: replaced ugly marks, repositioned
+	  below marks
+
+2007-08-13 01:31  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Graph.sfd: Done, needs to be checked
+
+2007-08-13 01:16  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Granada.sfd: Done, needs to be checked
+
+2007-08-12 23:05  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/: ae_Tarablus.sfd: First steps
+
+2007-08-12 18:24  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Electron.sfd: ae_Electron.sfd: Full support for diacritic
+	  positioning.
+
+2007-08-12 16:06  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Hani.sfd: ae_Hani.sfd: Full support for diacritic
+	  positioning by Osama Khaled
+
+2007-08-11 23:33  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Ouhod-Bold.sfd: ae_Ouhod-Bold.sfd: Full support for
+	  diacritic positioning.
+
+2007-08-11 21:28  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Rasheeq-Bold.sfd: ae_Rasheeq-Bold.sfd: Full diacritic
+	  support.
+
+2007-08-11 15:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Hor.sfd: some fixes
+
+2007-08-11 14:55  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Electron.sfd, ae_Granada.sfd, ae_Graph.sfd,
+	  ae_Haramain.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Rasheeq-Bold.sfd, ae_Shado.sfd,
+	  ae_Sharjah.sfd, ae_Tarablus.sfd: More tweaking, it is ready for
+	  manual editing now (I hope so).
+
+2007-08-11 11:08  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Hor.sfd: Fahd: I updated the anchor points, please use
+	  this instead of the old version.
+
+2007-08-11 10:45  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Electron.sfd, ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd,
+	  ae_Haramain.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Petra.sfd, ae_Rasheeq-Bold.sfd,
+	  ae_Shado.sfd, ae_Sharjah.sfd, ae_Tarablus.sfd: Replaced old
+	  anchor points with new ones and better automatic positioning using
+	  the improved addanchors.pe script. Please update your local copy
+	  before doing any further work, this will make our life easier.
+
+2007-08-11 10:25  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/addanchors.pe: Now X and Y values are computed to produce a
+	  far better result, the needed manual tweaking is very little now.
+
+2007-08-10 01:27  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Nada.sfd: ae_Nada.sfd: Full support for diacritic
+	  positioning by Fahd AlSaidi.
+
+2007-08-07 23:47  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlYarmook.sfd:
+	  * ae_AlYarmook.sfd: Changed font name and other related feilds from
+	  AlYermook to AlYarmook
+	  * ae_AlYarmook.sfd: Full support for diacritic positioning.
+
+2007-08-07 00:22  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Mashq-Bold.sfd: sfd/ae_Mashq-Bold.sfd: Full support for
+	  diacritic positioning.
+
+2007-08-06 02:58  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Rehan.sfd: Mark to mark ligatures were too close, fixed.
+
+2007-08-04 20:14  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Rehan.sfd: ae_Rehan.sfd: Full support for diacritic
+	  positioning.
+
+2007-08-04 01:22  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Mashq.sfd: ae_Mashq.sfd: Full support for diacritic
+	  positioning.
+
+2007-08-04 01:19  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Khalid.sfd: Reencoded the file to Unicode.
+
+2007-08-04 01:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Kayrawan.sfd: Fixed ArabicMark2MarkBelow anchor point.
+	  Reencoded the file to Unicode.
+
+2007-08-03 06:12  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Kayrawan.sfd: Fixed two letters ligatures diacritics
+
+2007-08-03 05:55  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Kayrawan.sfd: Added لله ligature diacritics
+
+2007-08-03 05:01  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Kayrawan.sfd: Ignore combining marks set
+
+2007-08-03 04:51  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Kayrawan.sfd: Full diacritics support -
+	  ArabicMark2MarkBelow need to be checked
+
+2007-08-03 02:40  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Salem.sfd: Added and positioned anchors for Allah glyph.
+
+2007-08-03 02:32  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Dimnah.sfd: ae_Dimnah.sfd: Full support for diacritic
+	  positioning.
+
+2007-08-03 01:26  Youssef Chahibi <chahibi@gmail.com>
+
+	* sfd/ae_Kayrawan.sfd: First steps in font editing
+
+2007-08-03 00:10  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Salem.sfd: ae_Salem.sfd: Full diacritic support.
+
+2007-08-02 04:50  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Arab.sfd: Fixed ligatures anchor points.
+
+2007-08-02 02:15  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Arab.sfd: Support for diacritic positioning by Osama
+	  Khalid.
+
+2007-08-01 23:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlManzomah.sfd: ae_AlManzomah.sfd: Full support for
+	  diacritic positioning.
+
+2007-08-01 01:56  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Khalid.sfd: ae_Khalid.sfd: Full support for diacritic
+	  positioning.
+
+2007-07-28 11:43  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMateen-Bold.sfd: ae_AlMateen-Bold.sfd: Full support for
+	  diacritic positioning.
+
+2007-07-27 22:16  Afief Halumi <afief.h@gmail.com>
+
+	* Makefile: New make targets as requested by KhaledHosney.
+
+2007-07-27 21:04  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlHor.sfd: ae_AlHor.sfd: Full diacritic support
+
+2007-07-26 10:14  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Jet.sfd: ./sfd/ae_Jet.sfd: Full diacritic support.
+
+2007-07-26 01:38  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Japan.sfd: Aeif, you forgot the ligatures and letter beh
+	  isolated, fixed
+
+2007-07-25 14:41  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Metal.sfd: Add anchor points for لله ligature
+
+2007-07-25 12:52  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Metal.sfd: ae_Metal: Full diacritic support.
+
+2007-07-25 01:36  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Japan.sfd: ae_Japan: Full diacritic support.
+
+2007-07-25 01:28  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Cortoba.sfd: minor fix
+
+2007-07-25 00:24  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Cortoba.sfd:
+
+	  ----------------------------------------------------------------------ae_Cortoba.sfd: Full support for diacritic positioning.
+
+2007-07-24 18:34  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/generate.sh: not needed any more, use 'make' instead
+
+2007-07-24 18:31  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Sindbad.sfd: Add anchor points for لله ligature
+
+2007-07-24 18:04  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: Fixed ligatures anchor points
+
+2007-07-24 17:55  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Furat.sfd: Add anchor points for لله ligature
+
+2007-07-23 23:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* README, README.cvs:
+	  - new readme file to explain how to build ttf onts from our cvs
+	  tree.
+
+2007-07-23 23:01  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlBattar.sfd: few fixes in the diacritic positions
+
+2007-07-23 13:56  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlBattar.sfd: ae_AlBattar.sfd, full support for diacritic
+	  positioning.
+
+2007-07-23 05:28  Afief Halumi <afief.h@gmail.com>
+
+	* Makefile: Now doesn't rebuild untouched fonts, should save some
+	  server cycles.
+
+2007-07-23 04:00  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Sindbad.sfd: Unchecked 'compact' option
+
+2007-07-23 00:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Sindbad.sfd:
+	  - Add the missed "Ignore Combining Marks" feature to Arabic liga
+	  lookuptable, Afief please remember this.
+	  - Few changes in ArabicBelow anchor points placement.
+
+2007-07-22 14:42  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlBattar.sfd: Diacritic support, for isolated glyphs only.
+
+2007-07-22 00:43  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Sindbad.sfd: Full support for diacritic positioning.
+
+2007-07-21 21:38  Khaled Hosny <khaledhosny@eglug.org>
+
+	* Makefile: fixed "clean" to remove the bzipped archive.
+
+2007-07-21 21:34  Khaled Hosny <khaledhosny@eglug.org>
+
+	* Makefile:
+	  - All files are under ae_fonts dir now.
+	  - The archive is bzipped.
+
+2007-07-21 20:05  Afief Halumi <afief.h@gmail.com>
+
+	* Makefile: Committed the Makefile. Hope you like it.
+
+2007-07-21 19:11  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/generate.pe: Add a usage note.
+
+2007-07-21 19:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/generate.pe: Now accepts a 2nd argument for the .ttf file
+	  name.
+
+2007-07-21 18:52  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Tholoth.sfd: A few fixes in positioning.
+
+2007-07-21 16:48  Afief Halumi <afief.h@gmail.com>
+
+	* sfd/ae_Tholoth.sfd: Finished work on ae_Tholoth.sfd; Added a few
+	  better glyphs and full support for diacritic positioning.
+
+2007-07-21 00:04  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Tholoth.sfd:
+
+	  Diacritics work by afief
+
+2007-07-19 23:49  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/addanchors.pe: Add support for mark2glyph anchor points,
+	  thanks George Williams for fixing fontforge's bug.
+
+2007-07-19 23:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlBattar.sfd, ae_AlHor.sfd, ae_AlManzomah.sfd,
+	  ae_AlMateen-Bold.sfd, ae_AlYarmook.sfd, ae_Arab.sfd,
+	  ae_Cortoba.sfd, ae_Dimnah.sfd, ae_Electron.sfd, ae_Granada.sfd,
+	  ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd, ae_Hor.sfd,
+	  ae_Japan.sfd, ae_Jet.sfd, ae_Kayrawan.sfd, ae_Khalid.sfd,
+	  ae_Mashq-Bold.sfd, ae_Mashq.sfd, ae_Metal.sfd, ae_Nada.sfd,
+	  ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd, ae_Ouhod-Bold.sfd,
+	  ae_Petra.sfd, ae_Rasheeq-Bold.sfd, ae_Rehan.sfd, ae_Salem.sfd,
+	  ae_Shado.sfd, ae_Sharjah.sfd, ae_Sindbad.sfd, ae_Tarablus.sfd,
+	  ae_Tholoth.sfd:
+
+	  - Removed Cyrillic and Greek glyphs, this makes the font more
+	  lighter.
+	  - Add all needed anchor points, still needs to be manually adjusted.
+
+2007-07-19 23:15  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlMohanad.sfd, ae_AlMothnna-Bold.sfd, ae_Furat.sfd:
+	  Removed Cyrillic and Greek glyphs, this makes the font more lighter.
+
+2007-07-19 23:12  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: full support for diacritic positioning
+
+2007-07-18 14:57  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd:
+
+	  Full mark2base and mark2mark anchor points
+
+2007-07-16 20:53  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Nada.sfd:
+
+	  Removed obsolete reference to Btstream copyright, we don't include
+	  any Bitstream copyrighted glyphs anymore.
+
+2007-07-16 20:03  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/: addanchors.pe, addlookups.pe, cp.pe, generate.pe:
+
+	  use "#!/usr/bin/env fontforge" instead of "#!/usr/bin/fontforge"
+
+2007-07-16 13:47  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMohanad.sfd:
+
+	  Full support for proper diacritics positioning
+
+2007-07-16 00:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/: addanchors.pe, addlookups.pe, cp.pe, generate.pe: Now the
+	  scripts require Fotforge 20070501 or newer, older versions use older
+	  SFD formate which we don't suport.
+
+2007-07-16 00:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: Add support for proper diacritic
+	  positioning by Afief Halumi, still in progress
+
+2007-07-15 23:48  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Furat.sfd: full support for diacritic positioning
+
+2007-07-15 20:08  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlBattar.sfd, ae_AlHor.sfd, ae_AlManzomah.sfd,
+	  ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd, ae_AlYarmook.sfd,
+	  ae_Arab.sfd, ae_Cortoba.sfd, ae_Dimnah.sfd, ae_Electron.sfd,
+	  ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd,
+	  ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd, ae_Kayrawan.sfd,
+	  ae_Khalid.sfd, ae_Mashq-Bold.sfd, ae_Mashq.sfd, ae_Metal.sfd,
+	  ae_Nada.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Petra.sfd, ae_Rasheeq-Bold.sfd,
+	  ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd, ae_Sharjah.sfd,
+	  ae_Sindbad.sfd, ae_Tarablus.sfd, ae_Tholoth.sfd: removed traces
+	  of ae_ prefix
+
+2007-07-15 19:44  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlArabiya.sfd: removed traces of ae_ prefix
+
+2007-07-13 20:14  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMothnna-Bold.sfd:
+	  - Removed traces of ae_ prefix.
+	  - Full support for proper Arabic diacritics positioning.
+
+2007-07-13 19:38  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Furat.sfd:
+	  - Removed traces of ae_ prefix.
+	  - add anchor points for Arabic diacritics, needs manual tuning.
+
+2007-07-13 19:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/: addanchors.pe, addlookups.pe: scripts to assist adding
+	  lookup tables and anchor points needed for proper diacritics
+	  (harakat) support.
+
+2007-07-01 03:31  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlHor.sfd,
+	  ae_AlManzomah.sfd, ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlMothnna-Bold.sfd, ae_AlYarmook.sfd, ae_Arab.sfd,
+	  ae_Cortoba.sfd, ae_Dimnah.sfd, ae_Electron.sfd, ae_Furat.sfd,
+	  ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd,
+	  ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd, ae_Kayrawan.sfd,
+	  ae_Khalid.sfd, ae_Mashq-Bold.sfd, ae_Mashq.sfd, ae_Metal.sfd,
+	  ae_Nada.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Petra.sfd, ae_Rasheeq-Bold.sfd,
+	  ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd, ae_Sharjah.sfd,
+	  ae_Sindbad.sfd, ae_Tarablus.sfd, ae_Tholoth.sfd: Removed ae_
+	  prefix from all fonts, see
+	  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=361965
+
+2007-06-30 22:02  Khaled Hosny <khaledhosny@eglug.org>
+
+	* README: Initial README file
+
+2007-06-30 20:20  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/: generate.pe, generate.sh: Scripts to generate TTF files
+	  from SFD ones.
+
+2007-06-30 19:58  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Tarablus.sfd: add the missed U+F6BE that caused bug in 'j'
+	  glyph, CVS_SILENT
+
+2007-06-30 19:48  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Sindbad.sfd:
+	   add the missed U+F6BE that caused bug in 'j' glyph, CVS_SILENT
+
+2007-06-23 22:29  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Shado.sfd, ae_Sharjah.sfd: add the missed U+F6BE that
+	  caused bug in 'j' glyph
+
+2007-06-23 22:26  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Rasheeq-Bold.sfd, ae_Rehan.sfd, ae_Salem.sfd: add the
+	  missed U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:22  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Nice.sfd, ae_Ostorah.sfd, ae_Ouhod-Bold.sfd,
+	  ae_Petra.sfd: add the missed U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:19  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Metal.sfd, ae_Nada.sfd, ae_Nagham.sfd: add the missed
+	  U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:16  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Kayrawan.sfd, ae_Khalid.sfd, ae_Mashq-Bold.sfd,
+	  ae_Mashq.sfd: add the missed U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:12  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Haramain.sfd, ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd: add
+	  the missed U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:09  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd: add the missed
+	  U+F6BE that caused bug in 'j' glyph
+
+2007-06-23 22:05  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Electron.sfd, ae_Furat.sfd: add the missed U+F6BE that
+	  caused bug in 'j' glyph
+
+2007-06-23 22:02  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Cortoba.sfd, ae_Dimnah.sfd: add the missed U+F6BE that
+	  caused bug in 'j' glyph
+
+2007-06-23 21:59  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlYarmook.sfd, ae_Arab.sfd: add the missed U+F6BE that
+	  caused bug in 'j' glyph
+
+2007-06-23 21:19  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlHor.sfd,
+	  ae_AlManzomah.sfd, ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlMothnna-Bold.sfd: Added the missed U+U+F6BE glyphs which
+	  caused a bug in "j" glyph
+
+2007-06-23 18:30  Khaled Hosny <khaledhosny@eglug.org>
+
+	* COPYING: -Moved GPL to a separate file.  -Added GPL font
+	  exception to COPYING.
+
+2007-06-23 18:12  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_Tholoth.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 18:07  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Shado.sfd, ae_Sharjah.sfd, ae_Sindbad.sfd,
+	  ae_Tarablus.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 18:04  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Petra.sfd, ae_Rasheeq-Bold.sfd, ae_Rehan.sfd,
+	  ae_Salem.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 18:01  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:57  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Metal.sfd, ae_Nada.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:54  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Kayrawan.sfd, ae_Khalid.sfd, ae_Mashq-Bold.sfd,
+	  ae_Mashq.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:51  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Haramain.sfd, ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:47  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Furat.sfd, ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:43  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_Arab.sfd, ae_Cortoba.sfd, ae_Dimnah.sfd,
+	  ae_Electron.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:40  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlMothnna-Bold.sfd, ae_AlYarmook.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-23 17:37  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlHor.sfd,
+	  ae_AlManzomah.sfd:
+	  - New glyphs (covering every thing outside Arabic block) based on
+	  the GPL'd FreeFont project [http://www.nongnu.org/freefont/].
+	  - Arabic diacritic marks (harakat) are set to have zero advance
+	  width and OT class as 'mark' nstead of 'base glyph'
+
+2007-06-21 05:57  Khaled Hosny <khaledhosny@eglug.org>
+
+	* tools/cp.pe: Simple ff script to copy a specific range of glyphs
+	  from on font to another.
+
+2007-06-16 01:54  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMothnna-Bold.sfd:
+	  - Identical glyphs (or parts of glyphs) are referenced to one common
+	  glyph instead of copying the same shape each time.
+	  - Add few missed Arabic glyphs, DOTLESS QAF, DOTLESS BEH, HAMZA
+	  ABOVE, HAMZA BELOW and EXTENDED ARABIC-INDIC DIGIT ZERO, ONE, TWO,
+	  THREE, SEVEN, EIGHT, NINE.
+
+2007-06-15 07:10  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/: ae_AlArabiya.sfd, ae_AlBattar.sfd, ae_AlHor.sfd,
+	  ae_AlManzomah.sfd, ae_AlMateen-Bold.sfd, ae_AlMohanad.sfd,
+	  ae_AlMothnna-Bold.sfd, ae_AlYarmook.sfd, ae_Arab.sfd,
+	  ae_Cortoba.sfd, ae_Dimnah.sfd, ae_Electron.sfd, ae_Furat.sfd,
+	  ae_Granada.sfd, ae_Graph.sfd, ae_Hani.sfd, ae_Haramain.sfd,
+	  ae_Hor.sfd, ae_Japan.sfd, ae_Jet.sfd, ae_Kayrawan.sfd,
+	  ae_Khalid.sfd, ae_Mashq-Bold.sfd, ae_Mashq.sfd, ae_Metal.sfd,
+	  ae_Nada.sfd, ae_Nagham.sfd, ae_Nice.sfd, ae_Ostorah.sfd,
+	  ae_Ouhod-Bold.sfd, ae_Petra.sfd, ae_Rasheeq-Bold.sfd,
+	  ae_Rehan.sfd, ae_Salem.sfd, ae_Shado.sfd, ae_Sharjah.sfd,
+	  ae_Sindbad.sfd, ae_Tarablus.sfd, ae_Tholoth.sfd: Preparing to
+	  work
+
+2007-06-02 21:25  Khaled Hosny <khaledhosny@eglug.org>
+
+	* sfd/ae_AlMothnna-Bold.sfd:
+	  - A modified version of "AlMothnna", partially fixes the vowel marks
+	  issues.
+	  - This is fontforg's sfd file.
+
+2004-07-10 09:48  nadim
+
+	* COPYING: + Minor mods to the GPL license mention (their address
+	  changed) + Added disclaimer + Renamed file from license.txt for
+	  consistency
+

libs/TCPDF/fonts/ae_fonts_2.0/README

@@ -0,0 +1,58 @@
+This project aims at increasing the number of available Arabic free and
+open source fonts. The goals of this project are,
+
+ * Create and/or salvage high quality free and open TTF Arabic fonts.
+
+ * Create a central repository of all free and open source Arabic fonts
+(TTF and otherwise) in order to get them included into the various
+distributions.
+
+ * To better couple and artistically match Arabic fonts to their latin
+counterparts.
+
+You can visit our web page
+http://www.arabeyes.org/project.php?proj=Khotot
+
+This software package/product and attached documentations are provided
+"as is", with no warranty.
+
+                     -* www.arabeyes.org *-
+
+If you'd like to help the Arabeyes Project, then consider:
+
+  http://www.arabeyes.org/donate.php
+
+Typeface and data © 2003-2007, Arabeyes.org.
+
+Latin glyphs (U+0021-U+007E, U+00A1-U+0237, U+1E00-U+1EF9 and
+U+FB00-U+FB06 Unicode ranges) are based on "Free UCS Outline Fonts",
+www.nongnu.org/freefont (Copyleft 2002, 2003, 2005 Free Software
+Foundation).
+
+These fonts are subject to the GNU GENERAL PUBLIC (GPL) LICENSE (Version 2).
+See COPYING for details or https://www.gnu.org/copyleft/gpl.html
+
+As a special exception, if you create a document which uses this
+font, and embed this font or unaltered portions of this font into the
+document, this font does not by itself cause the resulting document to
+be covered by the GNU General Public License. This exception does not
+however invalidate any other reasons why the document might be covered
+by the GNU General Public License. If you modify this font, you may
+extend this exception to your version of the font, but you are not
+obligated to do so. If you do not wish to do so, delete this exception
+statement from your version.
+
+Release Notes
+-------------
+2.0
+This the second major release of Arabeyes fonts, this release features:
+  * Completely new Latin Glyphs, based on font distributed by FreeFonts project
+    (See the legal notes above)
+  * Proper support for Arabic diacritics; all fonts now have anchor points
+    adjusted manually to fit nicely with each glyph.
+  * Diacritics for AlMothnna, AlArabiya and Tholoth fonts have been redisigned
+    too look better and fit with the style of the font.
+  * We dropped ae_ prefix from all fonts, so please fix your configuration
+    files.
+  * Various other small fixes, see ChangeLog file for details.
+

libs/TCPDF/fonts/courier.php

@@ -0,0 +1,12 @@
+<?php
+// TCPDF FONT FILE DESCRIPTION
+$type='core';
+$name='Courier';
+$up=-100;
+$ut=50;
+$dw=600;
+$diff='';
+$enc='';
+$desc=array('Flags'=>33,'FontBBox'=>'[-23 -250 715 805]','ItalicAngle'=>0,'Ascent'=>805,'Descent'=>-250,'Leading'=>0,'CapHeight'=>562,'XHeight'=>426,'StemV'=>51,'StemH'=>51,'AvgWidth'=>600,'MaxWidth'=>600,'MissingWidth'=>600);
+$cw=array(0=>600,1=>600,2=>600,3=>600,4=>600,5=>600,6=>600,7=>600,8=>600,9=>600,10=>600,11=>600,12=>600,13=>600,14=>600,15=>600,16=>600,17=>600,18=>600,19=>600,20=>600,21=>600,22=>600,23=>600,24=>600,25=>600,26=>600,27=>600,28=>600,29=>600,30=>600,31=>600,32=>600,33=>600,34=>600,35=>600,36=>600,37=>600,38=>600,39=>600,40=>600,41=>600,42=>600,43=>600,44=>600,45=>600,46=>600,47=>600,48=>600,49=>600,50=>600,51=>600,52=>600,53=>600,54=>600,55=>600,56=>600,57=>600,58=>600,59=>600,60=>600,61=>600,62=>600,63=>600,64=>600,65=>600,66=>600,67=>600,68=>600,69=>600,70=>600,71=>600,72=>600,73=>600,74=>600,75=>600,76=>600,77=>600,78=>600,79=>600,80=>600,81=>600,82=>600,83=>600,84=>600,85=>600,86=>600,87=>600,88=>600,89=>600,90=>600,91=>600,92=>600,93=>600,94=>600,95=>600,96=>600,97=>600,98=>600,99=>600,100=>600,101=>600,102=>600,103=>600,104=>600,105=>600,106=>600,107=>600,108=>600,109=>600,110=>600,111=>600,112=>600,113=>600,114=>600,115=>600,116=>600,117=>600,118=>600,119=>600,120=>600,121=>600,122=>600,123=>600,124=>600,125=>600,126=>600,127=>600,128=>600,129=>600,130=>600,131=>600,132=>600,133=>600,134=>600,135=>600,136=>600,137=>600,138=>600,139=>600,140=>600,141=>600,142=>600,143=>600,144=>600,145=>600,146=>600,147=>600,148=>600,149=>600,150=>600,151=>600,152=>600,153=>600,154=>600,155=>600,156=>600,157=>600,158=>600,159=>600,160=>600,161=>600,162=>600,163=>600,164=>600,165=>600,166=>600,167=>600,168=>600,169=>600,170=>600,171=>600,172=>600,173=>600,174=>600,175=>600,176=>600,177=>600,178=>600,179=>600,180=>600,181=>600,182=>600,183=>600,184=>600,185=>600,186=>600,187=>600,188=>600,189=>600,190=>600,191=>600,192=>600,193=>600,194=>600,195=>600,196=>600,197=>600,198=>600,199=>600,200=>600,201=>600,202=>600,203=>600,204=>600,205=>600,206=>600,207=>600,208=>600,209=>600,210=>600,211=>600,212=>600,213=>600,214=>600,215=>600,216=>600,217=>600,218=>600,219=>600,220=>600,221=>600,222=>600,223=>600,224=>600,225=>600,226=>600,227=>600,228=>600,229=>600,230=>600,231=>600,232=>600,233=>600,234=>600,235=>600,236=>600,237=>600,238=>600,239=>600,240=>600,241=>600,242=>600,243=>600,244=>600,245=>600,246=>600,247=>600,248=>600,249=>600,250=>600,251=>600,252=>600,253=>600,254=>600,255=>600);
+// --- EOF ---

libs/TCPDF/fonts/courierb.php

@@ -0,0 +1,12 @@
+<?php
+// TCPDF FONT FILE DESCRIPTION
+$type='core';
+$name='Courier-Bold';
+$up=-100;
+$ut=50;
+$dw=600;
+$diff='';
+$enc='';
+$desc=array('Flags'=>33,'FontBBox'=>'[-113 -250 749 801]','ItalicAngle'=>0,'Ascent'=>801,'Descent'=>-250,'Leading'=>0,'CapHeight'=>562,'XHeight'=>439,'StemV'=>106,'StemH'=>84,'AvgWidth'=>600,'MaxWidth'=>600,'MissingWidth'=>600);
+$cw=array(0=>600,1=>600,2=>600,3=>600,4=>600,5=>600,6=>600,7=>600,8=>600,9=>600,10=>600,11=>600,12=>600,13=>600,14=>600,15=>600,16=>600,17=>600,18=>600,19=>600,20=>600,21=>600,22=>600,23=>600,24=>600,25=>600,26=>600,27=>600,28=>600,29=>600,30=>600,31=>600,32=>600,33=>600,34=>600,35=>600,36=>600,37=>600,38=>600,39=>600,40=>600,41=>600,42=>600,43=>600,44=>600,45=>600,46=>600,47=>600,48=>600,49=>600,50=>600,51=>600,52=>600,53=>600,54=>600,55=>600,56=>600,57=>600,58=>600,59=>600,60=>600,61=>600,62=>600,63=>600,64=>600,65=>600,66=>600,67=>600,68=>600,69=>600,70=>600,71=>600,72=>600,73=>600,74=>600,75=>600,76=>600,77=>600,78=>600,79=>600,80=>600,81=>600,82=>600,83=>600,84=>600,85=>600,86=>600,87=>600,88=>600,89=>600,90=>600,91=>600,92=>600,93=>600,94=>600,95=>600,96=>600,97=>600,98=>600,99=>600,100=>600,101=>600,102=>600,103=>600,104=>600,105=>600,106=>600,107=>600,108=>600,109=>600,110=>600,111=>600,112=>600,113=>600,114=>600,115=>600,116=>600,117=>600,118=>600,119=>600,120=>600,121=>600,122=>600,123=>600,124=>600,125=>600,126=>600,127=>600,128=>600,129=>600,130=>600,131=>600,132=>600,133=>600,134=>600,135=>600,136=>600,137=>600,138=>600,139=>600,140=>600,141=>600,142=>600,143=>600,144=>600,145=>600,146=>600,147=>600,148=>600,149=>600,150=>600,151=>600,152=>600,153=>600,154=>600,155=>600,156=>600,157=>600,158=>600,159=>600,160=>600,161=>600,162=>600,163=>600,164=>600,165=>600,166=>600,167=>600,168=>600,169=>600,170=>600,171=>600,172=>600,173=>600,174=>600,175=>600,176=>600,177=>600,178=>600,179=>600,180=>600,181=>600,182=>600,183=>600,184=>600,185=>600,186=>600,187=>600,188=>600,189=>600,190=>600,191=>600,192=>600,193=>600,194=>600,195=>600,196=>600,197=>600,198=>600,199=>600,200=>600,201=>600,202=>600,203=>600,204=>600,205=>600,206=>600,207=>600,208=>600,209=>600,210=>600,211=>600,212=>600,213=>600,214=>600,215=>600,216=>600,217=>600,218=>600,219=>600,220=>600,221=>600,222=>600,223=>600,224=>600,225=>600,226=>600,227=>600,228=>600,229=>600,230=>600,231=>600,232=>600,233=>600,234=>600,235=>600,236=>600,237=>600,238=>600,239=>600,240=>600,241=>600,242=>600,243=>600,244=>600,245=>600,246=>600,247=>600,248=>600,249=>600,250=>600,251=>600,252=>600,253=>600,254=>600,255=>600);
+// --- EOF ---

libs/TCPDF/fonts/courierbi.php

@@ -0,0 +1,12 @@
+<?php
+// TCPDF FONT FILE DESCRIPTION
+$type='core';
+$name='Courier-BoldOblique';
+$up=-100;
+$ut=50;
+$dw=600;
+$diff='';
+$enc='';
+$desc=array('Flags'=>97,'FontBBox'=>'[-57 -250 869 801]','ItalicAngle'=>-12,'Ascent'=>801,'Descent'=>-250,'Leading'=>0,'CapHeight'=>562,'XHeight'=>439,'StemV'=>106,'StemH'=>84,'AvgWidth'=>600,'MaxWidth'=>600,'MissingWidth'=>600);
+$cw=array(0=>600,1=>600,2=>600,3=>600,4=>600,5=>600,6=>600,7=>600,8=>600,9=>600,10=>600,11=>600,12=>600,13=>600,14=>600,15=>600,16=>600,17=>600,18=>600,19=>600,20=>600,21=>600,22=>600,23=>600,24=>600,25=>600,26=>600,27=>600,28=>600,29=>600,30=>600,31=>600,32=>600,33=>600,34=>600,35=>600,36=>600,37=>600,38=>600,39=>600,40=>600,41=>600,42=>600,43=>600,44=>600,45=>600,46=>600,47=>600,48=>600,49=>600,50=>600,51=>600,52=>600,53=>600,54=>600,55=>600,56=>600,57=>600,58=>600,59=>600,60=>600,61=>600,62=>600,63=>600,64=>600,65=>600,66=>600,67=>600,68=>600,69=>600,70=>600,71=>600,72=>600,73=>600,74=>600,75=>600,76=>600,77=>600,78=>600,79=>600,80=>600,81=>600,82=>600,83=>600,84=>600,85=>600,86=>600,87=>600,88=>600,89=>600,90=>600,91=>600,92=>600,93=>600,94=>600,95=>600,96=>600,97=>600,98=>600,99=>600,100=>600,101=>600,102=>600,103=>600,104=>600,105=>600,106=>600,107=>600,108=>600,109=>600,110=>600,111=>600,112=>600,113=>600,114=>600,115=>600,116=>600,117=>600,118=>600,119=>600,120=>600,121=>600,122=>600,123=>600,124=>600,125=>600,126=>600,127=>600,128=>600,129=>600,130=>600,131=>600,132=>600,133=>600,134=>600,135=>600,136=>600,137=>600,138=>600,139=>600,140=>600,141=>600,142=>600,143=>600,144=>600,145=>600,146=>600,147=>600,148=>600,149=>600,150=>600,151=>600,152=>600,153=>600,154=>600,155=>600,156=>600,157=>600,158=>600,159=>600,160=>600,161=>600,162=>600,163=>600,164=>600,165=>600,166=>600,167=>600,168=>600,169=>600,170=>600,171=>600,172=>600,173=>600,174=>600,175=>600,176=>600,177=>600,178=>600,179=>600,180=>600,181=>600,182=>600,183=>600,184=>600,185=>600,186=>600,187=>600,188=>600,189=>600,190=>600,191=>600,192=>600,193=>600,194=>600,195=>600,196=>600,197=>600,198=>600,199=>600,200=>600,201=>600,202=>600,203=>600,204=>600,205=>600,206=>600,207=>600,208=>600,209=>600,210=>600,211=>600,212=>600,213=>600,214=>600,215=>600,216=>600,217=>600,218=>600,219=>600,220=>600,221=>600,222=>600,223=>600,224=>600,225=>600,226=>600,227=>600,228=>600,229=>600,230=>600,231=>600,232=>600,233=>600,234=>600,235=>600,236=>600,237=>600,238=>600,239=>600,240=>600,241=>600,242=>600,243=>600,244=>600,245=>600,246=>600,247=>600,248=>600,249=>600,250=>600,251=>600,252=>600,253=>600,254=>600,255=>600);
+// --- EOF ---